Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2212572

'PCBIT III HIGHBUILD'. Factory applied, black coloured bituminous coating. Apply as per manufacturer's instructions for use, reference 'PCC/ PC 820' dated 27.11.2023. Cure for 5 minutes@30°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 2212572
Expiry date:: 31/12/2027

Approval Holder:: PC Chanda & Co. PVT Ltd.

Company Name
PC Chanda & Co. PVT Ltd.
Address
Ravi Auto House, 103 Park Street, 6th Floor, Kolkata 700016
Country
India

View All Listings by this Company

WRAS Approval Number: #2205577

'TIANYI SUNS-012'. Factory applied, black coloured, bituminous coating. Apply as per manufacturer's user instructions 'File No.: Tianyi Suns-0024, Version: TYS-03, Date of issue: 2021-05-05'. Cure for 2 hours @60°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 2205577
Expiry date:: 31/05/2027

Approval Holder:: Tianyi Suns Pipe & Fittings Co., Ltd.

Company Name
Tianyi Suns Pipe & Fittings Co., Ltd.
Address
2802, Building B, Yangguangcheng No. 8, Changxingnanjie, Jinyuan District, Taiyuan, Shanxi
Country
China

View All Listings by this Company

WRAS Approval Number: #2311529

'Valcoat Blue'. Factory applied, blue coloured epoxy coating. Pre-heat the substrate and apply as per manufacturer's TDS with issue '01.04.2023'. Post-cure for 5-7 minutes@180°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2311529
Expiry date:: 30/11/2028

Approval Holder:: Rapid Coat Division

Company Name
Rapid Coat Division
Address
A-11/1, Site IV, Madan Mohan Malviya Marg, Sahibabad, UP 201010
Country
India

View All Listings by this Company

WRAS Approval Number: #2311532

'TM-cement-01'. Factory applied, grey coloured cement. Mix sand/cement/water in a weight ratio of 1.7:1.0:0.74 and apply as per manufacturer's instructions 'TM20231122-A0', dated 2023-11-22. Cure for 6 hours@25°C (±2°C). Between November 2023 and November 2024, the material was for use with water up to 23°C. Between December 2024 and November 2028, the material is for use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2311532
Expiry date:: 30/11/2028

Approval Holder:: Fujian Tai Ming Casting Pipes Technology Co., Ltd.

Company Name
Fujian Tai Ming Casting Pipes Technology Co., Ltd.
Address
Xiaojiao Industrial Park, Meilie Economic development zone, Sanming City
Country
Fujian Province,

View All Listings by this Company

WRAS Approval Number: #2311533

'JDFF epoxy powder coating’. Factory applied, blue coloured fusion bonded epoxy coating. Apply as per manufacturer`s instructions (Procedure #: Pc-01-3, Work Instruction #: JDFF WI-Pc-01-3-1, Revision #: 2, Issue #: 5, date: 10-01-2023). Cure for 2½ minutes at 232°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2311533
Expiry date:: 30/11/2028

Approval Holder:: JDFF Ductile Fitting Factory

Company Name
JDFF Ductile Fitting Factory
Address
Dammam 34332 – 2708, 6736 – 2nd Industrial Area
Country
Saudi Arabia

View All Listings by this Company