Water Regulations Approval Scheme Ltd

Fittings and Pipe - Compatible Systems

Section Code 1100 : Unless specified in the individual approval, the products within this section are not suitable for below ground use

Back To Directory Sections

WRAS Approval Number: #250302020

Range of stainless-steel press fittings with EPDM ‘O’-rings and EPDM washers. For use with stainless-steel pipe. Joints are achieved using a press fitting tool. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250302020
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: Aquapipe, Size and Grade (316L) on body - Aquapipe, Size and Grade (316L) on pipe.
Installation Requirements:: R001
Expiry date:: 31/03/2030
Model:: AQ00 PIPE Metal pipe in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm, Ø108mm AQ01 PIPE BRIDGE Metal pipe bridge in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm AQ02 EQUAL COUPLING in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm 76.1mm Ø88.9mm Ø108mm AQ03 ADJUSTABLE COUPLING in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm Ø108mm AQ04 90°EQUAL ELBOW in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm Ø108mm AQ05 90°PLAIN ELBOW in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm Ø108mm AQ06 45°EQUAL ELBOW in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm Ø108mm AQ07 45°PLAIN ELBOW in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm Ø108mm AQ08 EQUAL TEE in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm Ø108mm AQ09 PIPE CAP in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm Ø108mm AQ10 REDUCING TEE in SUS316L/ SUS304 Ø22-Ø18, Ø28-Ø18, Ø28-Ø22, Ø35-Ø18, Ø35-Ø22, Ø35-Ø28,Ø42-Ø18, Ø42-Ø22, Ø42-Ø28, Ø42-Ø35, Ø54-Ø18, Ø54-Ø22, Ø54- Ø28, Ø54-Ø35, Ø54-Ø42, Ø76.1-Ø18, Ø76.1-Ø22, Ø76.1-Ø28, Ø76.1-Ø35, Ø76.1-Ø42, Ø76.1-Ø54, Ø88.9-Ø18, Ø88.9-Ø22, Ø88.9- Ø28, Ø88.9-Ø35, Ø88.9-Ø42, Ø88.9-Ø54, Ø88.9-Ø76.1, Ø108-Ø18, Ø108-Ø22, Ø108-Ø28, Ø108-Ø35,Ø108-Ø42,Ø108-Ø54,Ø108- Ø76.1, Ø108-Ø88.9 AQ11 90°ELBOW FEMALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-1/2, Ø22-3/4, Ø28-3/4, Ø28-1, Ø35-1 1/4, Ø42-1 1/2, Ø54-2 AQ12 90°ELBOW MALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-1/2, Ø22-3/4, Ø28-3/4, Ø28-1, Ø35-1, Ø35-1 1/4, Ø42-1 1/4, Ø42-1 1/2, Ø54-1 1/2, Ø54-2 AQ13 COUPLING MALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-1/2, Ø22-3/4, Ø22-1, Ø28-1/2, Ø28-3/4, Ø28-1, Ø28-1 1/4, Ø35-1, Ø35-1 1/4, Ø35-1 1/2, Ø42-1 1/4, Ø42-1 1/2, Ø54-1 1/2, Ø54-2, Ø76.1-2 1/2, Ø88.9-3 AQ14 COUPLING FEMALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-1/2, Ø22-3/4, Ø22-1, Ø28-1/2, Ø28-3/4, Ø28-1, Ø28-1 1/4, Ø35-1, Ø35-1 1/4, Ø35-1 1/2, Ø42-1 1/2, Ø42-1 1/4, Ø54-1 1/2, Ø54-2, Ø76.1-2 1/2, Ø88.9-3 AQ15 REDUCING COUPLING in SUS316L/ SUS304 Ø22-Ø18, Ø28-Ø18, Ø28-Ø22, Ø35-Ø18, Ø35-Ø22, Ø35-Ø28, Ø42-Ø18, Ø42-Ø22, Ø42-Ø28, Ø42-Ø35, Ø54-Ø18, Ø54-Ø22, Ø54-Ø28, Ø54-Ø35, Ø54-Ø42, Ø76.1-Ø18, Ø76.1-Ø22, Ø76.1-Ø28, Ø76.1-Ø35, Ø76.1-Ø42, Ø76.1-Ø54, Ø88.9-Ø18, Ø88.9-Ø22, Ø88.9- Ø28, Ø88.9-Ø35, Ø88.9-Ø42, Ø88.9-Ø54, Ø88.9-Ø76.1, Ø108-Ø18, Ø108-Ø22, Ø108-Ø28, Ø108-Ø35, Ø108-Ø42, Ø108-Ø54, Ø108-Ø76.1, Ø108-Ø88.9 AQ16 PLAIN REDUCING COUPLING in SUS316L/ SUS304 Ø22-Ø18, Ø28-Ø18, Ø28-Ø22, Ø35-Ø18, Ø35-Ø22, Ø35-Ø28, Ø42-Ø18, Ø42-Ø22, Ø42-Ø28, Ø42-Ø35, Ø54-Ø18, Ø54-Ø22, Ø54- Ø28, Ø54-Ø35, Ø54-Ø42, Ø76.1-Ø54, Ø88.9-Ø54, Ø88.9-Ø76.1, Ø108-Ø54, Ø108-Ø76.1, Ø108-Ø88.9 AQ17 UNION MALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-1/2, Ø22-3/4, Ø22-1, Ø28-3/4, Ø28-1, Ø35-1 1/4, Ø35-1 1/2, Ø42-1 1/2, Ø54-2 AQ18 UNION FEMALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-3/4, Ø22-1, Ø28-1, Ø28-1 1/4, Ø35-1 1/4, Ø35-1 1/2, Ø42-1 1/2, Ø42-2, Ø54-2 AQ19 SHORT TEE MALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-1/2, Ø22-3/4, Ø28-1/2, Ø28-3/4, Ø28-1, Ø35-1/2, Ø35-3/4, Ø35-1, Ø35-1 1/4, Ø42-1/2, Ø42-3/4, Ø42-1, Ø42-11/4, Ø42-1 1/2, Ø54-1/2, Ø54-3/4, Ø54-1, Ø54-1 1/4, Ø54-1 1/2 Ø54-2 AQ20 SHORT TEE FEMALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-1/2, Ø22-3/4, Ø28-1/2, Ø28-3/4, Ø28-1, Ø35-1/2, Ø35-3/4, Ø35-1, Ø35-1 1/4, Ø42-1/2, Ø42-3/4, Ø42-1, Ø42-1 1/4, Ø42-1 1/2, Ø54-1/2, Ø54-3/4, Ø54-1, Ø54-1 1/4, Ø54-1 1/2, Ø54-2, Ø76.1-3/4, Ø76.1-2, Ø88.9-3/4, Ø88.9-2, Ø108-3/4, Ø108-2 AQ21 BASED ELBOW FEMALE in SUS316L/ SUS304 Ø18-1/2, Ø22-1/2, Ø22-3/4, Ø28-1/2, Ø28-1 AQ22 SHORT ELBOW FEMALE in SUS316L/ SUS304 Ø18-1/2, Ø22-1/2, Ø22-3/4, Ø28-1/2, Ø28-3/4,Ø28-1 AQ23 FLANGE in SUS316L/ SUS304 Ø35, Ø42, Ø54, Ø76.1, Ø88.9, Ø108 AQ24 REDUCING FLANGE PIPE in SUS316L/ SUS304 Ø76.1-Ø54, Ø76.1-Ø88.9, Ø88.9-Ø76.1, Ø88.9-Ø108, Ø108-Ø88.9, Ø133-Ø108 There are two kinds of body materials： SUS316L or SUS304 Stainless Steel Pipe according to EN 10312；M-profile press fittings. All imperial fittings are BSP.

