Range of stainless steel press-fit fittings (316L) and pipes (316L - EN 10312), the fitttings incorporate EPDM O-rings. Crimp joint is achieved by a M profile crimp jaws. Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312316

Size:

see models

Marking:

Fittings - CHNCON & Size on body. Pipe – CHNCON & Size.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

SM01 EQUAL COUPLING: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM02 SLIP COUPLING: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM03 REDUCER MF: 18-15mm, 22-15mm, 22-18mm, 28-15mm, 28-18mm, 28-22mm, 35-18mm, 35-22mm, 35-28mm, 42-22mm, 42-28mm, 42-35mm, 54-22mm, 54-28mm, 54-35mm, 54-42mm, 76.1-42mm, 76.1-54mm, 88.9-54mm, 88.9-76.1mm, 108-76.1mm, 108-88.9mm. SM04 90° ELBOW FF: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM05 90°ELBOW MF: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM06 45° ELBOW FF: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM07 45° ELBOW MF: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SS01 90° ELBOW WITH PLANE ENDS: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SS02 SHORT PIPE BRIDGE: 15mm, 18mm, 22mm, 28mm. SS03 LONG PIPE BRIDGE: 15mm, 18mm, 22mm, 28mm. SM08 EQUAL TEE: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM09 REDUCING TEE: 18-15-18mm, 22-15-22mm, 22-18-22mm, 28-15-28mm, 28-18-28mm, 28-22-28mm, 35-15-35mm, 35-18-35mm, 35-22-35mm, 35-28-35mm, 42-15-42mm, 42-18-42mm, 42-22-42mm, 42-28-42mm, 42-35-42mm, 54-15-54mm, 54-18-54mm, 54-22-54mm, 54-28-54mm, 54-35-54mm, 54-42-54mm, 76.1-22-76.1mm, 76.1-28-76.1mm, 76.1-35-76.1mm, 76.1-42-76.1mm, 76.1-54-76.1mm, 88.9-22-88.9mm, 88.9-28-88.9mm, 88.9-35-88.9mm, 88.9-42-88.9mm, 88.9-54-88.9mm, 88.9-76.1-88.9mm, 108-22-108mm, 108-28-108mm, 108-35-108mm, 108-42-108mm, 108-54-108mm, 108-76.1-108mm, 108-88.9-108mm. SM10 TEE WITH MALE THREAD END: 15-R 1/2''-15mm, 18-R 1/2''-18mm, 22-R 3/4''-22mm, 28-R 1''-28mm, 35-R 1 1/4''-35mm. SM11 TEE WITH FEMALE THREAD END: 15-Rp 1/2''-15mm, 18-Rp 1/2''-18mm, 18-Rp 3/4''-18mm, 22-Rp 1/2''-22mm, 22-Rp 3/4''-22mm, 28-Rp 1/2''-28mm, 28-Rp 3/4''-28mm, 28-Rp 1''-28mm, 35-Rp 1/2''-35mm, 35-Rp 3/4''-35mm, 35-Rp 1''-35mm, 35-Rp 1 1/4''-35mm, 42-Rp 1/2''-42mm, 42-Rp 3/4''-42mm, 42-Rp 1''-42mm, 42-Rp 1 1/2''-42mm, 54-Rp 1/2''-54mm, 54-Rp 3/4''-54mm, 54-Rp 1''-54mm, 54-Rp 2''-54mm, 76.1-Rp 3/4''-76.1mm, 76.1-Rp 2''-76.1mm, 88.9-Rp 3/4''-88.9mm, 88.9-Rp 2''- 88.9mm, 108-Rp 3/4''-108mm, 108-Rp 2''-108mm. SM12 90° FEMALE ELBOW: 15mm-Rp 1/2'', 18mm-Rp 1/2'', 22mm-Rp 3/4'' , 28mm-Rp 1''. SM13 90° ELBOW WITH MALE THREAD END: 15mm-R 1/2'', 18mm-R 1/2'', 22mm-R 3/4'' , 28mm-R 1'', 35mm-R 1 1/4'', 42mm-R 1 1/2'', 54mm-R 2''. SM14 90°ELBOW WITH FEMALE THREAD END: 15mm-R 1/2'', 18mm-R 1/2'', 22mm-R 3/4'' , 28mm-R 1'', 35mm-R 1 1/4'', 42mm-R 1 1/2'', 54mm-R 2''. SM15 FEMALE ELBOW WITH WALL PLATE: NW-15mm-Rp 1/2'', NW-18mm-Rp 1/2'', NW-22mm-Rp 1/2''. SM16 MALE ADAPTOR: 15mm-R 1/2'', 18mm-R 1/2'', 18mm-R 3/4'', 22mm-R 1/2'', 22mm-R 3/4'', 22mm-R 1'', 28mm-R 3/4'', 28mm-R 1'', 35mm-R 1'', 35mm-R 1 1/4'', 42mm-R 1 1/4'', 42mm-R 1 1/2'', 54mm-R 1 1/2'', 54mm-R 2'', SM17 FEMALE ADAPTOR: 15mm-Rp 1/2'', 15mm-Rp 3/4'', 18mm-Rp 1/2'', 18mm-Rp 3/4'', 22mm-Rp 1/2'', 22mm-Rp 3/4'', 22mm-Rp 1'', 28mm-Rp 3/4'', 28mm-Rp 1'', 35mm-Rp 1'', 35mm-Rp 1 1/4'', 42mm-Rp 1 1/4'', 42mm-Rp 1 1/2'', 54mm-Rp 1 1/2'', 54mm-Rp 2''. SS04 MALE CONNECTOR: 15mm- 1/2'', 18mm- 3/4'', 22mm- 3/4'' , 28mm- 1'', 35mm- 1 1/4'', 42mm- 1 1/2'', 54mm- 2''. SS05 FEMALE CONNECTOR: 15mm- 1/2'', 18mm- 3/4'', 22mm- 3/4'' , 28mm- 1'', 35mm- 1 1/4'', 42mm- 1 1/2'', 54mm- 2''. SM18 ADAPTOR WITH UNION NUT: 15mm- 1/2'', 18mm- 3/4'', 22mm- 3/4'' , 22mm- 1'', 28mm- 1'', 28mm- 1 1/4'', 35mm- 1 1/4'', 42mm- 1 1/2'', 54mm- 2''. SM19 ADAPTOR UNION WITH MALE THREAD: 15mm- 1/2'', 18mm- 3/4'', 22mm- 3/4'' , 28mm- 1'', 35mm- 1 1/4'', 42mm- 1 1/2'', 54mm- 2''. SM20 ADAPTOR UNION WITH FEMALE THREAD: 15mm- 1/2'', 18mm- 3/4'', 22mm- 3/4'' , 28mm- 1'', 35mm- 1 1/4'', 42mm- 1 1/2'', 54mm- 2''. SM21 CAP: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM22 FLANGE WITH PRESS-JOINT: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SP 1620 Stainless Steel Pipe - Φ x TH: 15mm x 1, 18mm x 1, 22mm x 1.2, 28mm x 1.2, 35mm x 1.5, 42mm x 1.5, 54mm x 1.5, 76.1mm x 2, 88.9mm x 2, 108mm x 2.

Approval Holder:

ZHEJIANG ZHENGKANG INDUSTRIAL CO.,LTD.

Company Name

ZHEJIANG ZHENGKANG INDUSTRIAL CO.,LTD.

Address

: NO.678 Dingxiang Road, Binhai Garden, Economic and Technological Development Zone, Wenzhou

Country

China

View All Listings by this Company

Range of stainless steel press-fit fittings (316L or 304) and pipes (SUS316L or SUS304 - EN 10312), the fitttings incorporate EPDM O-rings. Crimp joint is achieved by a M profile crimp jaws. Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312317

Size:

see models

Marking:

Fittings - PIPRESS, size and stainless steel grade (SUS316L or SUS304). Pipe - PIPRESS, size and stainless steel grade (SUS316L or SUS304).

