Range of green Sappro butt-welded polypropylene fittings for use with Sappro PPR pipes. Maximum working pressure: 20 Bar. Maximum operating temperature: 23°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250802006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Sappro logo and size on body. Sappro logo, ISO 15874-2 and size on pipe body

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

Pipe: SFP6285205000015 20 mm SFP6285205000022 25 mm SFP6285205000039 32 mm SFP6285205000046 40 mm SFP6285205000053 50 mm SFP6285205000060 63 mm SFP6285205000077 75 mm SFP6285205000084 90 mm Elbow 90°: SFP6285205002613 20 mm SFP6285205002620 25 mm SFP6285205002637 32 mm SFP6285205002644 40 mm SFP6285205002651 50 mm SFP6285205002668 63 mm SFP6285205002675 75 mm SFP6285205002682 90 mm Elbow 45°: SFP6285205002798 20 mm SFP6285205002804 25 mm SFP6285205002811 32 mm SFP6285205003030 40 mm SFP6285205003047 50 mm SFP6285205003054 63 mm SFP6285205003061 75 mm SFP6285205003078 90 mm Equal Tee: SFP6285205003566 20 mm SFP6285205003573 25 mm SFP6285205003580 32 mm SFP6285205003597 40 mm SFP6285205003603 50 mm SFP6285205003610 63 mm SFP6285205003627 75 mm SFP6285205003634 90 mm Socket: SFP6285205003221 20 mm SFP6285205003238 25 mm SFP6285205003245 32 mm SFP6285205003252 40 mm SFP6285205003269 50 mm SFP6285205003276 63 mm SFP6285205003283 75 mm SFP6285205003290 90 mm Bridge Bend: SFP6285205001593 20mm SFP6285205001609 25mm SFP6285205001616 32mm Socket Bridge Bend: SFP6285205002033 25mm End Cap: SFP6285205003740 20mm SFP6285205003962 25mm SFP6285205003979 32mm SFP6285205003986 40mm SFP6285205003993 50mm SFP6285205004006 63mm SFP6285205004013 75mm SFP6285205004020 90mm Male Plug: SFP6285205004136 20mm Reducer Socket: SFP6285205007267 25mm x 20mm SFP6285205007281 32mm x 25mm SFP6285205007274 32mm x 20mm SFP6285205007304 40mm x 25mm SFP6285205007311 40mm x 32mm SFP6285205007313 50mm x 25mm SFP6285205007314 50mm x 32mm SFP6285205007315 50mm x 40mm SFP6285205007317 63mm x 25mm SFP6285205007318 63mm x 32mm SFP6285205007319 63mm x 40mm SFP6285205007320 63mm x 50mm Reducer: SFP6285205005331 75mm x 32mm SFP6285205005348 75mm x 40mm SFP6285205005355 75mm x 50mm SFP6285205005362 75mm x 63mm Reducer Tee: SFP6285205005911 25mm x 20mm SFP6285205006208 32mm x 25mm SFP6285205006222 40mm x 25mm SFP6285205006239 40mm x 32mm SFP6285205006604 50mm x 25mm SFP6285205006628 50mm x 32mm SFP6285205006642 63mm x 25mm SFP6285205006666 63mm x 32mm SFP6285205006673 63mm x 40mm SFP6285205006697 75mm x 32mm SFP6285205006703 75mm x 40mm SFP6285205006710 75mm x 50mm SFP6285205006727 75mm x 63mm Female Socket: SFP6285205007625 20mm x 1/2" BSP (F) SFP6285205007626 20mm x 3/4" BSP (F) SFP6285205007627 25mm x 1/2" BSP (F) SFP6285205007628 25mm x 3/4" BSP (F) SFP6285205007629 32mm x 1/2" BSP (F) SFP6285205007630 32mm x 3/4" BSP (F) SFP6285205007631 32mm x 1" BSP (F) Male Socket: SFP6285205007660 20mm x 1/2" BSP (M) SFP6285205007661 20mm x 3/4" BSP (M) SFP6285205007662 25mm x 1/2" BSP (M) SFP6285205007663 25mm x 3/4" BSP (M) SFP6285205007664 32mm x 1/2" BSP (M) SFP6285205007665 32mm x 3/4" BSP (M) Female Double Tee: SFP6285205007458 25mm x 1/2" BSP (F) Female Elbow: SFP6285205008039 20mm x 1/2" BSP (F) SFP6285205008041 25mm x 1/2" BSP (F) SFP6285205008042 25mm x 3/4" BSP (F) SFP6285205008043 32mm x 1/2" BSP (F) SFP6285205008044 32mm x 3/4" BSP (F) SFP6285205008045 32mm x 1" BSP (F) Male Elbow: SFP6285205008055 25mm x 1/2" BSP (M) SFP6285205008056 25mm x 3/4" BSP (M) SFP6285205008058 32mm x 1" BSP (M) Male Hexagon: SFP6285205008025 32mm x 1" BSP (M) SFP6285205008027 40mm x 1 1/4" BSP (M) SFP6285205008028 50mm x 1 1/2" BSP (M) SFP6285205008029 63mm x 2" BSP (M) SFP6285205008030 75mm x 2 1/2" BSP (M) SFP6285205008031 90mm x 3" BSP (M) Female Tee: SFP6285205007599 25mm x 1/2" BSP (F) SFP6285205007600 25mm x 3/4" BSP (F) SFP6285205007601 32mm x 1/2" BSP (F) SFP6285205007602 32mm x 3/4" BSP (F) SFP6285205007603 32mm x 1" BSP (F)