Approval Holder:: ZHEJIANG COMPRESSED FLUID TECHNOLOGY CO.,LTD

Company Name
ZHEJIANG COMPRESSED FLUID TECHNOLOGY CO.,LTD
Address
No.18 Mo Gan Shan Road, Beilun District Ningbo, Zhejiang Province
Country
China
General Email
technical02@shangdurz.com

View All Listings by this Company

WRAS Approval Number: #241108017

Range of CU type press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 241108017
Size:: see models
Marking:: Flowflex logo, WRAS & size etched on body.
Installation Requirements:: R001
Expiry date:: 30/04/2029
Model:: 5063022703699 PRESS 45DEG STREET ELBOW 15mm 5063022703569 PRESS 45DEG STREET ELBOW 22mm 5063022703705 PRESS 45DEG STREET ELBOW 28mm 5063022703576 PRESS 45DEG ELBOW 15mm 5063022703590 PRESS 45DEG ELBOW 22mm 5063022703682 PRESS 45DEG ELBOW 28mm 5063022703637 PRESS EQUAL ELBOW 15mm 5063022703620 PRESS EQUAL ELBOW 22mm 5063022703750 PRESS EQUAL ELBOW 28mm 5063022703613 PRESS STREET ELBOW 22mm 5063022703743 PRESS STREET ELBOW 28mm 5063022703781 PRESS EQUAL TEE 15mm 5063022703521 PRESS EQUAL TEE 22mm 5063022703767 PRESS EQUAL TEE 28mm 5063022703729 PRESS REDUCED END TEE 5063022703712 PRESS REDUCED BRANCH TEE 5063022703774 PRESS FITTING REDUCER 22 x 15mm 5063022703736 PRESS FITTING REDUCER 28 x 15mm 5063022703545 PRESS FITTING REDUCER 28 x 22mm 5063022703644 PRESS COUPLING 15mm 5063022703675 PRESS COUPLING 22mm 5063022703583 PRESS COUPLING 28mm 5063022703606 PRESS SLIP COUPLER 15mm 5063022703651 PRESS SLIP COUPLER 22mm 5063022703668 PRESS STOP END 15mm 5063022703538 PRESS STOP END 22mm 5063022703552 PRESS STOP END 28mm

Approval Holder:: Kingfisher International Products Ltd.

Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company
Manufacturer:: Flowflex Components Ltd.

Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Country
United Kingdom
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company

WRAS Approval Number: #250504005

Range of clamp fittings incorporating DZR brass bodies. For use with PE 100 RC pipe (manufactured to EN12201) only. Maximum operating pressure: 16 bar. Cold water use only.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250504005
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: SEE MODELS
Marking:: Uponor logo (U), CR, W (wipex code on connections) and size.
Installation Requirements:: R001
Expiry date:: 31/05/2030
Model:: Wipex coupling: 1018328 (size 25x2,3-G1) 1018329 (size 32x2,9-G1) 1018330 (size 40x3,7-G1 ¼) 1018331 (size 50x4,6-G1 ¼) 1018332 (size 63x5,8-G2) 1018333 (size 75x6,8-G2) 1018334 (size 90x8,2G3) 1018335 (size 110x10,0-G3) Wipex tee: 1018345 (size G1-G1-G1) 1018346 (size G1 ¼-G1 ¼-G1 ¼) 1018347 (size G2-G2-G2) 1018348 (size G3-G3-G3) Wipex elbow: 1018350 (size G1-G1) 1018351 (size G1 ¼-G1 ¼) 1018352 (size G2-G2) 1018353 (size G3-G3) Wipex sleeve: 1018355 (size G1-G1) 1018356 (size G1 ¼-G1 ¼) 1018357 (size G2-G2) 1018358 (size G3-G3) Wipex flange: 1018359 (size F25/4-85/G1) 1018360 (size F32/4-100/G1 ¼) 1018362 (size F50/4-125/G2) 1018364 (size F80/8-160/G3) Wipex reducer male x female: 1018368 (size G1 ¼-G1) 1018369 (size G1 ½-G1 ¼) 1018371 (size G2-G1) 1018372 (size G2-G1 ¼) 1018374 (size G3-G1) 1018375 (size G3-G1 ¼) 1018376 (size G3-G2) Wipex jointing equal: 1042972 (size 25x2,3-25x2,3) 1042973 (size 32x2,9-32x2,9) 1042980 (size 40x3,7-40x3,7) 1042984 (size 50x4,6-50x4,6) 1042981 (size 63x5,8-63x5,8) 1042985 (size 75x6,8-75x6,8) 1042986 (size 90x8,2-90x8,2) 1042987 (size 110x10-110x10) Wipex swivel union: 1045455 (size G1) 1045456 (size G1 ¼-G1) 1045457 (size G1 ¼) 1045458 (size G2-G1 ¼) 1045459 (size G2) 1045460 (size G3-G2) 1045461 (size G3)

Approval Holder:: Uponor GmbH

Company Name
Uponor GmbH
Address
Industriestrasse 56, Hassfurt
Postcode
97437,
Country
Germany
Phone
0034916853600
General Email
mariaisabel.fernandez@uponor.com

View All Listings by this Company

WRAS Approval Number: #250504018

Range of Instantor Irish Compression Fittings with brass bodies for use with copper pipe to EN1057. Maximum working pressure 16 bar. Maximum operating temperature 99°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250504018
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: SEE MODEL
Marking:: ‘S’ logo on body. Irish Instantor, size, IS/EN1254-2 on nut.
Installation Requirements:: R001
Expiry date:: 31/05/2030
Model:: 310004 Straight Coupler - 1 1/4" 310005 Straight Coupler - 1 1/2" 310006 Straight Coupler - 2" 310042 Reducing Straight Coupler - 1 1/4" X 3/4" 310043 Reducing Straight Coupler - 1 1/4" X 1" 311003 Straight Threaded Coupler - 1" 311004 Straight Threaded Coupler M.I X C - 1 1/4" 311005 Straight Threaded Coupler M.I X C - 1 1/2" 311006 Straight Threaded Coupler M.I X C - 2" 311043 Reducing Straight Threaded Coupler M.I X C - 1 1/4" X 1" 311054 Reducing Straight Threaded Coupler M.I X C - 1 1/2" x" x 1 4 1" 311035 Reducing straight threaded coupler M.I x C 1" x 1 1/2" 311045 Reducing Straight threaded Coupler M.I x C 1 1/4" x 1 1/2" 312004 Straight Threaded coupler F.I x C 1 1/4" 312005 Straight Threaded coupler F.I x C 1 1/2" 312006 Straight Threaded coupler F.I x C 2" 312045 Straight Threaded coupler F.I x C 1 1/4" x 1 1/2" 315004 Elbow CxC 1 1/4" 315005 Elbow CxC 1 1/2" 315006 Elbow CxC 2" 316004 Elbow Threaded M.I 1 1/4" 316005 Elbow Threaded M.I 1 1/2" 316006 Elbow Threaded M.I 2" 317004 Elbow Threaded F.I 1 1/4" 317005 Elbow threaded F.I 1 1/2" 317006 Elbow Threaded F.I 2" 318004 Equal Tee 1 1/4" 318005 Equal Tee 1 1/2" 318006 Equal Tee 2" 318442 Reducing Tee 1 1/4" x 1 1/4" x 3/4" 318443 Reducing Tee 1 1/4" x 1 1/4" x 1" 318553 Reducing Tee 1 1/2" x 1 1/2" x 1" 318554 Reducing Tee 1 1/2" x 1 1/2" X 1 1/4" 310003 Straight Coupler -1" 312003 Straight Threaded coupler F.I x C 1"

Approval Holder:: Sanbra Fyffe Ltd.

