Directory Search Results

Print List

#2307058

Range of flexible tap connector hoses incorporating corrugated stainless steel bodies with a blue or red PE outer sleeve and an EPDM ‘O’-ring and gasket. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
1870 Tubes
Section Subtitle:
Flexible - Metal.
WRAS Approval Number:
2307058
Size:
½” captive nut x M12 (short or long).
Marking:
MSL and batch number (L followed by date of manufacture DDMMYY) on captive nut.
Installation Requirements:
R001
Expiry date:
31/07/2028
Model:
Serpent range: BFFTCBM12LD-450 (Long - Blue - 450mm length), BFFTCRM12SD-450 (Short - Red - 450mm length).
Product Images

Approval Holder:
Navigator MSL Ltd.
Company Name
Navigator MSL Ltd.
Address
Mill Road, Sharnbrook, Beds.
Postcode
MK44 1NP
Phone
01234 781234

View All Listings by this Company

Print This Approval


#2103039

'Hurricane' range of Indirect and direct unvented storage cylinders consisting of factory fitted single or twin coil circuit with either a primary or solar coil. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar@90˚C. The product is supplied with an inlet control group (safety kit) consisting of a pressure reducing valve adjustable between 2.7 and 3.3 bar, strainer, an expansion relief valve set at 6.0 bar and a check valve cartridge (verified by test - suitable for backflow protection against Fluid Category 2). A tundish and expansion vessel are also provided. Maximum supply pressure to the inlet control group 10.0 bar. Maximum working pressures: Secondary circuit 3.0 bar, Primary Circuit 3.0 bar & Solar circuit 5.5 bar. Maximum operating temperature 65°C.

Section:
1890 Unvented Heating Apparatus
Size:
Primary circuit: 1” BSP (F) Secondary circuit: 1” BSP (F) Solar circuit: 1” BSP (F)
Marking:
Hurricane, Telford stainless and technical information including capacity and pressures on adhesive label on body.
Installation Requirements:
R001 R140 R360 R530
Expiry date:
31/03/2026
Model:
HURIXXX - Hurricane indirect single coil unvented cylinder vertical. XXX denotes the capacity in litres, and is replace with any of the following: 090 = 90L 125 = 125L 150 = 150L 170 = 170L 200 = 200L 250 = 250L 300 = 300L 400 = 400L 500 = 500L HURIXXX/S - Hurricane indirect twin coil boiler & solar unvented cylinder vertical. XXX denotes the capacity in litres, and is replace with any of the following: 170 = 170L 200 = 200L 250 = 250L 300 = 300L 400 = 400L 500 = 500L HURIXXX - Hurricane direct electric only unvented cylinder vertical. XXX denotes the capacity in litres, and is replace with any of the following: 090 = 90L 125 = 125L 150 = 150L 170 = 170L 200 = 200L 250 = 250L 300 = 300L

Approval Holder:
Telford Copper & Stainless Cylinders Ltd
Company Name
Telford Copper & Stainless Cylinders Ltd
Address
Unit 22 Furrows Business Park Haybridge Road
Postcode
TF1 2DF
Country
Wellington

View All Listings by this Company

Print This Approval


#2307320

6300E7 series of nickel plated brass manifolds and 6300R8 series of chromium plated brass manifolds with two, three or four outlets, for use with copper pipe (manufactured to EN1057). The products incorporate a screw down isolation valve at each port. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

Section:
1950 Manifolds
Section Subtitle:
Metal.
WRAS Approval Number:
2307320
Size:
¾” BSP (F) x ¾” BSP (M) or 1” BSP (M) x 1” BSP (F).
Marking:
General Fittings on body or cap indice.
Installation Requirements:
R001 R120
Expiry date:
31/07/2028
Model:
6300E7N0505B2A MANIFOLD EK BLU NK 3/4X3/4-T2 6300E7N0505B3A MANIFOLD EK BLU NK 3/4X3/4-T3 6300E7N0505B4A MANIFOLD EK BLU NK 3/4X3/4-T4 6300E7N0505R2A MANIFOLD EK RED NK 3/4X3/4-T2 6300E7N0505R3A MANIFOLD EK RED NK 3/4X3/4-T3 6300E7N0505R4A MANIFOLD EK RED NK 3/4X3/4-T4 6300E7N0505V2A MANIFOLD EK GREEN NK 3/4X3/4-T2 6300E7N0505V3A MANIFOLD EK GREEN NK 3/4X3/4-T3 6300E7N0505V4A MANIFOLD EK GREEN NK 3/4X3/4-T4 6300E7N1005B2A MANIFOLD EK BLU NK 1”X3/4-T2 6300E7N1005B3A MANIFOLD EK BLU NK 1”X3/4-T3 6300E7N1005B4A MANIFOLD EK BLU NK 1”X3/4-T4 6300E7N1005R2A MANIFOLD EK RED NK 1”X3/4-T2 6300E7N1005R3A MANIFOLD EK RED NK 1”X3/4-T3 6300E7N1005R4A MANIFOLD EK RED NK 1”X3/4-T4 6300E7N1005V2A MANIFOLD EK GREEN NK 1”X3/4-T2 6300E7N1005V3A MANIFOLD EK GREEN NK 1”X3/4-T3 6300E7N1005V4A MANIFOLD EK GREEN NK 1”X3/4-T4 6300R8C0505V2A MANIFOLD 90° EK GREEN NK 3/4X3/4-T2 6300R8C0505V3A MANIFOLD 90° EK GREEN NK 3/4X3/4-T3 6300R8C0505V4A MANIFOLD 90° EK GREEN NK 3/4X3/4-T4 6300R8C1005V2A MANIFOLD 90° EK GREEN NK 1”X3/4-T2 6300R8C1005V3A MANIFOLD 90° EK GREEN NK 1”X3/4-T3 6300R8C1005V4A MANIFOLD 90° EK GREEN NK 1”X3/4-T4
Product Images

Approval Holder:
General Fittings S.p.A
Company Name
General Fittings S.p.A
Address
Via Golgi 73/75 25064 Gussago Brescia
Country
Italy
Phone
+39 0303739017

View All Listings by this Company
Manufacturer:
General Fittings S.p.A
Company Name
General Fittings S.p.A
Address
Via Golgi 73/75 25064 Gussago Brescia
Country
Italy
Phone
+39 0303739017

View All Listings by this Company

Print This Approval


#2307033

Range of air release valves with blue epoxy coated ductile iron bodies, EPDM O-rings, seats and stainless-steel floats. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 80°C

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2307033
Size:
DN50, DN80, DN100, DN150 & DN200 - flanged.
Marking:
SPS, size, PN, Model no, Serial no and year of manufacture (YYYY) on data plate on body. SPS, size, PN and year of manufacture (YYYY) on body.
Installation Requirements:
R001
Expiry date:
31/07/2028
Model:
AIF-118.
Product Images

Approval Holder:
Saudi Pipe Systems Co. Ltd.
Company Name
Saudi Pipe Systems Co. Ltd.
Address
Industrial Zone Phase #4, PO Box 34572, Jeddah, Makkah 21478
Country
Saudi Arabia

View All Listings by this Company
Manufacturer:
Saudi Pipe Systems Co. Ltd.
Company Name
Saudi Pipe Systems Co. Ltd.
Address
Industrial Zone Phase #4, PO Box 34572, