Directory Search Results

Print List

#2306025

Range of electronically controlled ion exchange water softeners (salt regenerated) for commercial and domestic use. Maximum working pressure 5.0 bar. Cold water use

Section:
2450 Water softeners
WRAS Approval Number:
2306025
Note:
When used within a domestic premises, IRN R150 applies. When used within a non-domestic or commercial premises, IRN R160 applies.
Size:
¾” BSP (M)
Marking:
BWT logo on body. BWT logo, model, serial number, temperature and other technical information on adhesive label inside front cover
Installation Requirements:
R001 R150 R160 R170 R290 R415 R510
Expiry date:
30/06/2028
Model:
WS255 BWT 10 Litre water softener WS355 BWT 15 Litre water softener WS655 BWT 20 Litre water softener WS755 BWT 25 Litre water softener WS455 BWT 10 Litre water softener WS555 BWT 15 Litre water softener SL10 BWT Softlux 10 Litre Softener SL14 BWT Softlux 14 Litre Softener SL20 BWT Softlux 20 Litre Softener SL25 BWT Softlux 25 Litre Softener SL10P BWT Softlux 10 Litre Softener SL14P BWT Softlux 14 Litre Softener PS10UK Perla Silk 10 Litre Luxury water Softener PS15UK Perla Silk 15 Litre Luxury water Softener PS20UK Perla Silk 20 Litre Luxury water Softener PS25UK Perla Silk 25 Litre Luxury water Softener
Product Images

Approval Holder:
BWT Holding GmbH
Company Name
BWT Holding GmbH
Address
Walter-Simmer-Straße 4 Mondsee
Postcode
5310
Country
Austria
Phone
+436648172152
General Email
andreas.stiegler@aidu.solutions

View All Listings by this Company
Manufacturer:
BWT Holding GmbH
Company Name
BWT Holding GmbH
Address
Walter-Simmer-Straße 4 Mondsee
Postcode
5310
Country
Austria
Phone
+436648172152
General Email
andreas.stiegler@aidu.solutions

View All Listings by this Company

Print This Approval


#2306064

Electronically controlled, commercial ion exchange water softeners. Maximum working pressure 7.0 bar. Cold water use only

Section:
2450 Water softeners
Size:
2” BSP (F)
Marking:
Wycombe logo, Size other technical information on adhesive label on Valve housing
Installation Requirements:
R001 R008 R160 R170 R290 R415 R510
Expiry date:
30/06/2028
Model:
FLS29-125 2910 – 125 Litre. FLS29-150 2910 – 150 Litre. FLS29-250 2910 – 250 Litre. FLS29-350 2910 – 350 Litre. FLS29-500 2910 – 500 Litre. FLS29-750 2910 – 750 Litre.
Product Images

Approval Holder:
Wycombe Water Ltd.
Company Name
Wycombe Water Ltd.
Address
6 Premus Coldharbour Way, Aylesbury HP19 8AP Aylesbury Bucks
Postcode
HP19 8AP
Country
United Kingdom
Phone
01480355446
General Email
sales@uvo3.co.uk

View All Listings by this Company
Manufacturer:
Wycombe Water Ltd.
Company Name
Wycombe Water Ltd.
Address
6 Premus Coldharbour Way, Aylesbury HP19 8AP Aylesbury Bucks
Postcode
HP19 8AP
Country
United Kingdom
Phone
01480355446
General Email
sales@uvo3.co.uk

View All Listings by this Company

Print This Approval


#2304549

'KEBAFORM C 90W natural' & 'KEBAFORM C 90W schwarz'. Natural (appears white) and black coloured, injection moulded POM materials. For use with water up to 65°C.

Section:
5015 Acetal
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2304549
Expiry date:
30/04/2028

Approval Holder:
BARLOG Plastics GmbH
Company Name
BARLOG Plastics GmbH
Address
Am Weidenbach 8-10, 51491 Overath
Country
Germany
Phone
+49 2206 90851-100
General Email
customerservice@barlogplastics.com

View All Listings by this Company

Print This Approval


#2206550

'Titanseal 989'. Site applied, two-component, grey coloured (once mixed) polyurethane coating. Mix the grey coloured (opaque) base coating with the amber coloured hardener in a 3:1 volume ratio and apply Coat 1 as per manufacturer's application instructions dated '09.03.2018'. Cure for 4 hours@7°C. Mix and apply Coat 2 using the same mix ratio and application instructions and then cure for 14 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2206550
Expiry date:
30/06/2027

Approval Holder:
Gennor (UK) Ltd.
Company Name
Gennor (UK) Ltd.
Address
15 Nineveh Shipyard River Road Arundel
Postcode
BN18 9SU
Country
West Sussex

View All Listings by this Company

Print This Approval


#2304547

'Epilux QD DW Coating - Blue'. Factory applied, blue coloured, two-component epoxy coating. Mix Base and Catalyst in a 3:1 volume ratio and apply as per manufacturer's 'Product Information Data Sheet No: 780', 'Revision: 00', 'Issue Date Feb-22'. Cure for 7 days@30°C. For use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2304547
Expiry date:
30/04/2028

Approval Holder:
Berger Paints India Limited
Company Name
Berger Paints India Limited
Address
14 & 15 Swarnamoyee Road, Howrah - 711103, West Bengal
Country
India

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1132 of 2278

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.