Company Name
Sanbra Fyffe Ltd.
Address
Conex Works, Santry Avenue, Dublin
Postcode
D09 K160
Country
Ireland
Phone
353 1 842 6255
General Email
sales@sanbra.ie

View All Listings by this Company

WRAS Approval Number: #250402066

FLOWTECH range of fusion welded, PP-RCT fittings for use with Atlas PP-RCTGF pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250402066
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 20mm – 110mm - FOR INDIVIDUAL SIZE SEE MODEL
Marking:: 'FLOWTECH UAE, PN-25, PP-RCT & size on fitting. Modern Plastic Industry, Flowtech & technical information on pipe.
Installation Requirements:: R001
Expiry date:: 30/04/2030
Model:: Model Code (Size): 90° Elbow FCTE9020 (20mm) FCTE9025 (25mm) FCTE9032 (32mm) FCTE9040 (40mm) FCTE9050 (50mm) FCTE9063 (63mm) FCTE9075 (75mm) FCTE9090 (90mm) FCTE90110 (110mm) 45° Elbow FCTE4520 (20mm) FCTE4525 (25mm) FCTE4532 (32mm) FCTE4540 (40mm) FCTE4550 (50mm) FCTE4563 (63mm) FCTE4575 (75mm) FCTE4590 (90mm) FCTE45110 (110mm) Tee: FCTT20 (20mm) FCTT25 (25mm) FCTT32 (32mm) FCTT40 (40mm) FCTT50 (50mm) FCTT63 (63mm) FCTT75 (75mm) FCTT90 (90mm) FCTT110 (110mm) Socket: FCTS20 (20mm) FCTS25 (25mm) FCTS32 (32mm) FCTS40 (40mm) FCTS50 (50mm) FCTS63 (63mm) FCTS75 (75mm) FCTS90 (90mm) FCTS110 (110mm) End Plug: FCTEC20 (20mm) FCTEC25 (25mm) FCTEC32 (32mm) FCTEC40 (40mm) FCTEC50 (50mm) FCTEC63 (63mm) FCTEC75 (75mm) FCTEC90 (90mm) FCTEC110 (110mm) Reducing Tee: FCTRT20X25X20 (20mm x 25mm x 20mm) FCTRT25X20X20 (25mm x 20mm x 20mm) FCTRT25X20 (25mm x 20mm x 25mm) FCTRT32X20 (32mm x 20mm x 32mm) FCTRT25X32 (32mm x 25mm x 25mm) FCTRT32X25 (32mm x 25mm x 32mm) FCTRT40X20 (40mm x 20mm x 40mm) FCTRT40X25 (40mm x 25mm x 40mm) FCTRT40X32 (40mm x 32mm x 40mm) FCTRT50X20 (50mm x 20mm x 50mm) FCTRT50X25 (50mm x 25mm x 50mm) FCTRT50X32 (50mm x 32mm x 50mm) FCTRT50X40 (50mm x 40mm x 50mm) FCTRT63X20 (63mm x 20mm x 63mm) FCTRT63X25 (63mm x 25mm x 63mm) FCTRT63X32 (63mm x 32mm x 63mm) FCTRT63X40 (63mm x 40mm x 63mm) FCTRT63X50 (63mm x 50mm x 63mm) FCTRT75X32 (75mm x 32mm x 75mm) FCTRT75X40 (75mm x 40mm x 75mm) FCTRT75X50 (75mm x 50mm x 75mm) FCTRT75X63 (75mm x 63mm x 75mm) FCTRT90X40 (90mm x 40mm x 90mm) FCTRT90X50 (90mm x 50mm x 90mm) FCTRT90X63 (90mm x 63mm x 90mm) FCTRT90X75 (90mm x 75mm x 90mm) FCTRT110X63 (110mm x 63mm x 110mm) FCTRT110X75 (110mm x 75mm x 110mm) FCTRT110X90 (110mm x 90mm x 110mm) Reducer: FCTR25X20 (25mm x 20mm FCTR32X20 (32mm x 20mm) FCTR32X25 (32mm x 25mm) FCTR40X20 (40mm x 20mm) FCTR40X25 (40mm x 25mm) FCTR40X32 (40mm x 32mm) FCTR50X20 (50mm x 20mm) FCTR50X25 (50mm x 25mm) FCTR50X32 (50mm x 32mm) FCTR50X40 (50mm x 40mm) FCTR63X20 (63mm x 20mm) FCTR63X25 (63mm x 25mm) FCTR63X32 (63mm x 32mm) FCTR63X40 (63mm x 40mm) FCTR63X50 (63mm x 50mm) FCTR75X40 (75mm x 40mm) FCTR75X50 (75mm x 50mm) FCTR75X63 (75mm x 63mm) FCTR90X50 (90mm x 50mm) FCTR90X63 (90mm x 63mm) FCTR90X75 (90mm x 75mm) FCTR110X63 (110mm x 63mm) FCTR110X75 (110mm x 75mm) FCTR110X90 (110mm x 90mm) End Plug - BSP(M): FCTEP0.5 (1/2" BSP(M)) FCTEP0.75 (3/4" BSP(M)) FCTEP1 (1" BSP(M)) Cross Tee: FCTCT20 (20mm) FCTCT25 (25mm) FCTCT32 (32mm) Union Stub: CTUS20 (20mm) CTUS25 (25mm) CTUS32 (32mm) CTUS40 (40mm) CTUS50 (50mm) CTUS63 (63mm) Pipe Bracket: FCTPB20 (20mm) FCTPB25 (25mm) FCTPB32 (32mm) Cross Over Union: FCTCOS20(20mm) FCTCOS25 (25mm) FCTCOS32 (32mm) Plastic Union: FCTU20 (20mm) FCTU25 (25mm) FCTU32 (32mm) Cross Over Small: FCTCO20 (20mm) FCTCO25 (25mm FCTCO32 £"mm) Flange Stub: FCTST63 (63mm) FCTST75 (75mm) FCTST90 (90mm) FCTST110 (110mm) End Plug: FCTEPL0.5 (1/2'' BSP (M)) FCTEPL0.75 (3/4’' BSP (M)) Female Tee Transition: FCTFT20X0.5 (20mm x 1/2" BSP (F)) FCTFT20X0.75 (20mm x 3/4" BSP (F)) FCTFT25X0.5 (25mm x 1/2" BSP (F)) FCTFT25X0.75 (25mm x 3/4" BSP (F)) FCTFT32X0.5 (32mm x 1/2" BSP (F)) FCTFT32X0.75 32mm x 3/4" BSP (F)) FCTFT32X1 (32mm x 1" BSP (F)) Female Elbow Transition: FCTFE20X0.5 (20mm x 1/2’’ BSP (F)) FCTFE20X0.75 (20mm x 3/4" BSP (F)) FCTFE25X0.5 (25mm x 1/2" BSP (F)) FCTFE25X0.75 (25mm x 3/4" BSP (F)) FCTFE32X0.5 (32mm x 1/2" BSP (F)) FCTFE32X0.75 (32mm x 3/4" BSP (F)) FCTFE32X1 (32mm x 1" BSP (F)) Female Socket Transition: FCTFS20X0.5 (20mm x 1/2’’ BSP (F)) FCTFS20X0.75 (20mm x 3/4" BSP (F)) FCTFS25X0.5 (25mm x 1/2" BSP (F)) FCTFS25X0.75 (25mm x 3/4" BSP (F)) FCTFS32X0.5 (32mm x 1/2" BSP (F)) FCTFS32X0.75 (32mm x 3/4" BSP (F)) Female Hex Socket Transition: FCTFHS32X1 (32mm x 1" BSP (F)) FCTFHS40X1 (40mm x 1’’ BSP (F)) FCTFHS40X1.25 (40mm x 1.1/4’’ BSP (F)) FCTFHS50X1.5 (50mm x 1.1/2’’ BSP (F)) FCTFHS63X2 (63mm x 2’’ BSP (F)) FCTFHS75X2.5 (75mm x 2.1/2’’ BSP (F)) FCTFHS90X3 (90mm x 3’’ BSP (F)) FCTFHS110X4 (110mm x 4’’ BSP (F)) Male Socket Transition: FCTMS20X0.5 (20mm x 1/2’’ BSP (M)) FCTMS20X0.75 (20mm x 3/4" BSP (M)) FCTMS25X0.5 (25mm x 1/2" BSP (M)) FCTMS25X0.75 (25mm x 3/4" BSP (M)) FCTMS32X0.5 (32mm x 1/2" BSP (M)) FCTMS32X0.75 (32mm x 3/4" BSP (M)) Male Hex Socket Transition: FCTMHS32X1 (32mm x 1" BSP (M)) FCTMHS40X1 (40mm x 1’’ BSP (M)) FCTMHS40X1.25 (40mm x 1.1/4’’ BSP (M)) FCTMHS50X1.5 (50mm x 1.1/2’’ BSP (M)) FCTMHS63X2 (63mm x 2’’ BSP (M)) FCTMHS75X2.5 (75mm x 2.1/2’’ BSP (M)) FCTMHS90X3 (90mm x 3’’ BSP (M)) FCTMHS110X4 (110mm x 4’’ BSP (M)) Male Elbow Transition: FCTME20X0.5 (20mm x 1/2’’ BSP (M)) FCTME20X0.75 (20mm x 3/4" BSP (M)) FCTME25X0.5 (25mm x 1/2" BSP (M)) FCTME25X0.75 (25mm x 3/4" BSP (M)) FCTME32X0.5 (32mm x 1/2" BSP (M)) FCTME32X0.75 (32mm x 3/4" BSP (M)) FCTME32X1 (32mm x 1" BSP (M)) Pipe: FCTGF20X2.8 SD7.4 (20mm OD x 2.8mm thickness) FCTGF25X3.5 SD7.4 (25mm OD x 3.5mm thickness) FCTGF32X4.4 SD7.4 (32mm OD x 4.4mm thickness) FCTGF40X5.5 SD7.4 (40mm OD x 5.5mm thickness) FCTGF50X6.9 SD7.4 (50mm OD x 6.9mm thickness) FCTGF63X8.6 SD7.4 (63mm OD x 8.6mm thickness) FCTGF75X10.3 SD7.4 (75mm OD x 10.3mm thickness) FCTGF90X12.3 SD7.4 (90mm OD x 12.3mm thickness) FCTGF110X15.1 SD7.4 (110mm OD x 15.1mm thickness)

