Directory Search Results

Print List

#250455002

'SIL70 Red 'O' rings'. Red coloured, injection moulded silicone rubber 'O' rings. Shore hardness 70. Tested in-radius size 1.35mm. For use with water up to 85°C.

Section:
5410 Rubbers
Section Subtitle:
Silicone - components.
WRAS Approval Number:
250455002
Expiry date:
30/04/2030

Approval Holder:
Superior Seals Ltd.
Company Name
Superior Seals Ltd.
Address
Nimrod Way, Ferndown Industrial Estate, Ferndown, Dorset
Postcode
BH21 7SH
Country
UK
Phone
01202 854 300
General Email
sales@superiorltd.com

View All Listings by this Company

Print This Approval


#240955041

'Kefren PVC Cement'. Clear (transparent) solvent cement intended to join PVC pipe and fittings. Apply as per manufacturers technical data sheet. Cure for 48 hours@23°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5560 Solvent Cements
Expiry date:
30/09/2029

Approval Holder:
Adhesivos Kefren, S.A.
Company Name
Adhesivos Kefren, S.A.
Address
Pol. Industrial Las Atalayas, Calle Dolar, Parcela 148, 03114 Alicante
Country
Spain

View All Listings by this Company

Print This Approval


#241055020

'GEBSOPLAST® MAX'. White coloured (opaque) solvent cement. Apply as per manufacturer's TDS and cure for 24 hours@20°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5560 Solvent Cements
Expiry date:
31/10/2029

Approval Holder:
GEB SAS
Company Name
GEB SAS
Address
1 allée des coquelicots, 60440 NANTEUIL LE HAUDOUIN
Country
France
Phone
+33 (0)3 44883703

View All Listings by this Company

Print This Approval


#241004027

Range of single-hole, multiple outlet, swivel, combination tap assemblies (brass bodies - various finishes) a quarter turn ceramic disc controlling the flow to the swivel arm with a dome type operating member and a ceramic cartridge with a single lever controlling the flow to the pull-out spray outlet incorporating a plastic aerator. The spray outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature for boiling water pathway 98°C, for mixed water pathway 65C and purified water pathway 85°C

Section:
0683 Combination Tap Assemblies
Section Subtitle:
Multiple Function tap(s). In addition to normal tap function includes at least one of following functions chilled, filtered, carbonated, instantaneous hot water.
WRAS Approval Number:
241004027
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
IRN R170 only applies to the pure water outlet on the swivel arm.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections
Marking:
NLB on body.
Installation Requirements:
R001 R006 R009 R010 R090 R170
Expiry date:
31/10/2029
Model:
14013** & 13012D** ** represent different finishes No suffix: Chrome plated H: Black N: Nickel brushed GJS: Zirconium gold brushed G: Zirconium gold QTSL: Brushed bronze bright QTS: Brushed bronze matte TJ: Titanium gold TJLS: Titanium gold brushed MGJ: Rose gold MGJL: Rose gold brushed HGT: Red bronze HTL: Yellow bronze brushed HTS: Red bronze brushed PVDQH: Gun grey HQ: Gun grey brushed Q: Bronze DYB: Matte white STS: Acid copper brushed BZ: Spray pearl white DMGJ: Light rose gold brushed
Product Images

Manufacturer:
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Company Name
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Address
JIAOXI INDUSTRIAL ZONE, QINGGANG, YUHUAN, TAIZHOU
Country
China

View All Listings by this Company

Print This Approval


#241002038

Range of single hole, single outlet (fixed) electronically controlled tap assemblies. Incorporating a solenoid valve activated via an infra-red sensor. The inlets to the control box incorporate stainless steel strainers and the outlet incorporates a plastic aerator. Maximum working pressure: 8 Bar Maximum operating temperature: 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
241002038
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
10mm Spigot x 1/2" BSP (F) adaptor connected to a ½” BSP (M) x ½” BSP (M) solenoid connected to stainless steel braided, PEX lined flexible hose assembly with a ½” BSP (F) captive nut
Marking:
Stern Logo on tap cover
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2029
Model:
225610: Touch free B AB1953 & 225710: Touch free E AB1953
Product Images

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1192 of 1567

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.