Concealed, floor mounted basic set with DZR brass body. For use with floor standing combination tap assemblies. Maximum operating pressure 10 bar. Maximum operating temperature 70°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

240704008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F)

Marking:

Hansgrohe & DR

Installation Requirements:

R001 R010

Expiry date:

31/07/2029

Model:

10452180

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Peripheral pump for mains water applications with a brass body and impeller, . The pushfit connections on the hoses are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 6.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240404711

Size:

Pump body: ¾” BSP (M). Inlet and outlet hoses: 15mm pushfit.

Marking:

Mains boost, manufacturer’s address, www.stuart-turner.co.uk and other technical information printed on body. Two adhesive labels on body, one with serial no., the other includes the part no. and other technical information.

Installation Requirements:

R001 R007 R009

Expiry date:

30/04/2029

Model:

47708 STORMBOOST, 44995 STORMBOOST.

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

‘Monsoon Standard’ range of single and twin ended shower booster pumps with brass bodies, brass impellers, EPDM seals and NBR ‘O’-rings. The inlet(s) of the pump body incorporate(s) a plastic strainer. Models with push fit connections include an integral isolation valve. Pushfit connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240504702

Note:

R007 & R009 applies to the 21mm & 22mm pushfit inlet/outlet hoses.

Size:

44428 - Monsoon S1.5 bar Twin EXIP model: ¾” BSP (M) (inlet/outlet). ROI suffix models: Stainless steel braided EPDM lined flexible hose assemblies incorporating 21mm push-fit end connections (inlet/outlet). EXP suffix models: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ¾” captive nut end connections (inlet/outlet). All other models: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating 22mm push-fit end connections (inlet/outlet).

Marking:

Stuart Turner, model no., serial no, part no., pressure rating, Monsoon, manufacturer’s address and other technical information on adhesive label on body.

Installation Requirements:

R001 R007 R009 R415

Expiry date:

31/05/2029

Model:

46420: Monsoon S4.5 bar Single, 46419: Monsoon S3.0 bar Single, 46418: Monsoon S4.5 bar Twin, 46417: Monsoon S4.0 bar Twin, 46416: Monsoon S3.0 bar Twin, 46415: Monsoon S2.0 bar Twin, 46506: Monsoon S1.5 bar Twin, 44754: Monsoon S1.5 bar Twin, 46497: Monsoon S2.0 bar Single, 44424: Monsoon S1.5 bar Twin, 44423: Monsoon S2.0 bar Twin, 44422: Monsoon S2.0 bar Single, 44428: Monsoon S1.5 bar Twin EXIP, 46420ROI: Monsoon S4.5 bar Single, 46419ROI: Monsoon S3.0 bar Single, 46418ROI: Monsoon S4.5 bar Twin, 46417ROI: Monsoon S4.0 bar Twin, 46416ROI: Monsoon S3.0 bar Twin, 46415ROI: Monsoon S2.0 bar Twin, 46506ROI: Monsoon S1.5 bar Twin, 46497ROI: Monsoon S2.0 bar Single, 46420EXP: Monsoon S4.5 bar Single, 46419EXP: Monsoon S3.0 bar Single, 46418EXP: Monsoon S4.5 bar Twin, 46417EXP: Monsoon S4.0 bar Twin, 46416EXP: Monsoon S3.0 bar Twin, 46415EXP: Monsoon S2.0 bar Twin, 46506EXP: Monsoon S1.5 bar Twin, 46497EXP: Monsoon S2.0 bar Single.

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Manufacturer:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of horizontal or vertical multi-stage pumps with a stainless-steel body (HM models) or cast iron body with blue coloured cationic resin coating (VM models), incorporating either plastic or stainless-steel impellers (see model), stainless steel sleeve, EPDM gaskets and seals. Maximum working pressure 10.0 bar / 16.0 bar (see models). Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240206701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

HM models: 1” - 2” BSP (F) VM models: 1¼” - 1½” BSP (F).