Approval Holder:: Modern Plastic Industry LLC

Company Name
Modern Plastic Industry LLC
Address
Dubai Investment Park, PO Box No. 31550, Dubai
Country
United Arab Emirates

View All Listings by this Company

WRAS Approval Number: #250615009

‘GM50xx’ range of stainless steel (SS304 or SS316L) press-fit fittings incorporating EPDM ‘O’-rings for use with *- STPT304 and *- STPT316 stainless steel pipes. The GM5004 prefix models also incorporates an EPDM gasket on the union nut. Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250615009
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15 - 108mm. ½” - 3” BSP (M). ½” - 2” BSP (F).
Marking:: Kasinpress (brand of WENZHOU KASIN VALVE PIPE FITTING CO., LTD), size, WRAS and material grade on fitting body. WRAS, Kasinpress (brand of WENZHOU KASIN VALVE PIPE FITTING CO., LTD), size, material grade, EN10312 and date of manufacture (YYYY/MM) on pipe.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Adapter 90 with female thread: GM5016-1505: 15×Rp½. GM5016-1805: 18×Rp½. GM5016-22075: 22×Rp¾. Adapter with female thread: GM5002-1505: 15×Rp½. GM5002-1805: 18×Rp½. GM5002-22075: 22×Rp¾. GM5002-281: 28×Rp1. GM5002-351025: 35×Rp1¼. GM5002-42105: 42×Rp1½. GM5002-542: 54×Rp2. Bridge with plain ending: GM5035-18: 18. GM5035-22: 22. GM5035-28: 28. Cap: GM5024-15: 15. GM5024-18: 18. GM5024-22: 22. GM5024-28: 28. GM5024-35: 35. GM5024-42: 42. GM5024-54: 54. GM5024-76: 76.1. GM5024-89: 88.9. GM5024-108: 108. Elbow 45 with press ending: GM5008-15: 15. GM5008-18: 18. GM5008-22: 22. GM5008-28: 28. GM5008-35: 35. GM5008-42: 42. GM5008-54: 54. GM5008-76: 76.1. GM5008-89: 88.9. GM5008-108: 108. Elbow 45 with plain ending: GM5009-15: 15. GM5009-18: 18. GM5009-22: 22. GM5009-28: 28. GM5009-35: 35. GM5009-42: 42. GM5009-54: 54. GM5009-76: 76.1. GM5009-89: 88.9. GM5009-108: 108. Elbow 90 with press ending: GM5006-15: 15. GM5006-18: 18. GM5006-22: 22. GM5006-28: 28. GM5006-35: 35. GM5006-42: 42. GM5006-54: 54. GM5006-67: 66.7. GM5006-76: 76.1. GM5006-89: 88.9. GM5006-108 -108. Elbow 90 with female thread: GM5021-1505: 15×Rp½. GM5021-1805: 18×Rp½. GM5021-22075: 22×Rp¾. GM5021-281: 28×Rp1. GM5021-351024: 35×Rp1¼. GM5021-42105: 42×Rp1½. GM5021-542: 54×Rp2. Elbow: 90 with: male thread: GM5010-1505: 15×R½. GM5010-1805: 18×R½. GM5010-22075: 22×R¾ Elbow 90 with plain ending: GM5007-15: 15. GM5007-18: 18. GM5007-22: 22. GM5007-28: 28. GM5007-35: 35. GM5007-42: 42. GM5007-54: 54. GM5007-76: 76.1. GM5007-89: 88.9. GM5007-108: 108. Reducer coupling with plain ending: GM5005-1815: 18×15. GM5005-2218: 22×18. GM5005-2818: 28×18. GM5005-3522: 35×22. GM5005-3528: 35×28. GM5005-4222: 42×22. GM5005-4228: 42×28. GM5005-4235: 42×35. GM5005-5428: 54×28. GM5005-5435: 54×35. GM5005-5442: 54×42. Reducer coupling with press ending: GM5011-1815: 18×15. GM5011-2215: 22×15. GM5011-2218: 22×18. GM5011-2815: 28×15. GM5011-2818: 28×18. GM5011-2822: 28×22. GM5011-3515: 35×15. GM5011-3518: 35×18. GM5011-3522: 35×22. GM5011-3528: 35×28. GM5011-4215: 42×15. GM5011-4218: 42×18. GM5011-4222: 42×22. GM5011-4228: 42×28. GM5011-4235: 42×35. GM5011-5415: 54×15. GM5011-5418: 54×18. GM5011-5422: 54×22. GM5011-5428: 54×28. GM5011-5435: 54×35. GM5011-5442: 54×42. GM5011-6735: 66.7×35. GM5011-6754: 66.7×54. GM5011-7654: 76.1×54. GM5011-8954: 88.9×54. GM5011-8976: 88.9×76.1. GM5011-10854: 108×54. GM5011-10876: 108×76.1. GM5011-10889: 108×88.9. Reducer Tee with press ending: GM5015-1815: 18×15×18. GM5015-2215: 22×15×22. GM5015-2218: 22×18×22. GM5015-2815: 28×15×28. GM5015-2818: 28×18×28. GM5015-2822: 28×22×28. GM5015-3522: 35×22×35. GM5015-3528: 35×28×35. GM5015-4222: 42×22×42. GM5015-4228: 42×28×42. GM5015-4235: 42×35×42. GM5015-5422: 54×22×54. GM5015-5428: 54×28×54. GM5015-5435: 54×35×54. GM5015-5442: 54×42×54. GM5015-7642: 76.1×42×76.1. GM5015-7654: 76.1×54×76.1. GM5015-8954: 88.9×54×88.9 GM5015-10854: 108×54×108. GM5015-10876: 108×76.1×108. GM5015-10889: 108×88.9×108 Equal coupling with press ending: GM5001-15: 15. GM5001-18: 18. GM5001-22: 22 GM5001-28: 28. GM5001-35: 35. GM5001-42: 42. GM5001-54: 54. GM5001-67: 66.7. GM5001-76: 76.1. GM5001-89: 88.9. GM5001-108: 108 Adapter with male thread: GM5003-1505: 15×R½. GM5003-1805: 18×R½. GM5003-18075: 18×R¾. GM5003-2205: 22×R½. GM5003-22075: 22×R¾. GM5003-281: 28×R1. GM5003-351025: 35×R1¼. GM5003-42105: 42×R1½. GM5003-542: 54×R2. GM5003-76205: 76.1×R2½. GM5003-893: 88.9×R3. Slip coupling with press ending: GM5019-15: 15. GM5019-18: 18. GM5019-22: 22. GM5019-28: 28. GM5019-35: 35. GM5019-42: 42 GM5019-54: 54. Tee with press ending: GM5012-15: 15. GM5012-18: 18. GM5012-22: 22. GM5012-28: 28. GM5012-35: 35. GM5012-42: 42. GM5012-54: 54. GM5012-76: 76.1. GM5012-89: 88.9. GM5012-108: 108. Tee with male thread: GM5013-1505: 15×R½. GM5013-1805: 18×R½. GM5013-2205: 22×R½. GM5013-22075: 22×R¾. GM5013-2805: 28×R½. GM5013-28075: 28×R¾. GM5013-281: 28×R1. GM5013-3505: 35×R½. GM5013-351025: 35×R1¼. GM5013-421025: 42×R1¼. GM5013-54105: 54×R1½. GM5013-542: 54×R2. Tee with female thread:: GM5014-1505: 15×Rp½. GM5014-1805: 18×Rp½. GM5014-2205: 22×Rp½. GM5014-22075: 22×Rp¾. GM5014-2805: 28×R½. GM5014-28075: 28×Rp¾. GM5014-281: 28×Rp1. GM5014-3505: 35×Rp½. GM5014-351025: 35×Rp1¼. GM5014-421025: 42×Rp1¼. GM5014-54105: 54×1½. GM5014-542: 54×Rp2. Adaptor with union nut: GM5004-1505: 15×G½. GM5004-1805: 18×G½. GM5004-18075: 18×G¾. GM5004-2205: 22×G½. GM5004-22075: 22×G¾. GM5004-221: 22×G1. GM5004-281: 28×G1. GM5004-351025: 35×G1¼. GM5004-421075: 42×G1¾. GM5004-542: 54×G2. Stainless steel pipe (SS304 or SS316L): *- STPT304 (SS304). *- STPT316L (SS316L). Where * = size in mm between 15 and 108 (in whole numbers: 15, 18, 22, 28, 35, 42, 54, 66.7, 76.1, 88.9, 108).

Product Images

Approval Holder:: WENZHOU KASIN VALVE PIPE FITTING CO., LTD

Company Name
WENZHOU KASIN VALVE PIPE FITTING CO., LTD
Address
NO.2‐1802 Caizhi Building, No. 88, Binhang Road, Yongzhong Sub‐District, Longwan District, Wenzhou, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #250604019