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Stainless Steel Press Connector: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press Adjustable Connector: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press Reducing connector: 18x15mm, 22x15mm, 22x18mm, 28x15mm, 28x18mm, 28x22mm, 35x15mm, 35x18mm, 35x22mm, 35x28mm, 42x15mm, 42x18mm, 42x22mm, 42x28mm, 42x35mm, 54x15mm, 54x18mm, 54x22mm, 54x28mm, 54x35mm, 54x42mm, 76.1x54mm, 88.9x54mm, 88.9x76.1mm, 108x54mm, 108x76.1mm, 108x88.9mm. Stainless Steel Press B-type reducing connector: 18x15mm, 22x15mm, 22x18mm, 28x15mm, 28x18mm, 28x22mm, 35x15mm, 35x18mm, 35x22mm, 35x28mm, 42x15mm, 42x18mm, 42x22mm, 42x28mm, 42x35mm, 54x15mm, 54x18mm, 54x22mm, 54x28mm, 54x35mm, 54x42mm, 76.1x54mm, 88.9x54mm, 88.9x76.1mm, 108x54mm, 108x76.1mm, 108x88.9mm. Stainless Steel Press A-type 90°elbow: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press B-type 90°elbow: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press A-type 45°elbow: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press B-type 45°elbow: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press End cap: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press Equal tee: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press Reducing Tee: 18×15mm, 22×15mm, 22×18mm, 28×15mm, 28×18mm, 28×22mm, 35×15mm, 35×18mm, 35×22mm, 35×28mm, 42×15mm, 42×18mm, 42×22mm, 42×28mm, 42×35mm, 54×15mm, 54×18mm, 54×22mm, 54×28mm, 54×35mm, 54×42mm, 76.1×22mm, 76.1×28mm, 76.1×35mm, 76.1×42mm, 76.1×54mm, 88.9×22mm, 88.9×28mm, 88.9×35mm, 88.9×42mm, 88.9×54mm, 88.9×76.1mm, 108×22mm, 108×28mm, 108×35mm, 108×42mm, 108×54mm, 108×76.1mm, 108×88.9mm. Stainless Steel Pipe Bridge: 15mm, 18mm, 22mm, 28mm. Stainless Steel Press Female adapter: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×3/4'', 28mm×1'', 35mm×1'', 35mm×1-1/4'', 35mm×1-1/2'', 42mm×1-1/4'', 42mm×1-1/2'', 54mm×1-1/2'', 54mm×2'', 76.1mm×2-1/2'', 88.9mm×3'', 108mm×4''. Stainless Steel Press Female Swivel adapter: 15mm×1/2'', 15mm×3/4'', 18mm×1/2'', 18mm×3/4'', 22mm×3/4'', 22mm×1‘’, 28mm×1'', 28mm×1-1/4'', 35mm×1-1/4'', 35mm×1-1/2'', 42mm×1-1/2'', 42mm×2'', 54mm×2'', 76.1mm×2-1/2'', 88.9mm×3'', 108mm×4''. Stainless Steel Press Male threaded adapter: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×3/4'', 28mm×1'', 35mm×1'', 35mm×1-1/4'', 35mm×1-1/2'', 42mm×1-1/4'', 42mm×1-1/2'', 54mm×1-1/2'', 54mm×2'', 76.1mm×2-1/2'', 88.9mm×3'', 108mm×4''. Stainless Steel Press Female threaded 90°elbow: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×1'', 35mm×1-1/4'', 42mm×1-1/2'', 54mm×2''. Stainless Steel Press Female threaded 90°elbow with bracket: 15mm×1/2'', 18mm×1/2'', 22mm×1/2'', 22mm×3/4'', 28mm×1'', 35mm×1-1/4''. Stainless Steel Press Female Short 90°elbow: 15mm×1/2'', 18mm×1/2'', 22mm×1/2'', 22mm×3/4'', 28mm×1'', 35mm×1-1/4''. Stainless Steel Press Male threaded 90°elbow: 15mm× 1/2'', 18mm× 1/2'', 22mm× 1/2'', 22mm× 3/4'', 28mm× 1'', 35mm× 1-1/4'', 42mm× 1-1/2'', 54mm× 1-1/2'', 54mm× 2''. Stainless Steel Press Female Threaded Tee: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×1/2'', 28mm×3/4'', 28mm×1'', 35mm×1/2'', 35mm×3/4'', 35mm×1'', 35mm×1-1/4'', 42mm×1/2'', 42mm×3/4'', 42mm×1-1/2'', 54mm×1/2'', 54mm×3/4'', 54mm×2'', 76.1mm×3/4'', 76.1mm×2'', 88.9mm×3/4'', 88.9mm×2'', 108mm×3/4'', 108mm×2''. Stainless Steel Press Male Threaded Tee: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×1/2'', 28mm×3/4'', 28mm×1'', 35mm×3/4'', 35mm×1-1/4'', 42mm×3/4'', 42mm×1-1/2'', 54mm×3/4'', 54mm×2'', 76.1mm×3/4'', 76.1mm×2'', 88.9mm×3/4'', 88.9mm×2'', 108mm×3/4'', 108mm×2''. Stainless Steel Press Flange: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press 3Pcs Union Male swivel adapter: 15mm×1/2'', 15mm×3/4'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 22mm×1'', 28mm×3/4'', 28mm×1'', 35mm×1-1/4'', 35mm×1-1/2'', 42mm×1-1/2'', 54mm×2'', 76.1mm×3/4'', 76.1mm×2'', 88.9mm×3/4'', 88.9mm×2'', 108mm×3/4'', 108mm×2''. PIPRESS-Stainless Steel Pipe: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm.

Approval Holder:

ZHEJIANG QILU TECHNOLOGY CO., LTD.

Company Name

ZHEJIANG QILU TECHNOLOGY CO., LTD.

Address

BUILDING24, No.1399 LIANGMU ROAD, HANGZHOU

Country

China

View All Listings by this Company

Geberit range of ‘FlowFit’ press Fittings for use with ‘Geberit FlowFit Pipe ML’ and ‘Geberit FlowFit Pipe coils ML’ (insulated and uninsulated) PERT/Al/PERT pipes. The fittings are made from PPSU or lead free silicon bronze. Operating parameters: 16.0 bar@cold water and 10.0 bar@70°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312363

Size:

16mm – 75mm.

Marking:

