'Brushbond FLXIII'. Site applied, grey coloured, two-part elastomeric/cementitious coating. Mix and apply in accordance with manufacturer's instructions 'v10' dated October 2020. Cure coat 1 for 18 hours@7°C. Cure coat 2 for 21 days@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2105510

Expiry date:

31/05/2026

Approval Holder:

Fosroc International

Company Name

Fosroc International

Address

Drayton Manor Business Park, Coleshill Road, Tamworth, Staffs.

Postcode

B78 3XN

View All Listings by this Company

'Acrylatik'. Site applied, Acrylate primers available in white, red, blue and black colours. Apply as per manufacturer's instructions 'Appendix No. 1, TU 2316-002-92 872914-2016' dated '11.02.2016'. Cure for 20 minutes@20°C and then 20 minutes@90°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2104548

Expiry date:

30/04/2026

Approval Holder:

LLC 'ShLKZ' Paints Belogorya

Company Name

LLC 'ShLKZ' Paints Belogorya

Address

309295, Belgorod Region, Shebekino, st. Rzhevskoe shosse,16, Floor 1, Office 02

Country

Russian Federation

View All Listings by this Company

'Superfast Potable Water (SFPW)'. Site applied, grey coloured (once mixed), two-component epoxy putty. Mix Part A (white coloured putty) with Part B (cream coloured putty) in a 1:1 mass ratio and apply as per manufacturer's instructions 'SOP Number RM1 version 1.0', dated '06/10/2022'. Cure for 24 hours@20°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5070 Epoxy Compound

Expiry date:

31/03/2026

Approval Holder:

Sylmasta Ltd.

Company Name

Sylmasta Ltd.

Address

Halland House, Dales Yard, Lewes Road, Scaynes Hill

Postcode

RH17 7PG

Phone

+44 1444 831 459

View All Listings by this Company

'LA-CO Regular Flux'. Cream coloured flux for use with water up to 85°C.

Section:

5090 Fluxes

Expiry date:

30/06/2026

Approval Holder:

Brian Hyde Ltd

Company Name

Brian Hyde Ltd

Address

Stirling Road Shirley Solihull

Postcode

B90 4LZ

Country

West Midlands

Phone

0121 704 2324 Telex: 928717

View All Listings by this Company

'GRAD-GRP Water Tank Panel'. Cream coloured (opaque), compression moulded GRP panel. For use with water up to 23°C.

Section:

5120 Glass Reinforced Plastics (GRP)

Section Subtitle:

Components.

WRAS Approval Number:

2104537

Expiry date:

30/04/2026

Approval Holder:

Shandong Grad Group Co., Ltd.

Company Name

Shandong Grad Group Co., Ltd.

Address

No. 6, Grad Road, Tianqu Industrial Park, Dezhou City， Shandong

Country

China

View All Listings by this Company