Range of stainless-steel press fittings with EPDM ‘O’-rings for use with stainless-steel pipe to EN10312. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250604019
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: GD Press, size, 304L, model number on body.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Coupling GDC5001 OD15 GDC5002 OD18 GDC5003 OD22 GDC5004 OD28 GDC5005 OD35 GDC5006 OD42 GDC5007 OD54 GDC6501 OD66.7 GDC5008 OD76.1 GDC5009 OD88.9 GDC5010 OD108 Long Coupling GDC5011 OD15 GDC5012 OD18 GDC5013 OD22 GDC5014 OD28 GDC5015 OD35 GDC5016 OD42 GDC5017 OD54 GDC6502 OD66.7 GDC5018 OD76.1 GDC5019 OD88.9 GDC5020 OD108 Reducer with Plain End GDC5021 OD18×OD15 GDC5022 OD22×OD15 GDC5023 OD22×OD18 GDC5024 OD28×OD15 GDC5025 OD28×OD18 GDC5026 OD28×OD22 GDC5048 OD35×OD15 GDC5027 OD35×OD18 GDC5029 OD35×OD22 GDC5030 OD35×OD28 GDC5031 OD42×OD15 GDC5032 OD42×OD18 GDC5033 OD42×OD22 GDC5034 OD42×OD28 GDC5035 OD42×OD35 GDC5036 OD54×OD15 GDC5037 OD54×OD18 GDC5038 OD54×OD22 GDC5039 OD54×OD28 GDC5040 OD54×OD35 GDC5041 OD54×OD42 GDC6503 OD66.7×OD42 GDC6504 OD66.7×OD54 GDC5028 OD76.1×OD42 GDC5042 OD76.1×OD54 GDC6505 OD76.1×OD66.7 GDC5049 OD88.9×OD42 GDC5043 OD88.9×OD54 GDC6506 OD88.9×OD66.7 GDC5044 OD88.9×OD76.1 GDC5045 OD108×OD54 GDC6507 OD108×OD66.7 GDC5046 OD108×OD76.1 GDC5047 OD108×OD88.9 90° Elbow GDC6051 OD15 GDC6052 OD18 GDC6053 OD22 GDC6054 OD28 GDC6055 OD35 GDC6056 OD42 GDC6057 OD54 GDC6511 OD66.7 GDC6058 OD76.1 GDC6059 OD88.9 GDC6060 OD108 90° Elbow with Plain End GDC6071 OD15 GDC6072 OD18 GDC6073 OD22 GDC6074 OD28 GDC6075 OD35 GDC6076 OD42 GDC6077 OD54 GDC6512 OD66.7 GDC6078 OD76.1 GDC6079 OD88.9 GDC6080 OD108 45° Elbow GDC6101 OD15 GDC6102 OD18 GDC6103 OD22 GDC6104 OD28 GDC6105 OD35 GDC6106 OD42 GDC6107 OD54 GDC6513 OD66.7 GDC6108 OD76.1 GDC6109 OD88.9 GDC6110 OD108 45° Elbow with Plain End GDC6121 OD15 GDC6122 OD18 GDC6123 OD22 GDC6124 OD28 GDC6125 OD35 GDC6126 OD42 GDC6127 OD54 GDC6514 OD66.7 GDC6128 OD76.1 GDC6129 OD88.9 GDC6130 OD108 Tee GDC5181 OD15 GDC5182 OD18 GDC5183 OD22 GDC5184 OD28 GDC5185 OD35 GDC5186 OD42 GDC5187 OD54 GDC6515 OD66.7 GDC5188 OD76.1 GDC5189 OD88.9 GDC5190 OD108 Reducing Tee GDC5191 OD18×OD15 GDC5192 OD22×OD15 GDC5193 OD22×OD18 GDC5194 OD28×OD15 GDC5195 OD28×OD18 GDC5196 OD28×OD22 GDC5197 OD35×OD15 GDC5198 OD35×OD18 GDC5199 OD35×OD22 GDC5200 OD35×OD28 GDC5201 OD42×OD15 GDC5202 OD42×OD18 GDC5203 OD42×OD22 GDC5204 OD42×OD28 GDC5205 OD42×OD35 GDC5206 OD54×OD15 GDC5207 OD54×OD18 GDC5208 OD54×OD22 GDC5209 OD54×OD28 GDC5210 OD54×OD35 GDC5211 OD54×OD42 GDC6517 OD66.7×OD22 GDC6518 OD66.7×OD28 GDC6519 OD66.7×OD35 GDC6520 OD66.7×OD42 GDC6521 OD66.7×OD54 GDC5212 OD76.1×OD22 GDC5213 OD76.1×OD28 GDC5214 OD76.1×OD35 GDC5215 OD76.1×OD42 GDC5216 OD76.1×OD54 GDC6522 OD76.1×OD66.7 GDC5217 OD88.9×OD22 GDC5218 OD88.9×OD28 GDC5219 OD88.9×OD35 GDC5220 OD88.9×OD42 GDC5221 OD88.9×OD54 GDC6523 OD88.9×OD66.7 GDC5222 OD88.9×OD76.1 GDC5223 OD108×OD22 GDC5224 OD108×OD28 GDC5225 OD108×OD35 GDC5226 OD108×OD42 