Geberit & size on fittings. Geberit, size, model & material on pipes.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Geberit FlowFit Fittings for use with Geberit FlowFit Pipe ML and Geberit FlowFit Pipe coils ML (insulated and uninsulated) Fittings included on the approval: FlowFit coupling 620.010.00.1 PPSU, d=16mm 620.011.00.1 PPSU, d=20mm 620.012.00.1 PPSU, d=25mm 620.013.00.1 PPSU, d=32mm 620.014.00.1 PPSU, d=40mm 620.015.00.1 PPSU, d=50mm 620.016.00.1 PPSU, d=63mm 620.017.00.1 PPSU, d=75mm FlowFit long coupling 620.020.00.1 CuZn21Si3P, d=16mm 620.021.00.1 CuZn21Si3P, d=20mm 620.022.00.1 CuZn21Si3P, d=25mm 620.023.00.1 CuZn21Si3P, d=32mm 620.024.00.1 CuZn21Si3P, d=40mm 620.025.00.1 CuZn21Si3P, d=50mm FlowFit reducer 620.031.00.1 PPSU, d=20mm, d1=16mm 620.032.00.1 PPSU, d=25mm, d1=16mm 620.042.00.1 PPSU, d=25mm, d1=20mm 620.033.00.1 PPSU, d=32mm, d1=20mm 620.043.00.1 PPSU, d=32mm, d1=25mm 620.034.00.1 PPSU, d=40mm, d1=20mm 620.044.00.1 PPSU, d=40mm, d1=25mm 620.054.00.1 PPSU, d=40mm, d1=32mm 620.035.00.1 PPSU, d=50mm, d1=32mm 620.045.00.1 PPSU, d=50mm, d1=40mm 620.036.00.1 PPSU, d=63mm, d1=40mm 620.046.00.1 PPSU, d=63mm, d1=50mm 620.037.00.1 PPSU, d=75mm, d1=40mm 620.047.00.1 PPSU, d=75mm, d1=50mm 620.057.00.1 PPSU, d=75mm, d1=63mm FlowFit bend 620.062.00.1 45°, PPSU, d=25mm 620.063.00.1 45°, PPSU, d=32mm 620.064.00.1 45°, PPSU, d=40mm 620.065.00.1 45°, PPSU, d=50mm 620.066.00.1 45°, PPSU, d=63mm 620.067.00.1 45°, PPSU, d=75mm 620.070.00.1 90°, PPSU, d=16mm 620.071.00.1 90°, PPSU, d=20mm 620.072.00.1 90°, PPSU, d=25mm 620.073.00.1 90°, PPSU, d=32mm 620.074.00.1 90°, PPSU, d=40mm 620.075.00.1 90°, PPSU, d=50mm 620.076.00.1 90°, PPSU, d=63mm 620.077.00.1 90°, PPSU, d=75mm FlowFit T-piece, equal 620.080.00.1 PPSU, d=16mm 620.081.00.1 PPSU, d=20mm 620.082.00.1 PPSU, d=25mm 620.083.00.1 PPSU, d=32mm 620.084.00.1 PPSU, d=40mm 620.085.00.1 PPSU, d=50mm 620.086.00.1 PPSU, d=63mm 620.087.00.1 PPSU, d=75mm FlowFit T-piece, reduced 620.111.00.1 PPSU, d=20mm, d1=16mm, d2=20mm 620.101.00.1 PPSU, d=20mm, d1=16mm, d2=16mm 620.121.00.1 PPSU, d=16mm, d1=20mm, d2=16mm 620.102.00.1 PPSU, d=25mm, d1=20mm, d2=20mm 620.131.00.1 PPSU, d=20mm, d1=20mm, d2=16mm 620.103.00.1 PPSU, d=32mm, d1=25mm, d2=25mm 620.104.00.1 PPSU, d=40mm, d1=20mm, d2=40mm 620.105.00.1 PPSU, d=50mm, d1=40mm, d2=40mm 620.106.00.1 PPSU, d=63mm, d1=25mm, d2=63mm 620.107.00.1 PPSU, d=75mm, d1=25mm, d2=75mm 620.112.00.1 PPSU, d=25mm, d1=16mm, d2=25mm 620.113.00.1 PPSU, d=32mm, d1=16mm, d2=32mm 620.114.00.1 PPSU, d=40mm, d1=25mm, d2=40mm 620.115.00.1 PPSU, d=50mm, d1=25mm, d2=50mm 620.116.00.1 PPSU, d=63mm, d1=32mm, d2=63mm 620.117.00.1 PPSU, d=75mm, d1=32mm, d2=75mm 620.122.00.1 PPSU, d=25mm, d1=20mm, d2=25mm 620.123.00.1 PPSU, d=32mm, d1=20mm, d2=25mm 620.124.00.1 PPSU, d=40mm, d1=32mm, d2=40mm 620.125.00.1 PPSU, d=50mm, d1=32mm, d2=50mm 620.126.00.1 PPSU, d=63mm, d1=40mm, d2=63mm 620.127.00.1 PPSU, d=75mm, d1=40mm, d2=75mm 620.132.00.1 PPSU, d=20mm, d1=25mm, d2=20mm 620.133.00.1 PPSU, d=32mm, d1=20mm, d2=32mm 620.135.00.1 PPSU, d=50mm, d1=40mm, d2=50mm 620.136.00.1 PPSU, d=63mm, d1=50mm, d2=63mm 620.137.00.1 PPSU, d=75mm, d1=50mm, d2=75mm 620.142.00.1 PPSU, d=25mm, d1=25mm, d2=20mm 620.143.00.1 PPSU, d=32mm, d1=25mm, d2=32mm 620.147.00.1 PPSU, d=75mm, d1=63mm, d2=75mm FlowFit T-piece with female thread 620.150.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=16mm 620.151.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm 620.157.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=20mm 620.152.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=25mm 620.162.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4", d1=25mm 620.153.00.1 CuSn4Zn2PS, d=32mm, Rp=1/2", d1=32mm 620.163.00.1 CuSn4Zn2PS, d=32mm, Rp=3/4", d1=32mm 620.173.00.1 CuSn4Zn2PS, d=32mm, Rp=1", d1=32mm 620.154.00.1 CuSn4Zn2PS, d=40mm, Rp=1/2", d1=40mm 620.164.00.1 CuSn4Zn2PS, d=40mm, Rp=3/4", d1=40mm 620.174.00.1 CuSn4Zn2PS, d=40mm, Rp=1", d1=40mm 620.184.00.1 CuSn4Zn2PS, d=40mm, Rp=1 1/4", d1=40mm 620.155.00.1 CuSn4Zn2PS, d=50mm, Rp=1/2", d1=50mm 620.165.00.1 CuSn4Zn2PS, d=50mm, Rp=3/4", d1=50mm 620.175.00.1 CuSn4Zn2PS, d=50mm, Rp=1", d1=50mm 620.185.00.1 CuSn4Zn2PS, d=50mm, Rp=1 1/2", d1=50mm 620.156.00.1 CuSn4Zn2PS, d=63mm, Rp=1/2", d1=63mm 620.166.00.1 CuSn4Zn2PS, d=63mm, Rp=1", d1=63mm 620.176.00.1 CuSn4Zn2PS, d=63mm, Rp=2", d1=63mm 620.177.00.1 CuSn4Zn2PS, d=75mm, Rp=1", d1=75mm FlowFit adapter to Geberit Mepla: 620.090.00.1 CuZn21Si3P, d=16mm, d1=16mm 620.091.00.1 CuZn21Si3P, d=20mm, d1=20mm 620.092.00.1 CuZn21Si3P, d=25mm, d1=26mm 620.093.00.1 CuZn21Si3P, d=32mm, d1=32mm 620.094.00.1 CuZn21Si3P, d=40mm, d1=40mm 620.095.00.1 CuZn21Si3P, d=50mm, d1=50mm 620.096.00.1 CuZn21Si3P, d=63mm, d1=63mm 620.097.00.1 CuZn21Si3P, d=75mm, d1=75mm FlowFit adapter to Geberit Mapress, with plain end 620.230.00.1 CuSn4Zn2PS, d=16mm, d1=12mm 620.240.00.1 CuSn4Zn2PS, d=16mm, d1=15mm 620.231.00.1 CuSn4Zn2PS, d=20mm, d1=15mm 620.241.00.1 CuSn4Zn2PS, d=20mm, d1=18mm 620.242.00.1 CuSn4Zn2PS, d=20mm, d1=22mm 620.232.00.1 CuSn4Zn2PS, d=25mm, d1=22mm 620.233.00.1 CuSn4Zn2PS, d=32mm, d1=28mm 620.234.00.1 CuSn4Zn2PS, d=40mm, d1=35mm 620.235.00.1 CuSn4Zn2PS, d=50mm, d1=42mm 620.236.00.1 CuSn4Zn2PS, d=63mm, d1=54mm 620.250.00.1 X5CrNiMo17-12-2, d=16mm, d1=15mm 620.251.00.1 X5CrNiMo17-12-2, d=20mm, d1=18mm 620.252.00.1 X5CrNiMo17-12-2, d=20mm, d1=22mm 620.253.00.1 X5CrNiMo17-12-2, d=25mm, d1=22mm 620.254.00.1 X5CrNiMo17-12-2, d=32mm, d1=28mm 620.255.00.1 X5CrNiMo17-12-2, d=40mm, d1=35mm 620.256.00.1 X5CrNiMo17-12-2, d=50mm, d1=42mm 620.257.00.1 X5CrNiMo17-12-2, d=63mm, d1=54mm FlowFit adapter to Geberit Mapress, with pressing socket 620.329.00.1 X5CrNiMo17-12-2, d=16mm, d1=12mm 620.332.00.1 X5CrNiMo17-12-2, d=16mm, d1=15mm 620.347.00.1 X5CrNiMo17-12-2, d=20mm, d1=15mm 620.333.00.1 X5CrNiMo17-12-2, d=20mm, d1=18mm 620.334.00.1 X5CrNiMo17-12-2, d=20mm, d1=22mm 620.335.00.1 X5CrNiMo17-12-2, d=25mm, d1=22mm 620.336.00.1 X5CrNiMo17-12-2, d=32mm, d1=28mm 620.337.00.1 X5CrNiMo17-12-2, d=40mm, d1=35mm 620.338.00.1 X5CrNiMo17-12-2, d=50mm, d1=42mm 620.339.00.1 X5CrNiMo17-12-2, d=63mm, d1=54mm FlowFit adapter with male thread 620.300.00.1 CuZn21Si3P, d=16mm, R=3/8" 620.301.00.1 CuZn21Si3P, d=20mm, R=3/8" 620.302.00.1 CuZn21Si3P, d=25mm, R=1/2" 620.303.00.1 CuZn21Si3P, d=32mm, R=1" 620.304.00.1 CuZn21Si3P, d=40mm, R=1" 620.305.00.1 CuZn21Si3P, d=50mm, R=1 1/2" 620.306.00.1 CuZn21Si3P, d=63mm, R=2" 620.307.00.1 CuZn21Si3P, d=75mm, R=2 1/2" 620.310.00.1 CuZn21Si3P, d=16mm, R=1/2" 620.311.00.1 CuZn21Si3P, d=20mm, R=1/2" 620.312.00.1 CuZn21Si3P, d=25mm, R=3/4" 620.313.00.1 CuZn21Si3P, d=32mm, R=1 1/4" 620.314.00.1 CuZn21Si3P, d=40mm, R=1 1/4" 620.315.00.1 CuZn21Si3P, d=50mm, R=2" 620.316.00.1 CuZn21Si3P, d=63mm, R=2 1/2" 620.320.00.1 CuZn21Si3P, d=16mm, R=3/4" 620.321.00.1 CuZn21Si3P, d=20mm, R=3/4" 620.322.00.1 CuZn21Si3P, d=25mm, R=1" 620.324.00.1 CuZn21Si3P, d=40mm, R=1 1/2" 619.700.00.1 X5CrNiMo17-12-2, d=20mm, R=1/2" 619.701.00.1 X5CrNiMo17-12-2, d=25mm, R=3/4" 619.702.00.1 X5CrNiMo17-12-2, d=32mm, R=1" 619.703.00.1 X5CrNiMo17-12-2, d=40mm, R=1 1/4" 619.704.00.1 X5CrNiMo17-12-2, d=50mm, R=1 1/2" 619.705.00.1 X5CrNiMo17-12-2, d=63mm, R=2" 619.706.00.1 X5CrNiMo17-12-4, d=75mm, R=2 1/2" FlowFit adapter with female thread: 620.400.00.1 CuZn21Si3P, d=16mm, Rp=3/8" 620.410.00.1 CuZn21Si3P, d=16mm, Rp=1/2" 620.420.00.1 CuZn21Si3P, d=16mm, Rp=3/4" 620.401.00.1 CuZn21Si3P, d=20mm, Rp=3/8" 620.411.00.1 CuZn21Si3P, d=20mm, Rp=1/2" 620.421.00.1 CuZn21Si3P, d=20mm, Rp=3/4" 620.402.00.1 CuZn21Si3P, d=25mm, Rp=3/4" 620.412.00.1 CuZn21Si3P, d=25mm, Rp=1" 620.403.00.1 CuZn21Si3P, d=32mm, Rp=1" 620.413.00.1 CuZn21Si3P, d=32mm, Rp=1 1/4" 620.404.00.1 CuZn21Si3P, d=40mm, Rp=1" 620.414.00.1 CuZn21Si3P, d=40mm, Rp=1 1/4" 620.424.00.1 CuZn21Si3P, d=40mm, Rp=1 1/2" 620.405.00.1 CuZn21Si3P, d=50mm, Rp=1 1/2" 620.415.00.1 CuZn21Si3P, d=50mm, Rp=2" 620.406.00.1 CuZn21Si3P, d=63mm, Rp=2" 620.416.00.1 CuZn21Si3P, d=63mm, Rp=2 1/2" 620.407.00.1 CuZn21Si3P, d=75mm, Rp=2 1/2" FlowFit bend adapter 90° with male thread 620.510.00.1 CuSn4Zn2PS, d=16mm, R=1/2" 620.520.00.1 CuSn4Zn2PS, d=16mm, R=3/4" 620.511.00.1 CuSn4Zn2PS, d=20mm, R=1/2" 620.521.00.1 CuSn4Zn2PS, d=20mm, R=3/4" 620.502.00.1 CuSn4Zn2PS, d=25mm, R=3/4" 620.512.00.1 CuSn4Zn2PS, d=25mm, R=1" 620.503.00.1 CuSn4Zn2PS, d=32mm, R=1" 620.504.00.1 CuSn4Zn2PS, d=40mm, R=1 1/4" 620.505.00.1 CuSn4Zn2PS, d=50mm, R=1 1/2" 620.506.00.1 CuSn4Zn2PS, d=63mm, R=2" FlowFit 90° bend adapter with male thread, long: 620.522.00.1 CuSn4Zn2PS, d=16mm, R=1/2" 620.523.00.1 CuSn4Zn2PS, d=16mm, R=3/4" 620.524.00.1 CuSn4Zn2PS, d=20mm, R=1/2" 620.525.00.1 CuSn4Zn2PS, d=20mm, R=3/4" 620.526.00.1 CuSn4Zn2PS, d=25mm, R=3/4" 620.527.00.1 CuSn4Zn2PS, d=25mm, R=1" 620.528.00.1 CuSn4Zn2PS, d=32mm, R=1" FlowFit bend adapter 90° with female thread 620.532.