Range of BS1212-4 (2016) compact type float operated valves for WC flushing cisterns, with either bottom entry (A28-06 XXX models) or side entry (A28-06 side). The inlet incorporates a plastic strainer. Maximum working pressure 10.0 Bar Cold Water Use Only

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

250402701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Unitop logo, BS1212-4 & datum level on body.

Installation Requirements:

R001 R550 R560 R562

Expiry date:

30/04/2030

Model:

A28-06 341 A28-06 331 A28-06 311 A28-06 279 A28-06 254 A28-06 Side

Manufacturer:

Xiamen Unitop Plumbing Technology Co Ltd

Company Name

Xiamen Unitop Plumbing Technology Co Ltd

Address

No. 1 Building No. 469 Jinyuan West Road Xinglin

Country

Jimei District

Phone

+86 592 6379968

View All Listings by this Company

Range of bottom entry BS1212-4 (2016) delayed or non delayed (all models)action type float operated valves for WC flushing cisterns. Maximum working pressure 10.0 Bar, cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

251202702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

WDI logo, ECO and model on float, BS1212-4 on body of inlet valve.

Installation Requirements:

R001 R550 R560

Expiry date:

31/12/2030

Model:

B3861 Bottom entry inlet valve with G1/2” plastic thread B3861 Bottom entry inlet valve with G1/2” brass thread B3862 Bottom entry inlet valve with G1/2” plastic thread B3862 Bottom entry inlet valve with G1/2” brass thread B3863 Bottom entry inlet valve with G1/2” plastic thread B3863 Bottom entry inlet valve with G1/2” brass thread

Approval Holder:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Manufacturer:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Floor mounted, single outlet (swivel) combination tap assembly (brass bodies - various finishes), incorporating ceramic cartridge headworks with single lever operating member and a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3). The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose and handset. Maximum working pressure 5.0 Bar. Maximum operating temperature 65.0°C.

Section:

0466 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)

WRAS Approval Number:

250702005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Coalbrook logo on back of spout

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2030

Model:

XX 2001 YY Model added January 2026: XX 2009 YY XX denotes the trim and can be replaced with: DO – Domo DC – Decca Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal BB = Brushed Brass

Approval Holder:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

Country

United Kingdom

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The product incorporates a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3) Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

0531 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)

WRAS Approval Number:

250402016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4" BSP (M) X 1/2" BSP (M) offset union

Marking:

Hansgrohe logo on operating member.

Installation Requirements:

R001 R040

Expiry date:

30/04/2030

Model:

75 423 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

View All Listings by this Company

Range of single check valve assemblies consisting of a single check valve cartridge housed within a DZR brass body. Compression connections on for use with popper pipe to BS EN1057. Maximum working pressure 16 Bar. Maximum operating temperature 65°C.

Section:

0030 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.

WRAS Approval Number:

250402704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

RWC logo, CR, flow arrow, size, EB on body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

FLOW235001 15mm compression inlet/outlet FLOW235002 22mm compression inlet/outlet FLOW235003 28mm compression inlet/outlet FLOW235004 ½” BSP F inlet/outlet FLOW235005 ¾” BSP F inlet/outlet FLOW235006 1” BSP F inlet/outlet FLOW235007 1 ¼” BSP F inlet/outlet FLOW235008 1 ½” BSP F inlet/outlet FLOW235009 2” BSP F inlet/outlet

Approval Holder:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company