Approval Holder:

SAUDI FACTORY CO, FOR PLASTIC PRODUCTS

Company Name

SAUDI FACTORY CO, FOR PLASTIC PRODUCTS

Address

Albjadiya Industrial RIYADH

Country

Saudi Arabia

View All Listings by this Company

EG Range of copper, brass capillary lead free solder ring fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

25070827

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Eagle brand logo on fitting.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

EG1 Straight Coupling 15mm， 22mm， 28mm， 35mm， 42mm， 54mm EG1M Metric/ Imperial Adaptor 15mm x 1/2"， 22mm x 3/4" EG1R Reducing coupling 22mm x 15mm，28mm x 15mm，28mm x 22mm， 35mm x 22mm，35mm x 28mm，42mm x 28mm， 42mm x 35mm，54mm x 35mm，54mm x 42mm EG1S Slip Coupling 15mm， 22mm， 28mm EG2 Straight Female Connector 15mm x 1/2"，22mm x 1/2"，22mm x 3/4"，28mm x 1"，35mm x 1 1/4"，42mm x 1 1/2"，54mm x 2" EG3 Straight Male Connector 15mm x 1/2"，22mm x 3/4"，28mm x 1"，35mm x 1 1/4"，42mm x 1 1/2"，54mm x 2" EG6 Fitting Reducer 22mm x 15mm，28mm x 15mm，28mm x 22mm， 35mm x 15mm，35mm x 22mm，35mm x 28mm， 42mm x 22mm，42mm x 28mm，42mm x 35mm， 54mm x 28mm，54mm x 35mm，54mm x 42mm EG12 90° Elbow 22mm， 28mm， 35mm， 42mm， 54mm EG12S Street Elbow 15mm， 22mm， 28mm EG13 Male Elbow 15mm x 1/2"，22mm x 3/4" EG14 Female Elbow 15mm x 1/2"，22mm x 1/2"，22mm x 3/4" EG15 Wallplate Elbow 15mm x 1/2" EG21 45° Elbow 15mm， 22mm， 28mm， 35mm， 42mm， 54mm EG24 Equal Tee 15mm， 22mm， 28mm， 35mm， 42mm， 54mm EG25 Reduced Branch Tee 22mm x 22mm x 15mm， 28mm x 28mm x 15mm ， 28mm x 28mm x 22mm， 35mm x 35mm x 15mm ， 35mm x 35mm x 22mm， 35mm x 35mm x 28mm ， 42mm x 42mm x 15mm， 42mm x 42mm x 22mm ， 42mm x 42mm x 28mm， 42mm x 42mm x 35mm ， 54mm x 54mm x 15mm， 54mm x 54mm x 22mm ， 54mm x 54mm x 28mm， 54mm x 54mm x 35mm ， 54mm x 54mm x 42mm EG26 Reduced One End Tee 22mm x 15mm x 22mm， 28mm x 15mm x 28mm ， 28mm x 22mm x 28mm EG27 Reduced End & Branch Tee 22mm x 15mm x 15mm， 28mm x 22mm x 15mm ， 28mm x 22mm x 22mm EG28 Two Reduced End Tee 15mm x 15mm x 22mm，22mm x 22mm x 28mm EG30 Centre Female Tee 15mm x 15mm x 1/2"，22mm x 22mm x 1/2"，22mm x 22mm x 3/4" EG61 Stop End 22mm， 28mm， 35mm， 42mm， 54mm

Approval Holder:

SCE Technology (Ningbo) Co.,Ltd.

Company Name

SCE Technology (Ningbo) Co.,Ltd.