GDC5227 OD108×OD54 GDC6524 OD108×OD66.7 GDC5228 OD108×OD76.1 GDC5229 OD108×OD88.9 Tee with Male Thread End GDC5231 OD15×R1/2 GDC5232 OD18×R1/2 GDC5239 OD22×R1/2 GDC5233 OD22×R3/4 GDC5234 OD22×R1 GDC5240 OD28×R1/2 GDC5283 OD28×R3/4 GDC5235 OD28×R1 GDC5281 OD35×Rp3/4 GDC5236 OD35×Rp1 1/4 GDC5237 OD42×Rp1 1/2 GDC5282 OD54×Rp1/2 GDC5238 OD54×Rp2 Tee with Female Thread End GDC5241 OD15×Rp1/2 GDC5242 OD18×Rp1/2 GDC5243 OD18×Rp3/4 GDC5244 OD22×Rp1/2 GDC5245 OD22×Rp3/4 GDC5246 OD28×Rp1/2 GDC5247 OD28×Rp3/4 GDC5248 OD28×Rp1 GDC5249 OD35×Rp1/2 GDC5250 OD35×Rp3/4 GDC5262 OD35×Rp1 GDC5263 OD35×Rp1 1/4 GDC5251 OD42×Rp1/2 GDC5252 OD42×Rp3/4 GDC5264 OD42×Rp1 GDC5265 OD42×Rp1 1/2 GDC5253 OD54×Rp1/2 GDC5254 OD54×Rp3/4 GDC5266 OD54×Rp1 GDC5255 OD54×Rp2 GDC6531 OD66.7×Rp1/2 GDC6532 OD66.7×Rp3/4 GDC6533 OD66.7×Rp1 1/2 GDC5256 OD76.1×Rp3/4 GDC5257 OD76.1×Rp2 GDC5258 OD88.9×Rp3/4 GDC5259 OD88.9×Rp2 GDC5260 OD108×Rp3/4 GDC5261 OD108×Rp2 Adaptor with Male Thread End GDC5360 OD15×R3/8 GDC5361 OD15×R1/2 GDC5362 OD15×R3/4 GDC5363 OD18×R1/2 GDC5364 OD18×R3/4 GDC5365 OD22×R1/2 GDC5366 OD22×R3/4 GDC5367 OD22×R1 GDC5368 OD28×R3/4 GDC5369 OD28×R1 GDC5370 OD28×R1 1/4 GDC5371 OD35×R1 GDC5372 OD35×R1 1/4 GDC5373 OD35×R1 1/2 GDC5374 OD42×R1 1/4 GDC5375 OD42×R1 1/2 GDC5376 OD54×R1 1/2 GDC5377 OD54×R2 GDC6541 OD66.7×R2 1/2 GDC5378 OD76.1×R2 1/2 GDC5379 OD88.9×R3 GDC5380 OD108×R4 Adaptor with Female Thread End GDC5381 OD15×Rp1/2 GDC5382 OD15×Rp3/4 GDC5383 OD18×Rp1/2 GDC5384 OD18×Rp3/4 GDC5385 OD22×Rp1/2 GDC5386 OD22×Rp3/4 GDC5387 OD22×Rp1 GDC5388 OD28×Rp3/4 GDC5389 OD28×Rp1 GDC5390 OD28×Rp1 1/4 GDC5391 OD35×Rp1 GDC5392 OD35×Rp1 1/4 GDC5393 OD35×Rp1 1/2 GDC5394 OD42×Rp1 1/4 GDC5395 OD42×Rp1 1/2 GDC5396 OD54×Rp1 1/2 GDC5397 OD54×Rp2 GDC6542 OD66.7×Rp2 1/2 GDC5398 OD76.1×Rp2 1/2 GDC5399 OD88.9×Rp3 GDC5400 OD108×Rp4 Cap GDC5421 OD15 GDC5422 OD18 GDC5423 OD22 GDC5424 OD28 GDC5425 OD35 GDC5426 OD42 GDC5427 OD54 GDC6542 OD66.7 GDC5428 OD76.1 GDC5429 OD88.9 GDC5430 OD108 Adaptor with Union Nut GDC5341 OD15×G1/2 GDC5353 OD15×G3/4 GDC5342 OD18×G1/2 GDC5343 OD18×G3/4 GDC5345 OD22×G1 GDC5347 OD28×G1 GDC5348 OD28×G1 1/4 GDC5359 OD35×G1 1/4 GDC5350 OD35×G1 1/2 GDC5351 OD42×G1 3/4 GDC5346 OD42×G1 1/2 GDC5356 OD54×G2 GDC5352 OD54×G2 3/8 Adaptor with Union with Female thread GDC5451 OD15×Rp1/2 GDC5452 OD15×Rp3/4 GDC5453 OD18×Rp1/2 GDC5454 OD18×Rp3/4 GDC5455 OD22×Rp3/4 GDC5456 OD22×Rp1 GDC5457 OD28×Rp1 GDC5458 OD35×Rp1 1/4 GDC5459 OD42×Rp1 1/2 GDC5460 OD54×Rp2 Adaptor Union with Male Thread GDC5431 OD15×R1/2 GDC5432 OD15×R3/4 GDC5433 OD18×R1/2 GDC5434 OD18×R3/4 GDC5435 OD22×R1/2 GDC5436 OD22×R3/4 GDC5437 OD22×R1 GDC5438 OD28×R1 GDC5439 OD35×R1 1/4 GDC5440 OD42×R1 1/2 GDC5441 OD54×R2 Adaptor Union GDC5471 OD15 GDC5472 OD18 GDC5473 OD22 GDC5474 OD28 GDC5475 OD35 GDC5476 OD42 GDC5477 OD54 Flange with Pressing Socket GDC5301 OD15 GDC5302 OD18 GDC5303 OD22 GDC5304 OD28 GDC5305 OD35 GDC5306 OD42 GDC5307 OD54 GDC6536 OD66.7 GDC5308 OD76.1 GDC5309 OD88.9 GDC5310 OD108