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4" 620.533.00.1 CuSn4Zn2PS, d=32mm, Rp=1" 620.534.00.1 CuSn4Zn2PS, d=40mm, Rp=1 1/4" 620.535.00.1 CuSn4Zn2PS, d=50mm, Rp=1 1/2" 620.536.00.1 CuSn4Zn2PS, d=63mm, Rp=2" 620.540.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.541.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" 620.542.00.1 CuSn4Zn2PS, d=25mm, Rp=1" 620.550.00.1 CuSn4Zn2PS, d=16mm, Rp=3/4" 620.551.00.1 CuSn4Zn2PS, d=20mm, Rp=3/4" FlowFit adapter with MasterFix 620.290.00.1 PPSU, d=16mm, RpMF=1/2" 620.291.00.1 PPSU, d=20mm, RpMF=1/2" FlowFit elbow adapter 90° with MasterFix: 620.490.00.1 PPSU, d=16mm, RpMF=1/2" 620.491.00.1 PPSU, d=20mm, RpMF=1/2" FlowFit T-piece adapter with MasterFix, through-flow 620.380.00.1 PPSU, d=16mm, RpMF=1/2", d1=16mm 620.381.00.1 PPSU, d=20mm, RpMF=1/2", d1=16mm 620.391.00.1 PPSU, d=20mm, RpMF=1/2", d1=20mm 620.382.00.1 PPSU, d=25mm, RpMF=1/2", d1=20mm 620.392.00.1 PPSU, d=25mm, RpMF=1/2", d1=25mm 620.780.00.1 PPSU, d=16mm, d1=16mm, RpMF1=1/2" 620.781.00.1 PPSU, d=20mm, d1=20mm, RpMF1=1/2" FlowFit adapter to Compact 620.560.00.1 CuZn21Si3P, d=16mm, di=21mm 620.561.00.1 CuZn21Si3P, d=20mm, di=21mm 620.562.00.1 CuZn21Si3P, d=25mm, di=21mm FlowFit screw connection 620.570.00.1 CuZn21Si3P, d=16mm 620.571.00.1 CuZn21Si3P, d=20mm 620.572.00.1 CuZn21Si3P, d=25mm 620.573.00.1 CuZn21Si3P, d=32mm 620.574.00.1 CuZn21Si3P, d=40mm 620.575.00.1 CuZn21Si3P, d=50mm 620.576.00.1 CuZn21Si3P, d=63mm FlowFit adapter union with clamping ring 620.680.00.1 CuZn21Si3P, d=16mm, d1=12mm 620.690.00.1 CuZn21Si3P, d=16mm, d1=15mm 620.681.00.1 CuZn21Si3P, d=20mm, d1=15mm FlowFit elbow adapter 90° with clamping ring union 620.700.00.1 CuSn4Zn2PS, d=16mm, d1=12mm 620.710.00.1 CuSn4Zn2PS, d=16mm, d1=15mm 620.701.00.1 CuSn4Zn2PS, d=20mm, d1=15mm 620.720.00.1 CuZn21Si3P / Cu, d=16mm, d1=15mm 620.721.00.1 CuZn21Si3P / Cu, d=20mm, d1=15mm 620.722.00.1 CuZn21Si3P / Cu, d=25mm, d1=22mm FlowFit adapter with screw connection to PEX pipes: 620.730.00.1 CuZn21Si3P, d=16mm, d1=16mm, PN=6bar 620.731.00.1 CuZn21Si3P, d=20mm, d1=20mm, PN=6bar 620.732.00.1 CuZn21Si3P, d=25mm, d1=25mm, PN=6bar FlowFit pipe end plug 620.740.00.1 CuZn21Si3P, d=16mm 620.741.00.1 CuZn21Si3P, d=20mm 620.742.00.1 CuZn21Si3P, d=25mm FlowFit tap connector box 90° with MasterFix 650.681.00.3 CC499K, d=16mm, Rp=1/2" 651.681.00.3 CC499K, d=20mm, Rp=1/2" 652.682.00.3 CC499K, d=20mm, Rp=3/4" Tap connector box 90° for MasterFix 650.687.00.3 CC499K, Rp=1/2" 650.688.00.3 CC499K, Rp=3/4" FlowFit double tap connector box 90° with MasterFix 650.683.00.3 CC499K, d=16mm, Rp=1/2", d1=16mm 652.685.00.3 CC499K, d=20mm, Rp=1/2", d1=16mm Double tap connector box 90° for MasterFix 650.689.00.3 CC499K, Rp=1/2" FlowFit tap connector box 90° with MasterFix, premounted 650.791.00.3 CC499K, d=16mm, Rp=1/2", AD=15.3cm 651.791.00.3 CC499K, d=20mm, Rp=1/2", AD=15.3cm 650.792.00.3 CC499K, Rp=1/2", RMF=1/2", AD=15.3cm FlowFit connection bend 90° 620.802.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4", L=5.2cm 620.750.00.1 CuSn4Zn2PS, d=16mm, Rp=3/8", L=3.6cm 620.751.00.1 CuSn4Zn2PS, d=20mm, Rp=3/8", L=3.6cm 620.760.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=3.6cm 620.761.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=3.6cm 620.810.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=5.2cm 620.811.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=5.2cm 620.821.00.1 CuSn4Zn2PS, d=20mm, Rp=3/4", L=5.2cm 620.770.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=7.8cm 620.771.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=7.8cm 620.800.00.1 CuSn4Zn2PS, d=16mm, Rp=3/8", L=5.2cm 620.801.00.1 CuSn4Zn2PS, d=20mm, Rp=3/8", L=5.2cm FlowFit T-elbow tap connector 90°, offset 620.951.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=3.6cm 620.981.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=5.2cm FlowFit double elbow tap connector 90°: 620.830.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=16mm, L=5.2cm 620.831.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=20mm, L=5.2cm 620.832.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=25mm, L=5.2cm 620.841.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=16mm, L=5.2cm 620.842.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=20mm, L=5.2cm 620.851.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=5.2cm 620.852.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=25mm, L=5.2cm FlowFit corner elbow connector 90° 620.881.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=3.6cm 620.921.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=5.2cm FlowFit set of connection bend 90°, double 619.620.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=4.7cm, AD=15cm 619.621.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15cm FlowFit connection bend 90°, premounted 619.630.00.1 single: CuSn4Zn2PS, d=16mm, Rp=1/2", L1=5.2cm 619.631.00.1 single: CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm FlowFit elbow tap connector 90°, premounted, double 619.640.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=5.2cm, AD=15.3cm 619.651.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm 619.641.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=10cm FlowFit PushFit tap connector box 90° pre-mounted, double 619.661.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm FlowFit elbow tap connector 90°, premounted, double 619.671.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=7.8cm, AD=15.3cm FlowFit connection bend 90°, premounted, double, with drain pipe bracket and connection bend 619.681.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm FlowFit elbow tap connector 90°, premounted, double 619.690.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=3.6cm, AD=15.3cm FlowFit elbow tap connector 90° for concealed cistern: 620.790.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.791.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" FlowFit Mepla elbow tap connector 90° for concealed cistern 620.890.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.891.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" FlowFit FloiwFit connector T-piece for concealed cistern 620.990.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.991.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" Manifold with threaded connection and connection nipple for manifold, for MasterFix 653.428.00.1 CC770S, Rp=3/4", RMF1=1/2", R1=3/4", 2 outlets 653.429.00.1 CC770S, Rp=3/4", RMF1=1/2", R1=3/4", 3 outlets Offset bend with male thread 653.478.00.1 CC499K, R=3/4" Cap with MasterFix 653.420.00.1 CW617N, RpMF=1/2" FlowFit connection nipple for manifold, for Euro cone 620.330.00.1 CuZn21Si3P, d=16mm, G=3/4" 620.331.00.1 CuZn21Si3P, d=20mm, G=3/4"