Address

No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Zhejiang

Country

China

View All Listings by this Company

"PRESSTITE" range of press fittings with nickel plated brass bodies incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved by a TH crimping profile. For above ground use only. Maximum working pressure 10.0 bar. 20 & 26mm pressfit sizes cold water use only. Threaded and pressfit 16mm size maximum operating temperature 95°C. From June 2025: The 20 & 26mm pressfit sizes maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404724

Size:

Pressfit: 16, 20 & 26mm. Threaded: ½”, ¾” & 1” BSP (M)/(F) or captive nut.

Marking:

IDC logo: E mark (~E~ within circle), profile type (TH), size and PN on fitting body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Straight PEX x PEX (press x press): 900310002 - 16mm x 16mm 900310003 - 20mm x 20mm 900310004 - 26mm x 26mm Reduce Straight PEX x PEX (press x press): 900310032 - 20mm x 16mm 900310042 - 26mm x 16mm 900310043 - 26mm x 20mm Straight PEX x Female (press x female): 900312003 - 20mm x 1/2"F 900312004 - 26mm x 3/4"F 900312023 - 16mm x 1/2"F 900312034 - 20mm x 3/4"F 900312045 - 26mm x 1"F Stop end (press): 900372002 - 16mm 900372003 - 20mm 900372004 - 26mm Elbow (press): 900315002 - 16mm 900315003 - 20mm 900315004 - 26mm Elbow PEX x Male (press x male): 900316023 - 16mm x 1/2"M 900316003 - 20mm x 1/2"M 900316034 - 20mm x 3/4"M 900316004 - 26mm x 3/4"M Elbow PEX x Female (press x female): 900317023 - 16mm x 1/2"F 900317003 - 20mm x 1/2"F 900317034 - 20mm x 3/4"F 900317004 - 26mm x 3/4"F Wall Plate PEX x Female (press x female): 900307023 - 16 x 1/2"F 900307003 - 20 x 1/2"F 900307034 - 20 x 3/4"F 900307004 - 26 x 3/4"F Equal Tee (press): 900318002 - 16mm 900318003 - 20mm 900318004 - 26mm Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): 900318232 - 16 x 20 x 16 900318322 - 20 x 16 x 16 900318323 - 20 x 16 x 20 900318332 - 20 x 20 x 16 900318343 - 20 x 26 x 20 900318422 - 26 x 16 x 16 900318423 - 26 x 16 x 20 900318424 - 26 x 16 x 26 900318432 - 26 x 20 x 16 900318433 - 26 x 20 x 20 900318434 - 26 x 20 x 26 900318442 - 26 x 26 x 16 900318443 - 26 x 26 x 20 900318454 - 26 x 32 x 26 Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): 900330004 - 26 x 3/4"F x 20 900330023 - 16 x 1/2"F x 16 900330033 - 20 x 1/2"F x 20 900330034 - 20 x 3/4"F x 20 900330043 - 26 x 1/2"F x 26

Approval Holder:

Hevac Ltd

Company Name

Hevac Ltd

Address

Muirfield Drive Naas Road Dublin 12

Postcode

D12 X0A3

Country

Ireland

Phone

0035 314 191924

General Email

dave.grenville@hevac.ie

View All Listings by this Company

Manufacturer:

IDC Plumbing & Heating Technology (Beijing) Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

5000 series of copper end feed fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250708026

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Eagle brand logo on fitting.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

5001A 90° Street bend 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5002G 90° Bent tap Connector 15mm x ½”, 15mm x ¾”, 22mm x ¾” 5002A 90° Bend 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5040 45° Street Elbow 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5041 45° Elbow 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5085 Full Crossover 15mm, 22mm 5086 Partial Crossover 15mm, 22mm 5090 90° Elbow 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5090R 90° Elbow 22mm x 15mm 5092 90° Street Elbow 10mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm 5130 Equal Tee 8mm, 10mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm 5301 End Cap 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5130R Reducing Tee 15mmx22mmx15mm，22mmx15mmx15mm， 22mmx15mmx22mm，22mmx22mmx15mm， 22mmx28mmx22mm，28mmx15mmx15mm， 28mmx15mmx28mm，28mmx22mmx22mm， 28mmx22mmx28mm，28mmx28mmx15mm， 28mmx28mmx22mm，35mmx15mmx35mm， 35mmx22mmx35mm，35mmx28mmx28mm， 35mmx28mmx35mm，42mmx15mmx42mm， 42mmx22mmx42mm，42mmx28mmx42mm， 42mmx35mmx42mm，54mmx15mmx54mm， 54mmx22mmx54mm，54mmx28mmx54mm， 54mmx35mmx54mm，54mmx42mmx54mm 5240 Reducing Coupling 22mm x 15mm，28mm x 15mm，28mm x 22mm， 35mm x 15mm，35mm x 22mm，35mm x 28mm， 42mm x 15mm，42mm x 22mm，42mm x 28mm， 42mm x 35mm，54mm x 22mm，54mm x 28mm 54mm x 35mm, 54mm x 42mm 5421 Metric imperial Coupling 15mm x ½”, 22mm x ¾” 5270 Straight Coupling 15mm， 22mm， 28mm, 35mm, 42mm, 54mm 5243 Fitting reducer 22mm x 15mm，28mm x 15mm，28mm x 22mm， 35mm x 15mm，35mm x 22mm，35mm x 28mm， 42mm x 15mm，42mm x 22mm，42mm x 28mm， 42mm x 35mm，54mm x 22mm，54mm x 28mm 54mm x 35mm, 54mm x 42mm 5359G Straight Tap Connector 15mm x 1/2"，15mm x 3/4"，22mm x 3/4"