Approval Holder:: Grande-tek Flow Control Co., Ltd

Company Name
Grande-tek Flow Control Co., Ltd
Address
Industrial Zone of Yunhe District, Fuyang Road, Cangzhou, Hebei
Postcode
061000
Country
China

View All Listings by this Company

WRAS Approval Number: #250604025

‘Uponor Q&E’ range of brass press-fit fittings for use with PE-Xa-PE-PE ‘Uponor Aqua Pipe AU’ multi-layered pipes. Maximum operating pressure 10 bar. Maximum operating temperature 70°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250604025
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 16mm – 25mm, ½” – 1”.
Marking:: Pipe - Uponor, size, PN, temperature, SDR & PE-Xa. Fittings - Uponor logo, size and other technical information.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Uponor Aqua Pipe AU 3-layer pipes: 1126786 - Uponor Aqua Pipe AU 16x2,2 100 mt, 1126787 - Uponor Aqua Pipe AU 20x2,8 100 mt, 1126788 - Uponor Aqua Pipe AU 25x3,5 50mt. Brass fittings: Uponor Q&E Coupling LL: 1126789 - 16x16, 1126790 - 20x20, 1126791 - 25x25. Uponor Q&E Reducer LL: 1126792 - 20x16, 1126793 - 25x16, 1126794 - 25x20. Uponor Q&E Elbow LL: 1126795 - 16x16, 1126796 - 20x20, 1126797 - 25x25. Uponor Q&E Tee LL: 1126798 - 16x16x16, 1126799 - 20x20x20, 1126800 - 25x25x25. Uponor Q&E Tee Reducer LL: 1126801 - 16x20x16, 1126802 - 20x16x16, 1126803 - 20x16x20, 1126804 - 20x20x16, 1126805 - 25x16x25, 1126806 - 25x20x25. Uponor Q&E Plug LL: 1126807 - 16, 1126808 - 20. Uponor Q&E Adapter Female LL: 1126809 - 16-Rp1/2", 1126810 - 20-Rp1/2", 1126811 - 20-Rp3/4", 1126812 - 20-Rp1", 1126813 - 25-Rp1". Uponor Q&E Adapter Male LL: 1126814 - 16-R1/2", 1126815 - 16-R3/4", 1126816 - 20-R1/2", 1126817 - 20-R3/4", 1126818 - 20-R1", 1126819 - 25-R3/4", 1126820 - 25-R1". Uponor Q&E Adapter Swivel Nut: 1126821 - 16-1/2", 1126822 - 20-1/2", 1126823 - 20-3/4", 1126824 - 25-3/4", 1126825 - 25-1". Uponor Q&E Elbow Swivel Nut: 1126826 - 16-1/2", 1126827 - 20-1/2". Uponor Q&E Tap Elbow LL: 1126828 - 16-1/2", 1126829 - 20-1/2", 1126830 - 20-3/4". Uponor Q&E Elbow Adapter Male LL: 1126831 - 16-G1/2", 1126832 - 20-G1/2", 1126833 - 20-R1/2", 1126834 - 20-G3/4", 1126871 - 25-G3/4". Uponor Q&E Elbow Adapter Female LL: 1126835 - 16-1/2", 1126836 - 20-3/4", 1126837 - 25-3/4". Uponor Q&E Tee female LL: 1126838 - 25-1/2"-25, 1126839 - 25-3/4"-25. Uponor Q&E BP-Elbow LL: 1126841 - 16-1/2" MT L = 65 MM, 1126842 - 16-1/2" MT L = 90 MM, 1126843 - 16-1/2" MT L = 175 MM, 1126844 - 16-1/2" MT L = 200 MM, 1126845 - 20-1/2"MT L = 95 MM, 1126846 - 20-1/2"MT L = 200 MM, 1126847 - 20-3/4" MT L = 100 MM. Uponor Q&E Brass Adapter LL: 1126848 - 16-15 CU, 1126849 - 20-15 CU, 1126850 - 20-3/4" CU, 1126851 - 25-1" CU. Uponor Q&E Brass Adapter LL PRESS: 1126852 - 16-1/2" CU, 1126853 - 20-3/4" CU, 1126854 - 25-1" CU. Uponor Q&E adapter male thread PL: 1023003 - 16-R1/2"MT, 1023005 - 20-R1/2"MT, 1023007 - 25-R3/4"MT. Uponor Smart Aqua tap elbow term. box Q&E UP PL: 1047935 - 16-Rp1/2"FT. Uponor Smart Aqua tap elbow term. box Q&E SP PL: 1047932 - 20-Rp1/2"FT, 1047933 - 25-Rp3/4"FT.