Marking:

Lowara or Goulds Water Technology (both brands of Xylem), manufacturer and address, model number, serial number, maximum working pressure and technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

28/02/2029

Model:

1HM, 3HM, 5HM, 10HM, 15HM & 22HM. 1VM, 3VM, 5VM & 10VM. Model nomenclature: W XXX YY Z EM Where: W - flow rate (m3/h), either 1, 3, 5, 10, 15, or 22. XXX - Model type: Horizontal (HM) or Vertical (VM) mode, where last (optional) digit can denote the variable speed drive as follows: Null = standard asynchronous motor, H = equipped with Hydrovar, X = other drives, E = e-SM. YY - Number of impellers/stages HM models: 2-25 stages only (02-25), VM models: 2-8 stages only (02-08). Z - Material, where: (P) is plastic impeller and SS AISI 304 body (HM & VM models), (S) is SS AISI 304 impeller and body (HM models only), (N) is SS AISI 316 impeller and body (HM models only). E = 5 - 6 digits for electrical specification. M = 3 digits, where: 1st digit: Mech. rotary seal - V = Aluminium oxide (Ceramic), or Mech. rotary seal - Q = Silicon carbide (Ceramic). 2nd digit: Mech. stationary seal - B = Carbon resin impregnated. 3rd digit: Mech. seal elastomers - E = EPDM. Example code: 1HM03P05M5HVBE. Max Working Pressure for VM models → 10 bar. Max Working Pressure for HM models with stainless steel impellers and QBE Mechanical Seal → 16 bar (Depending on number of stages - see below), Max Working Pressure for HM models with plastic impellers and/or VBE Mechanical Seal → 10 bar (Depending on number of stages - see below). 1HM (P)/(S)/(N) 1-16 stages - 10.0 bar, 1HM (S)/(N) 18-25 stages - 16.0 bar. 3HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 3HM (S)/(N) 14-21 stages - 16.0 bar. 5HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 5HM (S)/(N) 14-21 stages - 16.0 bar. 10HM (P)/(S)/(N) 1-8 stages - 10.0 bar, 10HM (S)/(N) 9-13 stages - 16.0 bar. 15HM (S)/(N) 2-7 stages - 10.0 bar, 22HM (S)/(N) 2-5 stages - 10.0 bar.

Approval Holder:

Xylem Service Italia S.r.l

Company Name

Xylem Service Italia S.r.l

Address

Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza

Country

Italy

Phone

0039 0444 707111

View All Listings by this Company

Manufacturer:

Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.

Company Name

Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.

Address

View All Listings by this Company

Range of single or twin shower pumps with brass bodies, brass impeller supplied with flexible connection hoses that incorporate servicing valves. Maximum Working pressure 6 Bar Maximum operating temperature 65°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240704724

Size:

ROI suffix models: Stainless steel braided EPDM lined flexible hose assemblies incorporating 21mm push-fit end connections (inlet/outlet). EXP suffix models: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ¾” captive nut end connections (inlet/outlet). OEM 44741: Monsoon U4.5 bar Single: ¾” BSP (M) (inlet/outlet) (No hose provided). All other models: Stainless steel braided EPDM lined flexible hose assemblies incorporating 22mm push-fit end connections (inlet/outlet).

Marking:

Adhesive label on body stating Stuart Turner, model no, serial no, part no, pressure rating, Monsoon, Manufacturer address and other technical information Expansion vessel labelled with volume and pressure rating

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

46505: Monsoon U1.5 bar Twin, 46498: Monsoon U2.0 bar Single, 46480: Monsoon U2.0 bar Twin, 46414: Monsoon U4.5 bar Single, 46413: Monsoon U3.0 bar Single, 46412: Monsoon U4.5 bar Twin, 46411: Monsoon U4.0 bar Twin, 46410: Monsoon U3.0 bar Twin, OEM 44741: Monsoon U4.5 bar Single, 44427: Monsoon U3.0 bar Twin, 44426: Monsoon U2.0 bar Twin, 44425: Monsoon U2.0 bar Single, OEM 44340: Monsoon U2.0 bar Twin, 44753: Monsoon U1.5 bar Twin, 46505ROI: Monsoon U1.5 bar Twin, 46498ROI: Monsoon U2.0 bar Single, 46480ROI: Monsoon U2.0 bar Twin, 46414ROI: Monsoon U4.5 bar Single, 46413ROI: Monsoon U3.0 bar Single, 46412ROI: Monsoon U4.5 bar Twin, 46411ROI: Monsoon U4.0 bar Twin, 46410ROI: Monsoon U3.0 bar Twin, 46505EXP: Monsoon U1.5 bar Twin, 46498EXP: Monsoon U2.0 bar Single, 46480EXP: Monsoon U2.0 bar Twin, 46414EXP: Monsoon U4.5 bar Single, 46413EXP: Monsoon U3.0 bar Single, 46412EXP: Monsoon U4.5 bar Twin, 46411EXP: Monsoon U4.0 bar Twin, 46410EXP: Monsoon U3.0 bar Twin.

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company