‘AquaGas M range’ of copper and brass press fit fittings with NBR ‘O’-rings for use with copper tube (manufactured to BS EN 1057). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312074

Size:

15 - 54mm. ½” - 2” BSP (M)/(F).

Marking:

PCC GmbH logo (PC), DVGW, size and date of manufacture (YY-MM) on fitting body.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Press-Copper AquaGas M range: Brass (15-28mm) or Copper (35-54mm) fittings: 79010: Straight Male Adapter, 79020: Straight Female Adapter. Copper fittings: 79000: Straight Coupling, 79030: Straight Reducer, 79040: Slip Coupler, 79100: Equal Tee, 79110: Reduced Tee, 79120: Female Tee, 79200: Bend 90° ff, 79210: Bend 90° mf, 79230: Bend 45° ff, 79240: Bend 45° mf, 79410: End Cap, 79430: Male Reducer.

Approval Holder:

PCC GmbH

Company Name

PCC GmbH

Address

Dusseldorfer Strasse 15, D-71332 Wailblingen

Country

Germany

View All Listings by this Company

Range of blue epoxy coated ductile iron flanged dismantling fittings with EPDM sealing rings. Maximum working pressure 16.0 Bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1220 Fittings for use with Tube and Pipe

Section Subtitle:

Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.

WRAS Approval Number:

2312021

Size:

DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1100, DN1200, DN1400, DN1500, DN1600 & DN1800 Flanged

Marking:

Vortex Qingdao logo and size on plate on body. Size and PN on body.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

WD8616B

Approval Holder:

Vortex Qingdao Pipe Fitting Co., Ltd.

Company Name

Vortex Qingdao Pipe Fitting Co., Ltd.

Address

No.4, chongxiang Road, Lancun Town, Jimo District, Qingdao, Shandong Province

Country

China

View All Listings by this Company

Range of pipe repair clamps incorporating EPDM double seals. The products are intended for use with stainless steel pipe manufactured to EN1124. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1220 Fittings for use with Tube and Pipe

Section Subtitle:

Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.

WRAS Approval Number:

2312067

Size:

See models

Marking:

Dalian logo and size on clamp body.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

CR-XXX Where XXX denotes the size and can be replaced with any of the following: 50 = DN50, 65 = DN65, 80 = DN80, 100 = DN100, 150 = DN150, 200 = DN200, 250 = DN250, 300 = DN300, 350 = DN350, 400 = DN400, 500 = DN500, 600 = DN600, 700 = DN700, 800 = DN800.

Approval Holder:

Dalian Zhuhong Mechanical Co. Ltd.

Company Name

Dalian Zhuhong Mechanical Co. Ltd.

Address

Floor 1-4,No.366,Xiaoyanjia Building, Hongta Village,Yongzheng Street, Jinzhou District,Dalian City,Liaoning Province, CHINA

Country

China

View All Listings by this Company

Manufacturer:

Dalian Zhuhong Mechanical Co. Ltd.

Company Name

Dalian Zhuhong Mechanical Co. Ltd.

Address

Floor 1-4,No.366,Xiaoyanjia Building, Hongta Village,Yongzheng Street, Jinzhou District,Dalian City,Liaoning Province, CHINA

Country

China

View All Listings by this Company

Range of manually operated dual flush WC outlet valves. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2310393

Size:

1 ½” BSP (M), 2” BSP (M).

Marking:

Wirquin moulded on body.

Installation Requirements:

R001 R571 R580 R581

Expiry date:

31/10/2028

Model:

B24004 NABIS manually operated dual flush WC outlet valves.

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of WC dual flush drop valves with ABS bodies and silicone seals. The valves are operated via a two push button assembly for either full or reduced flush and incorporate an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2311084

Size:

2” BSP (M)

Marking:

UK Bathrooms Ltd on body.

Installation Requirements:

R001 R571 R580 R581

Expiry date:

30/11/2028

Model:

B218M B228 B2650

Approval Holder:

UK Bathrooms Ltd

Company Name

UK Bathrooms Ltd

Address

Aston House Redburn Road Newcastle Upon Tyne

Postcode

NE5 1NB

View All Listings by this Company