‘Drei Bond 5204’. Yellow coloured anaerobic adhesive paste. For use with water up to 85°C. This product is to be applied and cured in strict accordance with the manufacturer's instructions.

Section:

5520 Sealants - Screwed Joints

Section Subtitle:

Anaerobic adhesives. These products are to be applied and cured in strict accordance with the manufacturer's instructions

WRAS Approval Number:

2312551

Expiry date:

31/12/2028

Approval Holder:

Drei Bond GmbH

Company Name

Drei Bond GmbH

View All Listings by this Company

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies), incorporating a solenoid valve controlling the flow which is actuated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The product also incorporates an integral hand dryer. Maximum working pressure 8.0 Bar

Non-metallic materials and components comply with BS6920 at 43°C

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

2312040

Size:

½” BSP M

Marking:

Dyson and Model on top of tap body

Installation Requirements:

R001 R006 R007

Expiry date:

31/12/2028

Model:

WD04 WD05

Approval Holder:

Dyson Manufacturing SDN BHD.

Company Name

Dyson Manufacturing SDN BHD.

Address

Plo 208 Jalan Cyber 14 Senai Industrial Etsate IV

Country

81400 Senai

View All Listings by this Company

Wall mounted single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies), incorporating a solenoid valve controlling the flow which is actuated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The product also incorporates an integral hand dryer. Maximum working pressure 8.0 Bar

Non-metallic materials and components comply with BS6920 at 43°C

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

2312041

Size:

½” BSP M

Marking:

Dyson and Model on top of tap body

Installation Requirements:

R001 R007 R040

Expiry date:

31/12/2028

Model:

WD06

Approval Holder:

Dyson Manufacturing SDN BHD.

Company Name

Dyson Manufacturing SDN BHD.

Address

Plo 208 Jalan Cyber 14 Senai Industrial Etsate IV

Country

81400 Senai

View All Listings by this Company

Range of BS1212-4 (2016) float operated valves for WC flushing cisterns, bottom or side entry type with plastic or brass ½’’ BSP inlet. The inlet incorporates a strainer, Compact models incorporate a delay fill function. Maximum working pressure 10.0 bar. For use with cold water only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

240801001

Basis of Compliance:

Tested to a standard assessed as an appropriate British Standard by WRAS

Size:

½" BSP (M) inlet.

Marking:

Dudley BS1212/4 on front nut. Hydroflo and WRAS approved product on overhead discharge nozzle.

Installation Requirements:

R001 R550 R560 R562

Expiry date:

31/08/2029

Model:

Hydroflo Range Standard (Plastic or Brass Inlet): Hydroflo Side Inlet. Hydroflo Pedestal 8”, 8½”, 9”, 9½”, 10”, 10½”, 11”, 11½”, 12”. Hydroflo Compact Range Standard (Plastic or Brass Inlet): Hydroflo Side Inlet (Delayed Fill). Hydroflo Pedestal 8”, 8½”, 9”, 9½”, 10”, 10½”, 11”, 11½”, 12” (Delayed Fill). Hydroflo Range Enhanced (Plastic or Brass Inlet): Hydroflo Side Inlet. Hydroflo Pedestal 8”, 8½”, 9”, 9½”, 10”, 10½”, 11”, 11½”, 12”. Hydroflo Telescopic Hydroflo Compact Range Enhanced (Plastic or Brass Inlet): Hydroflo Side Inlet (Delayed Fill). Hydroflo Pedestal 8”, 8½”, 9”, 9½”, 10”, 10½”, 11”, 11½”, 12” (Delayed Fill). Hydroflo Telescopic (Delayed Fill). Hydroflo Range Flow Regulated (Plastic or Brass Inlet): Hydroflo Side Inlet. Hydroflo Pedestal 8”, 8½”, 9”, 9½”, 10”, 10½”, 11”, 11½”, 12”. Hydroflo Compact Range Flow Regulated (Plastic or Brass Inlet): Hydroflo Side Inlet (Delayed Fill). Hydroflo Pedestal 8”, 8½”, 9”, 9½”, 10”, 10½”, 11”, 11½”, 12” (Delayed Fill).

Product Images

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Manufacturer:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3.5 litres. The cistern is operated by an electronically controlled flush valve. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

2301369

Size:

½” BSP (M)

Marking:

Dolphin logo on flush panel Dolphin logo, Date of manufacturer DD.MM.YY on adhesive label, 6L & waterline mould on plastic support for flush valve

Installation Requirements:

R001 R556 R581

Expiry date:

31/01/2028

Model:

DB551x.E Dolphin Blue 126mm Electronic Cistern

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

View All Listings by this Company