Approval Holder:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Country

United Kingdom

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

Manufacturer:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Country

United Kingdom

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

‘Polyplumb’ plastic compression and push-fit fittings for use with polyethylene pipe (Polyguard PE80 ‐PE/AL/PE‐barrier pipe to BS8588), Polyplumb barrier pipe (to BS7291) & Copper pipe (to BS EN 1057). Inserts must be used to accommodate the Polyplumb Barrier pipes. For above and below ground use. Maximum working pressure: 12.5bar. Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240202047

Size:

See models.

Marking:

Polypipe logo, size, pressure rating on cap nut (Polyguard compression fittings). Polypipe logo, size, impression No, year code of manufacture (i.e. E=2022) on cap nut (Polyguard pushfit fittings). Polypipe logo or ‘Polypipe’, size, PE/AL/PE, Polyguard, date of manufacture (Polyguard barrier pipes). Polyplumb, size, PB Barrier, date of manufacture (Polyplumb barrier pipes).

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

PGF40325 - 25mm x 3/4" Polyguard x FBSP Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PEbarrier pipe. PGF40925 - 25mm Socket End Plug - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PEbarrier pipe. PGF40932 - 32mm Socket End Plug - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PEbarrier pipe. PGF4782515 - 25mm x 15mm Copper Transition Coupling -Polyguard pushfit plastic fitting for use with Polyplumb barrier pipe and copper pipes. PGF47825 - 25mm x 22mm Copper Transition Coupling -Polyguard pushfit plastic fitting for use with Polyplumb barrier pipe and copper pipes. PGF47832 - 32mm x 28mm Copper Transition Coupling -Polyguard pushfit plastic fitting for use with Polyplumb barrier pipe and copper pipes. PGF402525 - 25mm x 25mm Transition Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PEbarrier pipe. PGF403232 - 32mm x 32mm Transition Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PEbarrier pipe. PGF40025 - 25mm Straight Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40032 - 32mm Straight Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40225 - 25mm Equal Tee - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40232 - 32mm Equal Tee - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40632 - 32mm x 25mm Reducing Coupler - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40132 - 32mm 90° Elbow - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40125 - 25mm 90° Elbow - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40332 - 32mm x 1” Poyguard x FBSP Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40425 - 25mm x 3/4" Polyguard x MBSP Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40432 - 32mm x 1" Polyguard x MBSP Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe.

Product Images

Approval Holder:

Polypipe Limited (Trading as Polypipe Building Products)

Company Name

Polypipe Limited (Trading as Polypipe Building Products)

Address

Broomhouse Lane, Edlington, Doncaster

Postcode

DN12 1ES

Country

South Yorkshire

Phone

+44 (0) 1709 770000 Fax: 01709 770001

General Email

marketing@polypipe.com

View All Listings by this Company

Manufacturer:

Polypipe Limited (Trading as Polypipe Building Products)

Company Name

Polypipe Limited (Trading as Polypipe Building Products)

Address

Broomhouse Lane, Edlington, Doncaster

Postcode

DN12 1ES

Country

South Yorkshire

Phone

+44 (0) 1709 770000 Fax: 01709 770001

General Email

marketing@polypipe.com

View All Listings by this Company

Range of AIS tin-plated brass and PPSU press fit fittings for use with WRW & 'Maincor MLC’ multi layered PE-RT/AL/PE-RT pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240202078

Size:

Please refer to model.

Marking:

Manicor Pipe: Maincor and technical information on pipe. WRW Pipe: AIS XPERT and technical information on pipe. Fittings: AIS & size on Crimping profile.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