Approval Holder:

SCE Technology (Ningbo) Co.,Ltd.

Company Name

SCE Technology (Ningbo) Co.,Ltd.

Address

No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Zhejiang

Country

China

View All Listings by this Company

Range of blue epoxy coated ductile iron flanged dismantling fittings. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C

Section:

1220 Fittings for use with Tube and Pipe

Section Subtitle:

Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.

WRAS Approval Number:

250702050

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50-DN2000 flanged

Marking:

FAMAT (brand of SAPAG), size, PN and GGG50 on data plate

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

DJ1

Product Images

Approval Holder:

SAPAG VALVES

Company Name

SAPAG VALVES

Address

2 rue du Marais HAM

Postcode

80400

Country

France

Phone

+33 (0)3 23 81 42 87

General Email

eric.vincent@sapag-valves.com

View All Listings by this Company

Near boiling hot water dispensers with stainless steel tanks and flow is controlled via float switch. Maximum working pressure 3 Bar. Maximum operating temperature 98°C.

Section:

1380 Heaters

Section Subtitle:

Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

241202719

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/8” BSP M inlet/outlet

Marking:

Alfred Victoria "crown" logo on front of body. Model and product info on label on rear of body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

F104M

Approval Holder:

ALFRED VICTORIA LIMITED

Company Name

ALFRED VICTORIA LIMITED

Postcode

B45 9AL

View All Listings by this Company

Shock arrestors with a copper body, plastic shuttle and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

AXCU-A: ½” NPT (M), AXCU-B: ¾” NPT (M), AXCU-C: 1” NPT (M).

Marking:

Aquanox logo, pipe size, model number, pressure and temperature on body

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

AXCU-A AXCU-B AXCU-C

Approval Holder:

Hydro Point Building Material Trading LLC

Company Name

Hydro Point Building Material Trading LLC

Address

Kasco Tower Al Qiasis Industrial Area 3 Dubai

Country

United Arab Emirates

Phone

0097 1422 18499

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 2.0 bar (MS(s) models), 4.0 bar (AM(E) models) Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102725

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

TERAL, model, size & technical information on date label on body. Flow arrow on cover.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

MS(m)XXX-XX-E 1.m: different phase. --m: single phase, none: three phases 2.XXX: Rated flow (L/min) 3.XX: Rated power(kW). 4.E: E type end connection mode and size -- Rated flow(70-120m3/h): G1¼"XG1" -- Rated flow(210m3/h): G1½"XG1¼" -- Rated flow (370 m3/h): G2"XG1¼ AM(E) XXxXX (B) X/X-X XX(S) 1. E: Intelligent Type 2. XX: Inlet diameter (mm), range: 25,32,40,50 mm. 3. XX: Outlet diameter (mm), range: 25,32,40,50 mm. 4. B: alternative pump group 4. X/X: number of impeller /number of smaller impeller (if any) 5. X: motor frequency 6. XX: Rated power(kW) 7. S: different phase (S: single phase, none: three phases.)

Manufacturer:

Teral Asia Ltd

Company Name

Teral Asia Ltd

Address

Room 1001 10/F, Olympia Plaza, 255 Kings Road, North Point

Country

Hong Kong

View All Listings by this Company

Overhead shower (plastic body – various plated finishes) incorporating a flow regulator and stainless-steel strainer washer. Open outlet use only Maximum operating temperature 85°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250788013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F)

Marking:

Aqualisa on body.

Installation Requirements:

R001 R040

Expiry date:

31/07/2030

Model:

ACY1004.ECO

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Shower handset with chromium plated plastic bodies with a check valve fitted at the inlets however, the complete products have not been fully tested to demonstrate they provide backflow prevention. Maximum working pressure: Open outlet. Maximum operating temperature: 60.0°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250702052

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP Male

Marking:

Bristan on body

Installation Requirements:

R001 R040

Expiry date:

31/07/2030

Model:

HAND117 C.

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company