'Jotapipe IL 6001-120S'. Factory applied, blue coloured fusion bonded epoxy coating. Apply as per manufacturer`s TDS dated 22nd August 2018. Cure for 35 minutes@200°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

240755009

Expiry date:

31/07/2029

Approval Holder:

Jotun Powder Coatings Saudi Arabia Co. Ltd.

Company Name

Jotun Powder Coatings Saudi Arabia Co. Ltd.

Address

P.O. Box 10830, Dammam 31443

Country

Saudi Arabia

View All Listings by this Company

'Strongcoat EPW-P'. Site applied, two-component, light grey coloured (once applied) epoxy coating. Mix Part A (light grey coloured liquid) with Part B (orange coloured liquid) in a 8.1:3.78 volume ratio and apply coat 1 as per manufacturer's TDS 06-0020-A-2021. Cure for 24 hours@23°C. Mix and apply coat 2 in the same way as coat 1 and cure for 7 days@23°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2312565

Expiry date:

31/12/2028

Approval Holder:

DCP Saudi Co.

Company Name

DCP Saudi Co.

Address

Sulay Industrial Area, Istanbul St. Riyadh

Country

Saudi Arabia

View All Listings by this Company

'DESCAFLEX PWH-300 601701, 601568 & 601700'. Range of black coloured, extruded polyethylene cables consisting of an outer sheath (available in two different thicknesses) and three or four inner cables. For use with water up to 85°C.

Section:

5140 Hoses & Tubing

Expiry date:

31/05/2029

Approval Holder:

Desca AG

Company Name

Desca AG

Address

Lerzenstrasse 14, CH-8953 Dietikon

Country

Switzerland

View All Listings by this Company

'LUBKOTE® E352, LUBKOTE® SG96(N96), LUBKOTE® SG98(N98)'. White coloured lubricants. Apply as per manufacturer's product data sheet 'YC20231201-1'. For use with water up to 85°C.

Section:

5160 Lubricants

Expiry date:

30/04/2029

Approval Holder:

Yuchen Tech (HK) Co. Ltd.

Company Name

Yuchen Tech (HK) Co. Ltd.

Address

RM 2914 (B), Ho King Commercial Centre, 2-16 Fa Yuen Street, Mongkok

Country

Hong Kong

View All Listings by this Company

Range of wedge shoes (part numbers 2005036, 2006536, 2008036, 2010036, 2012536, 2015036, 2020036, 2025036, 2030036, 2040036, 2650036, 2660036, 40005036, 40006536, 40008036, 40010036, 40015036, 40020036, 40025036, 2680036 & 126100036). Black coloured, injection moulded nylon wedge shoes. For use with water up to 50°C.

Section:

5175 Nylon

Section Subtitle:

Components.

WRAS Approval Number:

240755007

Expiry date:

31/07/2029

Approval Holder:

AVK International A/S

Company Name

AVK International A/S

Address

Bizonveji, Skovby, DK-8464 Galten

Country

Denmark

Phone

+45 8754 2271

View All Listings by this Company