Press fit connections: P733.4040, PPSU Press-coupling, 40mm P733.5050, PPSU Press-coupling, 50mm P733.6363, PPSU Press-coupling, 63mm P703.4040, PPSU Press-elbow 90°, 40mm P703.5050, PPSU Press-elbow 90°, 50mm P703.6363, PPSU Press-elbow 90°, 63mm P723.404040, PPSU Press-Tee, 40mm P723.505050, PPSU Press-Tee, 50mm P723.636363, PPSU Press-Tee, 63mm P703.20201, PPSU Press-elbow 90°, 20mm P703.2626, PPSU Press-elbow 90°, 26mm P723.1620161, PPSU Press-Tee, 16mm-20mm P723.2020201, PPSU Press-Tee, 20mm P723.2016161, PPSU Press-Tee, 16mm-20mm P723.2016201, PPSU Press-Tee, 16mm-20mm P723.2020161, PPSU Press-Tee, 16mm-20mm P723.262626, PPSU Press-Tee, 26mm P723.261626, PPSU Press-Tee, 16mm-26mm P723.2520201, PPSU Press-Tee, 20mm-25mm P723.2520251, PPSU Press-Tee, 20mm-25mm P723.322632, PPSU Press-Tee, 26mm-32mm P723.322626, PPSU Press-coupling, 26mm-32mm P733.12020, PPSU Press-coupling, 20mm P733.20201, PPSU Press-coupling, 20mm P733.20161, PPSU Press-coupling, 16mm-20mm P733.2625D, PPSU Press-coupling, 25mm-26mm P733.2626, PPSU Press-coupling, 26mm P733.20161, PPSU Press-coupling, 16mm-20mm P733.26201, PPSU Press-coupling, 20mm-26mm 733.3226, PPSU Press-coupling, 26mm-32mm P701.1612, PPSU male press elbow, 16mm-1/2” BSP (M) P701.2012, PPSU male press elbow, 20mm-1/2” BSP (M) P701.20121, PPSU male press elbow, 20mm-1/2” BSP (M) P701.2034, PPSU male press elbow, 20mm-3/4” BSP (M) P701.20341, PPSU male press elbow, 20mm-3/4” BSP (M) P701.2534, PPSU male press elbow, 25mm-3/4” BSP (M) P701.32100, PPSU male press elbow, 32mm-1” BSP (M) P702.1612, PPSU female press wallplate, 16mm-1/2” BSP (F) P702.2012, PPSU female press wallplate, 20mm-1/2” BSP (F) P702.20121, PPSU female press wallplate, 20mm-1/2” BSP (F) P700.1612, PPSU Female press elbow , 16mm-1/2” BSP (F) P700.2012, PPSU Female press elbow, 20mm-1/2” BSP (F) P700.20121, PPSU Female press elbow, 20mm-1/2” BSP (F) P711.1612, PPSU male press connection, 16mm-1/2” BSP (M) P711.2012, PPSU male press connection, 20mm-1/2” BSP (M) P711.2034, PPSU male press connection, 20mm-3/4” BSP (M) P711.20121, PPSU male press connection, 20mm-1/2” BSP (M) P711.2534, PPSU male press connection, 25mm-3/4” BSP (M) P711.32100, PPSU male press connection, 32mm-1” BSP (M) 1*00.1612, Press-elbow female 90º XPRT 16x2,00-1/2"H, 16mm-1/2” BSP (F) 1*00.2012, Press-elbow female 90º XPRT 20x2,25-1/2"H, 20mm-1/2” BSP (F) 1*00.20121, Press-elbow female 90º XPRT 20x2,00-1/2"H, 20mm-1/2” BSP (F) 1*00.2034, Press-elbow female 90º XPRT 20x2,25-3/4"H, 20mm-3/4” BSP (F) 1*00.20341, Press-elbow female 90º XPRT 20x2,00-3/4"H, 20mm-3/4” BSP (F) 1*00.2534, Press-elbow female 90º XPRT 25x2,50-3/4"H, 25mm-3/4” BSP (F) 1*00.2634, Press-elbow female 90º XPRT 26x3,00-3/4"H, 26mm-3/4” BSP (F) 1*00.25100, Press-elbow female 90° XPRT 25x2,5-1” H, 25mm-1” BSP (F) 1*00.32100, Press-elbow female 90º XPRT 32x3,00-1"H, 32mm-1” BSP (F) 1*01.1612, Press-elbow male 90º XPRT 16x2,00-1/2"M, 16mm-1/2” BSP (M) 1*01.1638, Press-elbow male 90º XPRT 16x2,00-3/8"M, 16mm-3/8” BSP 1*01.2012, Press-elbow male 90º XPRT 20x2,25-1/2"M, 20mm-1/2” BSP 1*01.20121, Press-elbow male 90º XPRT 20x2,00-1/2"M, 20mm-1/2” BSP 1*01.2034, Press-elbow male 90º XPRT 20x2,25-3/4"M, 20mm-3/4” BSP 1*01.20341, Press-elbow male 90º XPRT 20x2,00-3/4"M, 20-3/4” BSP 1*01.2534, Press-elbow male 90º XPRT 25x2,50-3/4"M, 25-3/4” BSP 1*01.2634, Press-elbow male 90º XPRT 26x3,00-3/4"M, 26-3/4” BSP 1*01.25100, Press-elbow male 90º XPRT 25x2,50-1"M, 25-1” BSP 1*01.32100, Press-elbow male 90º XPRT 32x3,00-1"M, 32-1” BSP 1*02.1612, Press-wallplate elbow female 90º XPRT 16x2,00-1/2"F - 46 mm height, 16-1/2” BSP (F) 1*02.2012, Press-wallplate elbow female 90º XPRT 20x2,25-1/2"F - 46 mm height, 20-1/2” BSP 1*02.20121, Press-wallplate elbow female 90º XPRT 20x2,00-1/2"F - 46 mm height, 20-1/2” BSP 1*02.2034, Press-wallplate elbow female 90º XPRT 20x2,00-3/4"F - 46 mm height, 20-3/4” BSP 1*02.2534, Press-wallplate elbow female 90º XPRT 25x2,50-3/4"F - 46 mm height, 25-3/4” BSP 1*03.1616, Press-elbow 90º XPRT 16x2,00, 16mm 1*03.2020, Press-elbow 90º XPRT 20x2,25, 20mm 1*03.20201, Press-elbow 90º XPRT 20x2,00, 20mm 1*03.2525, Press-elbow 90º XPRT 25x2,50, 25mm 1*03.2626, Press-elbow 90º XPRT 26x3,00, 26mm 1*03.3232, Press-elbow 90º XPRT 32x3,00, 32mm 1*04.3232, Press-elbow 45º XPRT 32x3,00, 32mm 1*05.1612, Double-press-tab connection elbow FT, 16x2,0-1/2-16x2,0, 16mm-1/2 BSP (F) 1*05.2012, Double-press-tab connection elbow FT,20x2,25 ½”, 20mm-1/2 BSP (F) 1*06.1612, Press-wallplate elbow female 90º XPRT 16x2,00-1/2"F - 38 mm height, 16-1/2” BSP (F) 1*06.1638, Press-wallplate elbow female 90º XPRT 16x2,00-3/8"F - 38 mm height, 16-3/8” BSP 1*06.2012, Press-wallplate elbow female 90º XPRT 20x2,25-1/2"F - 38 mm height, 20-1/2” BSP 1*06.20121, Press-wallplate elbow female 90º XPRT 20x2,00-1/2"F - 38 mm height, 20-1/2” BSP 1*07.1612, Elbow 90º with screw connection XPRT 16x2,00-1/2", 16-1/2” BSP (M) 1*07.2012, Elbow 90º with screw connection XPRT 20x2,25-1/2", 20-1/2” BSP (M) 1*07.2034, Elbow 90º with screw connection XPRT 20x2,25-3/4", 20-3/4” BSP (M) 1*07.2534, Elbow 90º with screw connection XPRT 25x2,50-3/4", 25-3/4” BSP (M) 1*08.1612, Press-UPS-connection elbow FT Geberit 16x2,0-1/2, 16mm-1/2” BSP (F) 1*10.1612, Press-connection female XPRT 16x2,00-1/2"H, 16mm-1/2” BSP (F) 1*10.1634, Press-connection female XPRT 16x2,00-3/4"H, 16-3/4” BSP 1*10.2012, Press-connection female XPRT 20x2,25-1/2"H, 20-1/2” BSP 1*10.20121, Press-connection female XPRT 20x2,00-1/2"H, 20-1/2” BSP 1*10.2034, Press-connection female XPRT 20x2,25-3/4"H, 20-3/4” BSP 1*10.20341, Press-connection female XPRT 20x2,00-3/4"H, 20-3/4” BSP 1*10.20100, Press-connection female XPRT 20x2,25-1"H, 20-1” BSP 1*10.25100, Press-connection female XPRT 25x2,50-1"H, 25-1” BSP 1*10.2534, Press-connection female XPRT 25x2,50-3/4"H, 25-3/4” BSP 1*10.26100, Press-connection female XPRT 26x3,00-1"H, 26-1” BSP 1*10.2634, Press-connection female XPRT 26x3,00-3/4"H, 26-3/4” BSP 1*10.32100, Press-connection female XPRT 32x3,00-1"H, 32-1” BSP 1*10.32114, Press-connection female XPRT 32x3,00-1 1/4"H, 32-1 1/4” BSP 1*11.1612, Press-connection male XPRT 16x2,00-1/2"M, 16-1/2” BSP (M) 1*11.1634, Press-connection male XPRT 16x2,00-3/4"M, 16-3/4” BSP 1*11.1638, Press-connection male XPRT 16x2,00-3/8"M, 16-3/8” BSP 1*11.2012, Press-connection male XPRT 20x2,25-1/2"M, 20-1/2” BSP 1*11.20121, Press-connection male XPRT 20x2,00-1/2"M, 20-1/2” BSP 1*11.2034, Press-connection male XPRT 20x2,25-3/4"M, 20-3/4” BSP 1*11.20341, Press-connection male XPRT 20x2,00-3/4"M, 20-3/4” BSP 1*11.20100, Press-connection male XPRT 20x2,25-1"M, 20-1” BSP 1*11.25100, Press-connection male XPRT 25x2,50-1"M, 25-1” BSP 1*11.2534, Press-connection male XPRT 25x2,50-3/4"M, 25-3/4” BSP 1*11.26100, Press-connection male XPRT 26x3,00-1"M, 26-1” BSP 1*11.2634, Press-connection male XPRT 26x3,00-3/4"M, 26-3/4” BSP 1*11.32100, Press-connection male XPRT 32x3,00-1"M, 32-1” BSP 1*11.32114, Press-connection male XPRT 32x3,00-1 1/4"M, 32-1 1/4” BSP 1*14.1612, Press-screw connection female XPRT 16x2,00-1/2"F, 16-1/2” BSP (F) 1*14.1634, Press-screw connection female XPRT 16x2,00-3/4"F, 16-3/4” BSP 1*14.1638, Press-screw connection female XPRT 16x2,00-3/8"F, 