Approval Holder:: Uponor GmbH

Company Name
Uponor GmbH
Address
Industriestrasse 56, Hassfurt
Postcode
97437,
Country
Germany
Phone
0034916853600
General Email
mariaisabel.fernandez@uponor.com

View All Listings by this Company

WRAS Approval Number: #2304380

U Profile range of press fittings incorporating EPDM ‘O’-rings. For use with MONFLEX PEXB/AL/PEXB MULTILAYER PIPES. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2304380
Size:: 16-32mm. BSP threaded connections: ½” - 1½” (M) or (F).
Marking:: Fitting: Ebrille & size Pipe: Ebrille and product info on pipe.
Installation Requirements:: R001
Expiry date:: 30/04/2028
Model:: EBRILLE 'U' FITTINGS Straight: REM16X16 REM18X18 REM20X20 REM25X25 REM32X32 Reduced straight: REMR20X16 REMR20X18 REMR25X16 REMR25X18 REMR25X20 REMR26X16 REMR26X18 REMR26X20 REMR32X16 REMR32X18 REMR32X20 REMR32X25 REMR32X26 Male straight: REDFM16X1/2 REDFM16X3/4 REDFM18X1/2 REDFM20X1/2 REDFM20X1 REDFM25X1/2 REDFM25X3/4 REDFM25X1 REDFM26X1/2 REDFM26X3/4 REDFM26X1 REDFM32X1/2 REDFM32X3/4 REDFM32X1 REDFM32X11/4 REDFM32X11/2 Female straight: REDFF16X1/2 REDFF16X3/4 REDFF16X1 REDFF18X1/2 REDFF18X3/4 REDFF20X1/2 REDFF20X3/4 REDFF20X1 REDFF25X1/2 REDFF25X3/4 REDFF25X1 REDFF26X1/2 REDFF26X3/4 REDFF26X1 REDFF32X1/2 REDFF32X3/4 REDFF32X1 REDFF32X11/4 REDFF32X11/2 Elbow: RE90°16X16 RE90°18X18 RE90°20X20 RE90°25X25 RE90°26X26 RE90°32X32 Male elbow: RE90°FM16X1/2 RE90°FM16X3/4 RE90°FM18X1/2 RE90°FM18X3/4 RE90°FM20X1/2 RE90°FM20X3/4 RE90°FM20X1 RE90°FM25X1/2 RE90°FM25X3/4 RE90°FM25X1 RE90°FM26X1/2 RE90°FM26X3/4 RE90°FM26X1 RE90°FM32X1/2 RE90°FM32X3/4 RE90°FM32X1 RE90°FM32X11/4 Female elbow: RE90°FF16X1/2 RE90°FF16X3/4 RE90°FF18X1/2 RE90°FF18X3/4 RE90°FF20X1/2 RE90°FF20X3/4 RE90°FF20X1 RE90°FF25X1/2 RE90°FF25X3/4 RE90°FF25X1 RE90°FF26X1/2 RE90°FF26X3/4 RE90°FF26X1 RE90°FF32X1/2 RE90°FF32X3/4 RE90°FF32X1 RE90°FF32X1 1/4 Wall plated elbow: RE90°M16X1/2 RE90°M16X3/4 RE90°M18X1/2 RE90°M20X1/2 RE90°M20X3/4 Tee: RET16X16X16 RET18X18X18 RET20X20X20 RET25X25X25 RET26X26X26 RET32X32X32 Reduced tee: RETR16X20X16 RETR16X25X16 RETR16X26X16 RETR18X16X18 RETR18X20X18 RETR18X25X18 RETR18X26X18 RETR20X16X20 RETR20X18X20 RETR20X25X20 RETR25X16X25 RETR25X16X16 RETR26X16X16 RETR25X18X25 RETR25X20X25 RETR25X32X25 RETR20X26X20 RETR26X16X26 RETR26X18X26 RETR26X20X26 RETR26X32X26 RETR32X16X32 RETR32X18X32 RETR32X20X32 RETR32X25X32 RETR25X16X20 RETR32X20X25 RETR26X16X20 RETR32X20X26 RETR20X16X16 RETR20X20X16 RETR25X25X18 RETR25X25X20 RETR25X18X18 RETR25X20X20 RETR25X16X20 RETR32X20X25 RETR26X26X16 RETR26X26X18 RETR26X26X20 RETR26X18X18 RETR26X20X20 RETR26X20X16 RETR32X20X26 RETR32X32X16 RETR32X32X20 RETR32X32X26 RETR32X25X25 RETR32X26X26 RETR32X26X32 Male tee: RETFM16X1/2X16 RETFM16X3/4X16 RETFM20X1/2X20 RETFM20X3/4X20 Female tee: RETFF16X1/2X16 RETFF16X3/4X16 RETFF18X1/2X18 RETFF18X3/4X18 RETFF20X1/2X20 RETFF20X3/4X20 RETFF20X1X20 RETFF25X1/2X25 RETFF25X3/4X25 RETFF25X1X25 RETFF26X1X26 RETFF26X3/4X26 RETFF26X1X26 RETTFF32X1/2X32 RETFF32X3/4X32 RETFF32X1X32 RETFF32X11/4X32 Cap: REC16 REC18 REC20 REC25 REC26 REC32 Female union: REDFFL16X1/2 REDFFL16X3/4 REDFFL20X1/2 REDFFL20X3/4 REDFFL25X1/2 REDFFL25X3/4 REDFFL25X1 REDFFL26X1/2 REDFFL26X3/4 REDFFL26X1 REDFFL32X1 TO BE USED WITH MONOFLEX PEXB/ALPEXB MULTILAYER PIPES: MZ16X2MONFLEXMT100 MZ16X2MONFLEXMT200 MZ16X2MONFLEXMT400 MZ18X2MONFLEXMT100 MZ20X2MONFLEXMT100 MZ20X2MONFLEXMT200 MZ20X2MONFLEXMT400 MZ25X2,5MONFLEXMT100 MZ26X3MONFLEXMT100 MZ32X3MONFLEXMT100

Approval Holder:: Ebrille s.r.l.

Company Name
Ebrille s.r.l.
Address
Administration and Esablishment, Straded Canelli, 53A - 14049 Nizza Monferrato AT
Country
Italy

View All Listings by this Company

WRAS Approval Number: #240404075

Range of press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240404075
Size:: For size see models
Marking:: Valtren logo, size, WRAS and date of manufacture (mm/yy) on body
Installation Requirements:: R001
Expiry date:: 30/04/2029
Model:: STRAIGHT COUPLING CxC: 60111515 60112222 60112828 60113535 60114242 60115454 SLIP COUPLING C x C: 60171515 60172222 60172828 60173535 60174242 60175454 REDUCING COUPLING C x C: 60112215 60112815 60112822 60113515 60113522 60113528 60114215 60114222 60114228 60114235 60115415 60115422 60115428 60115435 60115442 FITTING REDUCER F x C: 60132215 60132815 60132822 60133515 60133522 60133528 60134215 60134222 60134228 60134235 60135415 60135422 60135428 60135435 60135442 90DEG ELBOW C x C: 60411515 60412222 60412828 60413535 60414242 60415454 90DEG STREET ELBOW F x C: 60431515 60432222 60432828 60433535 60434242 60435454 45DEG ELBOW C x C: 60451515 60452222 60452828 60453535 60454242 60455454 45DEG STREET ELBOW F x C: 60481515 60482222 60482828 60483535 60484242 60485454 CAP C x C: 60811515 60812222 60812828 60813535 60814242 60815454 EQUAL TEE C x C: 60151515 60222222 60282828 60353535 60424242 60545454 PART CROSSOVER F x C: 60271515 - 15mm 60272222 - 22mm CROSSOVER C x C: 60291515 - 15mm 60292222 - 22mm REDUCER ELBOW 60412215 - 22mm x 15mm REDUCING TEE: 60221515 60221522 60282222 60282228 60222215 60282815 60282822 60353515 60353522 60353528 60424215 60424222 60424228 60424235 60545415 60545422 60545428 60545435 60545442

Approval Holder:: Valtren Distribution Ltd

Company Name
Valtren Distribution Ltd
Address
10 Aylesbury Court Lapworth
Postcode
B94 6BE
Country
United Kingdom
General Email
07771 755057

View All Listings by this Company