Combination Tap Assemblies

Section Code 0681 : Miscellaneous.

Back To Directory Sections

#250302006

Range of wall mounted, concealed thermostatic basin mixing valves with brass bodies. Temperature is controlled via a thermostatic cartridge and flow is controlled by solenoid valves actuated by an infrared sensor. The outlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
250302006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2" BSP (M) inlet X outlet 1/2" BSP (F) inlet X outlet
Marking:
Dornbracht logo on valve housing cover
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2030
Model:
3574097090 -Touchfree Basin mixer with temperature setting for combining with free-standing fittings 3574197090 – Touchfree Basin mixer with temperature setting for combining with wall-mounted fittings 4276597090 - eSET Touchfree Basin mixer with temperature setting - required for installation with 3574097090 and 3574197090

Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#250504016

Range of bath filler waste kits incorporating a brass inlet elbow and overflow assembly, a copper hex nut, overflow housing. Maximum Working Pressure 5.0 bar. Maximum operating temperature 70.0 C

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
250504016
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
ST James Laser etched on the front of the bath filler
Installation Requirements:
R001 R040 R576
Expiry date:
31/05/2030
Model:
WS.307.XX 1 Click – Clack Bath filler waste WS is the range, 307 is the range model type, .XX at the end denotes the finish Finish codes are - 01 = Chrome, 02 = Matt Black, 03 = Brushed Brass, 04 = Brushed Nickel, 05 = Brushed Bronze, 06 = Gunmetal, 07 = Polished Nickel, 08 = Stainless Steel

Approval Holder:
Sanbra Limited T/A St James England
Company Name
Sanbra Limited T/A St James England
Address
17 Flitch Industrial Estate Chelmsford Raod Dunmow
Postcode
CM6 1XJ
Country
GB
Phone
01213588946
General Email
wayne.berrow@StJamesEngland.com

View All Listings by this Company

Print This Approval


#250612006

Control valve (chromium plated brass) incorporating a ceramic disc headwork with a dome operating member. Maximum working pressure 10.0 Bar Maximum operating temperature 85 °C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
250612006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
NOURK on body
Installation Requirements:
R001
Expiry date:
30/06/2030
Model:
NKAV-01-CR

Approval Holder:
ST STYLE LLC
Company Name
ST STYLE LLC
Address
SHOWROOM 18-19, JAMAL & KHALID BAGLAF BUILDING, KINGFAISAL ROAD, INDUSTRIAL AREA 4, SHARJAH
Country
United Arab Emirates

View All Listings by this Company

Print This Approval


#251002003

ALT Series of wall mounted anti-ligature outlets, intended to be installed within a suitable basin (not included as part of this approval) Model ALT-81 has a single inlet & outlet and model ALT-80 has two inlets & outlets. The flow is controlled via a touch operated solenoid valve and the internal connecting pipework is pushfit. The products are for use with copper pipe (manufactured to EN 1057) and are supplied with a plastic aerator and flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
251002003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
R008 applies to the solenoid valve. The products are intended to be installed with an elbow fitting between the solenoid valve and copper pipe and this isn’t supplied by the approval holder.
Size:
15mm compression
Marking:
Wallgate on top of tap casing.
Installation Requirements:
R001 R008 R010 R040
Expiry date:
31/10/2030
Model:
ALT-80 & ALT-81.

Approval Holder:
Wallgate Ltd.
Company Name
Wallgate Ltd.
Address
Crow Lane, Salisbury
Postcode
SP2 0HB
Country
United Kingdom
Phone
01722 702058
General Email
jmarshall@wallgate.com

View All Listings by this Company
Manufacturer:
Wallgate Ltd.
Company Name
Wallgate Ltd.
Address
Crow Lane, Salisbury
Postcode
SP2 0HB
Country
United Kingdom
Phone
01722 702058
General Email
jmarshall@wallgate.com

View All Listings by this Company

Print This Approval


#251002004

WHB, WHBV & ALS series of wall mounted, anti-ligature wash hand basins and tap outlets. The flow is controlled via a solenoid valve and the internal connecting pipework is pushfit. The WHB and ALS series can have one or two inlets, one or two outlets and the basin can have one or two piezo activated buttons. The WHBV series has two inlets, two outlets and the basin has two piezo activated buttons. The products are for use with copper pipe (manufactured to EN 1057) and are supplied with a plastic aerator and flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
251002004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
R006 applies only when the plastic aerator/ flow straightener is fitted. R008 applies to the solenoid valve. The products are intended to be installed with an elbow fitting between the solenoid valve and copper pipe and this isn’t supplied by the approval holder.
Size:
15mm compression
Marking:
Wallgate on top of tap casing.
Installation Requirements:
R001 R006 R008 R010
Expiry date:
31/10/2030
Model:
ALS Series Basin Range: ALS-180 (Pushfit) ALS-180-IR (Pushfit) ALS-181 (Pushfit) ALS-181-IR (Pushfit) WHB Series Basin Range: WHB-200 (Pushfit) WHB-200-IR (Pushfit) WHB-201 (Pushfit) WHB-201-IR (Pushfit) WHBV Series Basin Range: WHBV-101W-LH (Pushfit) WHBV-101W-RH (Pushfit) WHBV-101W-LH-IR (Pushfit) WHBV-101W-RH-IR (Pushfit)

Approval Holder:
Wallgate Ltd.
Company Name
Wallgate Ltd.
Address
Crow Lane, Salisbury
Postcode
SP2 0HB
Country
United Kingdom
Phone
01722 702058
General Email
jmarshall@wallgate.com

View All Listings by this Company
Manufacturer:
Wallgate Ltd.
Company Name
Wallgate Ltd.
Address
Crow Lane, Salisbury
Postcode
SP2 0HB
Country
United Kingdom
Phone
01722 702058
General Email
jmarshall@wallgate.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 14 of 15

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.