16-3/8” BSP 1*14.2012, Press-screw connection female XPRT 20x2,25-1/2", 20-1/2” BSP 1*14.20121, Press-screw connection female XPRT 20x2,0-1/2", 20-1/2” BSP 1*14.2034, Press-screw connection female XPRT 20x2,25-3/4", 20-3/4” BSP 1*14.20341, Press-screw connection female XPRT 20x2,00-3/4"F, 20-3/4” BSP 1*14.25100, Press-screw connection female XPRT 25x2,5-1", 25-1” BSP 1*14.2534, Press-screw connection female XPRT 25x2,5-3/4", 25-3/4” BSP 1*14.26100, Press-screw connection female XPRT 26x3,00-1"F, 26-1” BSP 1*14.2634, Press-screw connection female XPRT 26x3,00-3/4"F, 26-3/4” BSP 1*14.32100, Press-screw connection female XPRT 32x3,0-1", 32-1” BSP 1*14.32114, Press-screw connection female XPRT 32x3,0-1 1/4", 32-1 1/4” BSP 1*20.161216, Press-tee female XPRT 16x2,00-1/2"F-16x2,00, 16-1/2” BSP (F) 1*20.201220, Press-tee female XPRT 20x2,25-1/2"F-20x2,25, 20-1/2” BSP 1*20.2012201, Press-tee female XPRT 20x2,00-1/2"F-20x2,00, 20-1/2” BSP 1*20.203420, Press-tee female XPRT 20x2,25-3/4"F-20x2,25, 20-3/4” BSP 1*20.251225, Press-tee female XPRT 25x2,50-1/2"F-25x2,50, 25-1/2” BSP 1*20.253425, Press-tee female XPRT 25x2,50-3/4"F-25x2,50, 25-3/4” BSP 1*20.261226, Press-tee female XPRT 26x3,00-1/2"F-26x3,00, 26-1/2” BSP 1*20.263426, Press-tee female XPRT 26x3,00-3/4"F-26x3,00, 26-3/4” BSP 1*20.321232, Press-tee female XPRT 32x3,00-1/2"F-32x3,00, 32-1/2” BSP 1*20.323432, Press-tee female XPRT 32x3,00-3/4"F-32x3,00, 32-3/4” BSP 1*21.161216, Press tee MT 16x2,00-1/2”-16x2,00, 16-1/2” BSP (M) 1*21.253425, Press tee MT 25x2,50-3/4”-25x2,50, 25-3/4” BSP (M) 1*21.323432, Press tee MT 32x3,00-3/4”-32x3,00, 32-3/4” BSP (M) 1*23.161616, Press-T XPRT 16x2,00, 16mm 1*23.162016, Press-tee reduced XPRT 16x2,00-20x2,25-16x2,00, 16-20mm 1*23.1620161, Press-T reduced XPRT 16x2,00-20x2,00-16x2,00, 16-20mm 1*23.201616, Press-tee reduced XPRT 20x2,25-16x2,00-16x2,00, 16-20mm 1*23.2016161, Press-tee reduced XPRT 20x2,00-16x2,00-16x2,00, 16-2mm 1*23.201620, Press-T reduced XPRT 20x2,25-16x2,00-20x2,25, 16-20mm 1*23.2016201, Press-T reduced XPRT 20x2,00-16x2,00-20x2,00, 16-20mm 1*23.202016, Press-tee reduced XPRT 20x2,25-20x2,25-16x2,00, 16-20mm 1*23.2020161, Press-T reduced XPRT 20x2,00-20x2,00-16x2,00, 16-20mm 1*23.202020, Press-T XPRT 20x2,25, 20mm 1*23.2020201, Press-T XPRT 20x2,00, 20mm 1*23.2026201, Press-tee reduced XPRT 20x2,00-26x3,00-20x2,00, 20-26mm 1*23.202520, Press-tee reduced XPRT 20x2,25-25x2,50-20x2,25, 20-25mm 1*23.251616, Press-tee reduced XPRT 25x2,50-16x2,00-16x2,00, 16-25mm 1*23.251620, Press-tee reduced XPRT 25x2,50-16x2,00-20x2,25, 16-20-25mm 1*23.251625, Press-tee reduced XPRT 25x2,50-16x2,00-25x2,50, 16-25mm 1*23.252020, Press-tee reduced XPRT 25x2,50-20x2,25-20x2,25, 20-25mm 1*23.2520201, Press-tee reduced XPRT 25x2,50-20x2,00-20x2,00, 20-25mm 1*23.252025, Press-tee reduced XPRT 25x2,50-20x2,25-25x2,50, 20-25mm 1*23.2520251, Press-tee reduced XPRT 25x2,50-20x2,0-25x2,50, 20-25mm 1*23.252516, Press-tee reduced XPRT 25x2,50-25x2,5-16x2,00, 16-25mm 1*23.252520, Press-tee reduced XPRT 25x2,50-25x2,50-20x2,25, 20-25mm 1*23.2525201, Press-tee reduced XPRT 25x2,50-25x2,50-20x2,00, 20-25mm 1*23.252525, Press-T XPRT 25x2,50, 25mm 1*23.253225, Press-tee reduced XPRT 25x2,50-32x3,00-25x2,50, 25-32mm 1*23.261616, Press-tee reduced XPRT 26x3,00-16x2,00-16x2,00, 16-26mm 1*23.2616201, Press-tee reduced XPRT 26x3,00-16x2,00-20x2,00, 16-20-26mm 1*23.261626, Press-tee reduced XPRT 26x3,00-16x2,00-26x3,00, 16-26mm 1*23.2620201, Press-tee reduced XPRT 26x3,00-20x2,00-20x2,00, 20-26mm 1*23.2620261, Press-tee reduced XPRT 26x3,00-20x2,00-26x3,00, 20-26mm 1*23.2626201, Press-tee reduced XPRT 26x3,00-26x3,00-20x2,00, 20-26mm 1*23.262626, Press-T XPRT 26x3,00, 26mm 1*23.321632, Press-tee reduced XPRT 32x3,00-16x2,00-32x3,00, 16-32mm 1*23.322032, Press-tee reduced XPRT 32x3,00-20x2,25-32x3,00, 20-32mm 1*23.3220321, Press-tee reduced XPRT 32x3,00-20x2,00-32x3,00, 20-32mm 1*23.322525, Press-tee reduced XPRT 32x3,00-25x2,50-25x2,50, 25-32mm 1*23.322532, Press-tee reduced XPRT 32x3,00-25x2,50-32x3,00, 25-32mm 1*23.322626, Press-tee reduced XPRT 32x3,00-26x3,00-26x3,00, 26-32mm 1*23.322632, Press-tee reduced XPRT 32x3,00-26x3,00-32x3,00, 26-32mm 1*23.323232, Press-T XPRT 32x3,00, 32mm 1*33.1616, Press-coupling XPRT 16x2,00, 16mm 1*33.2016, Press-coupling reduced XPRT 20x2,25-16x2,00, 16-20mm 1*33.20161, Press-coupling reduced XPRT 20x2,00-16x2,00, 16-20mm 1*33.2020, Press-coupling XPRT 20x2,25, 20mm 1*33.20201, Press-coupling XPRT 20x2,00, 20mm 1*33.2516, Press-coupling reduced XPRT 25x2,50-16x2,00, 16-25mm 1*33.2520, Press-coupling reduced XPRT 25x2,50-20x2,25, 20-25mm 1*33.25201, Press-coupling reduced XPRT 25x2,50-20x2,00, 20-25mm 1*33.2525, Press-coupling XPRT 25x2,50, 25mm 1*33.2616, Press-coupling reduced XPRT 26x3,00-16x2,00, 16-26mm 1*33.26201, Press-coupling reduced XPRT 26x3,00-20x2,00, 20-26mm 1*33.2626, Press-coupling XPRT 26x3,00, 26mm 1*33.3216, Press-coupling reduced XPRT 32x3,00-16x2,00, 16-32mm 1*33.3220, Press-coupling reduced XPRT 32x3,00-20x2,25, 20-32mm 1*33.3225, Press-coupling reduced XPRT 32x3,00-25x2,50, 25-32mm 1*33.3226, Press-coupling reduced XPRT 32x3,00-26x3,00, 26-32mm 1*33.3232, Press-coupling XPRT 32x3,00, 32mm 1*52.1616, Press-adapter for PE pipes 16x2,0-PER 16x1,5 (16/13), 16mm 1*52.2020, Press-adapter for PE pipes 20x2,25-PER 20x1,9, 20mm 1*53.161215, Press radiator connection elbow 16x2,0-150 mm-Cu 12, 16-12mm 1*53.161515, Press radiator connection elbow 16x2,0-150 mm-Cu 15, 16-15mm 1*53.161535, Press radiator connection elbow 16x2,0-330 mm-Cu 15, 16-15mm 1*54.161512, Press-connection MT 16x2,0-1/2-Cu 15mm, 16-1/2” BSP (M) 1*54.1610 (B), Press-adapter for copper pipes 16x2,0-Cu 10, 16-10mm 1*54.1612 (B), Press-adapter for copper pipes 16x2,0-Cu 12, 16-12mm 1*54.1615 (B), Press-adapter for copper pipes 16x2,0-Cu 15, 16-15mm 1*54.16161 (B), Press-adapter for copper pipes 16x2,0-Cu 16, 16-16mm 1*54.2018 (B), Press-adapter for copper pipes 20x2,25-Cu 18, 20-18mm 1*54.2022 (B), Press-adapter for copper pipes 20x2,25-Cu 22, 20-22mm 1*54.2522 (B), Press-adapter for copper pipes 25x2,5-Cu 22, 25-22mm 1*54.2528 (B), Press-adapter for copper pipes 25x2,5-Cu 28, 25-28mm 1*54.3228 (B), Press-adapter for copper pipes 32x3,0-Cu 28, 32-28mm 1*54.2022118, Press-connection MT 20x2,25-1 1/8-Cu 22mm, 20-1 1/8mm 1*54.2522118, Press-connection MT 25x2,5-1 1/8-Cu 22mm, 25-1 1/8mm 1*55.16, Press-plug 16x2,0, 16mm 1*55.20, Press-plug 20x2,25, 20mm 1*56.161512, Press-elbow 90° MT 16x2,0-1/2-Cu 15mm, 16-1/2mm 1*63.161535, Press radiator connection elbow 16x2,0-330 mm-Cu 15, 16-15mm 1*63.201535, Press radiator connection elbow 20x2,25-330 mm-Cu 15, 20-15mm 1*75.16, Press-tab connection for wall 16x2,0-1/2, 16-1/2” BSP 1*76.16, Press-UPS-connection elbow 16x2,0-1/2, 16-1/2” BSP 1*81.16, Press-UPS-connection elbow - Multifix 16x2,0-1/2, 16-1/2” BSP 1*81.16L, Press-UPS-connection elbow – Multifix 16x2,0-1/2, 16-1/2” BSP 1*81.20, Press-UPS-connection elbow - Multifix 20x2,25-1/2, 20-1/2” BSP (*) 7 or 9, where 7 is for tin plated fittings, and 9 for non tin plated fittings 703.4040*, Press-elbow 90° XPRT 40x4,00-40x4,00, 40mm 704.4040*, Press-elbow 45° XPRT 40x4,00-40x4,00, 40mm 710.40112*, Press-connection female XPRT 40x4,00-1 1/2"F, 40-1 1/2” BSP 710.40114*, Press-connection female XPRT 40x4,00-1 1/4"F, 40-1 1/4” BSP 711.40112*, Press-connection male XPRT 40x4,00-1-1/2"M, 40-1 1/2” BSP 711.40114*, Press-connection male XPRT 40x4,00-1-1/4"M, 40-1 1/4” BSP 714.40112*, Press-screw connection female XPRT 40x4,00-1 1/2"F, 40-1 1/2” BSP 714.40114*, Press-screw connection female XPRT 40x4,00-1 1/4"F, 40-1 1/4” BSP 720.4010040*, Press-T female XPRT 40x4,00-1"F-40x4,00, 40-1” 723.402040*, Press-T reduced XPRT 40x4,00-20x2,25-40x4,00, 20-40mm 723.4020401*, Press-T reduced XPRT 40x4,00-20x2,00-40x4,00, 20-40mm 723.402540*, Press-T reduced XPRT 40x4,00-25x2,50-40x4,00, 25-40mm 723.402640*, Press-T reduced XPRT 40x4,00-26x3,00-40x4,00, 26-40mm 723.403232*, Press-T reduced XPRT 40x4,00 - 32x3,00 - 32x3,00, 32-40mm 723.403240*, Press-T reduced XPRT 40x4,00-32x3,00-40x4,00, 32-40mm 723.404040*, Press-T XPRT 40x4,00-40x4,00-40x4,00, 40mm 733.4025*, Press-coupling reduced XPRT 40x4,00-25x2,50, 25-40mm 733.4026*, Press-coupling reduced XPRT 40x4,00-26x2,50, 26-40mm 733.4032*, Press-coupling reduced XPRT 40x4,00-32x3,00, 32-40mm 733.4040*, Press-coupling XPRT 40x4,00-40x4,00, 40mm 703.5050*, Press-elbow 90° XPRT 50x4,50-50x4,50, 50mm 704.5050*, Press-elbow 45° XPRT 50x4,50-50x4,50, 50mm 710.50112*, Press-connection female XPRT 50x4,50-1 1/2"F, 50-1 1/2” BSP 711.50112*, Press-connection male XPRT 50x4,50-1-1/2"M, 50-1 1/2” BSP 711.50200*, Press-connection male XPRT 50x4,50-2"M, 50-2” BSP 714.50200*, Press-screw connection female XPRT 50x4,50-2"F, 50-2” BSP 720.5010050*, Press-T female XPRT 50x4,50-1"F-50x4,50, 50-1” BSP 723.502550*, Press-T reduced XPRT 50x4,50-25x2,50-50x4,50, 25-50mm 723.502650*, Press-T reduced XPRT 50x4,50-26x3,00-50x4,50, 26-50mm 723.503250*, Press-T reduced XPRT 50x4,50-32x3,00-50x4,50, 32-50mm 723.504050*, Press-T reduced XPRT 50x4,50-40x4,00-50x4,50, 40-50mm 723.505050*, Press-T XPRT 50x4,50-50x4,50-50x4,50, 50mm 733.5032*, Press-coupling reduced XPRT 50x4,50-32x3,00, 32-50mm 733.5040*, Press-coupling reduced XPRT 50x4,50-40x4,00, 40-50mm 733.5050*, Press-coupling XPRT 50x4,50-50x4,50, 50mm 703.6363*, Press-elbow 90° XPRT 63x6,00-63x6,00, 63mm 704.6363*, Press-elbow 45° XPRT 63x6,00-63x6,00, 63mm 710.63200*, Press-connection female XPRT 63x6,00-2"F, 63-2” BSP 711.63200*, Press-connection male XPRT 63x6,00-2"M, 63-2” BSP 714.63200*, Press-screw connection female XPRT 63x6,00-2"F, 63-2” BSP (F) 720.6310063*, Press-T female XPRT 63x6,00-1"F-63x6,00, 63-1” BSP 723.632563*, Press-T reduced XPRT 63x6,00-25x2,50-63x6,00, 25-63mm 723.632663*, Press-T reduced XPRT 63x6,00-26x2,50-63x6,00, 26-63mm 723.633263*, Press-T reduced XPRT 63x6,00-32x3,00-63x6,00, 32-63mm 723.634063*, Press-T reduced XPRT 63x6,00-40x4,00-63x6,00, 40-63mm 723.635063*, Press-T reduced XPRT 63x6,00-50x4,50-63x6,00, 50-63mm 723.636363*, Press-T XPRT 63x6,00-63x6,00-63x6,00, 63mm 733.6340*, Press-coupling reduced XPRT 63x6,00-40x4,00, 40-63mm 733.6350*, Press-coupling reduced XPRT 63x6,00-50x4,50, 50-63mm 733.6363*, Press-coupling XPRT 63x6,00-63x6,00, 63mm (*) ending in F or w/o F, where w/o F is for tin plated fittings, and ending in F for non tin plated fittings All the above fittings can be used with the following pipe sizes: , , Supplier: WRW, 101.16025, AIS MLP PERT/ Al/PERT 16x2-coil, no box- Supplier: WRW, 101.16XXX XXX=length of coil, AIS MLP PERT/ Al/PERT 16x2- coil, box- Supplier: WRW, 101.20100, AIS MLP PERT/ Al/PERT 20x2,25 - coil, box- Supplier: WRW, 101.20101, AIS MLP PERT/ Al/PERT 20x2- coil, box- Supplier: WRW, 101.25050, AIS MLP PERT/ Al/PERT 25x2,5- coil, box- Supplier: WRW, 101.26050, AIS MLP PERT/ Al/PERT 26x3- coil, box- Supplier: WRW, 101.32050, AIS MLP PERT/ Al/PERT 32x3- coil, box- Supplier: WRW, 102.16004, AIS MLP PERT/ Al/PERT 16x2 -bar- Supplier: WRW, 102.20004, AIS MLP PERT/ Al/PERT 20x2,25-bar- Supplier: WRW, 102.20104, AIS MLP PERT/ Al/PERT 20x2-bar- Supplier: WRW, 102.25004, AIS MLP PERT/ Al/PERT 25x2,5-bar- Supplier: WRW, 102.26004, AIS MLP PERT/ Al/PERT 26x3-bar- Supplier: WRW, 102.32004, AIS MLP PERT/ Al/PERT 32x3-bar- Supplier: WRW, 102.40004, AIS MLP PERT/ Al/PERT 40x4-bar- Supplier: WRW, 102.50004, AIS MLP PERT/ Al/PERT 50x4,5-bar- Supplier: WRW, 102.63004, AIS MLP PERT/ Al/PERT 63x6-bar- Supplier: WRW, 104.16100, AIS MLP PERT/ Al/PERT 16x2 -coil, no box- Supplier: WRW, 104.20100, AIS MLP PERT/ Al/PERT 16x2-coil, no box- Supplier: WRW, 104.20101, AIS MLP PERT/ Al/PERT 20x2-coil, no box- Supplier: WRW, 104.25050, AIS MLP PERT/ Al/PERT 25x2,5-coil, no box- Supplier: WRW, 104.26050, AIS MLP PERT/ Al/PERT 26x3-coil, no box- Supplier : Maincor, 816001400x x=3 or 5 (m), AIS MLP PERT/ Al/PERT , in bars: d=16x2mm 8160014xxx xxx= length of coil , AIS MLP PERT/ Al/PERT , in coils: d=16x2mm , 020061400x x=3 or 5 (m), MLP, in bars: d=20x2mm , 0200614xxx xxx= length of coil, MLP, in coils: d=20x2mm , 820001400x x=3 or 5 (m), MLP, in bars: d=20x2,25mm , 8200014xxx xxx= length of coil, MLP, in coils: d=20x2,25mm , 825001400x x=3 or 5 (m), MLP, in bars: d=25x2,5mm , 8250014xxx xxx= length of coil, MLP, in coils: d=25x2,5mm , 826001400x x=3 or 5 (m), MLP, in bars: d=26x3mm , 8260014xxx xxx= length of coil, MLP, in bars: d=26x3mm , 832001400x x=3 or 5 (m), MLP, in bars: d=32x3mm , 8320014050 only 50m coil available, MLP, in coils: d=32x3mm , 8400014005, MLP, in bars: d=40x4mm , 10150451, MLP, in bars: d=50x4,5mm , 10160601, MLP, in bars: d=63x6mm Models added April 2024: 723.324032*, Press-T reduced XPRT 32x3,00-40x4,00-32x3,00, 32-40mm 723.402532*, Press-T reduced XPRT 40x4,00-25x2,50-32x3,00, 25-40mm 723.405040*, Press-T reduced XPRT 40x4,00-50x4,50-40x4,00, 40-50mm 723.502540*, Press-T reduced XPRT 50x4,50-25x2,50-40x4,00, 25-50mm 723.506350*, Press-T reduced XPRT 50x4,50-63x6,00-50x4,50, 50-63mm (*) ending in F or w/o F, where w/o F is for tin plated fittings, and ending in F for non tin plated fittings Models added May 2024; P703.1616, PPSU Press-elbow 90° P703.2020, PPSU Press-elbow 90° P703.2525, PPSU Press-elbow 90° P703.3232, PPSU Press-elbow 90° P723.161616, PPSU Press-Tee P723.162016, PPSU Press-Tee P723.202020, PPSU Press-Tee P723.201616, PPSU Press-Tee P723.201620, PPSU Press-Tee P723.202016, PPSU Press-Tee P723.252525, PPSU Press-Tee P723.251625, PPSU Press-Tee P723.252020, PPSU Press-Tee P723.252025, PPSU Press-Tee P723.323232, PPSU Press-Tee P723.322032, PPSU Press-Tee P723.322532, PPSU Press-Tee P723.322525, PPSU Press-Tee P733.1616, PPSU Press-coupling P733.2020, PPSU Press-coupling P733.2016, PPSU Press-coupling P733.2525, PPSU Press-coupling P733.2516, PPSU Press-coupling P733.2520, PPSU Press-coupling P733.3232, PPSU Press-coupling P733.3225, PPSU Press-coupling P701.2634, PPSU male press elbow P711.20341, PPSU male press connection P711.2634, PPSU male press connection P723.2620201, PPSU Press-Tee P723.2620261, PPSU Press-Tee P723.3220321, PPSU Press-Tee P733.25201, PPSU Press-coupling P733.2616, PPSU Press-coupling

Product Images

Approval Holder:

MULTICAPAS INDUSTRIAL SLU

Company Name

MULTICAPAS INDUSTRIAL SLU

Address

C/INDUSTRIAS 4, OF. 10-11 ALCORCÓN MADRID

Postcode

28923

Country

Spain

General Email

emendez@aisoutnovation.com

View All Listings by this Company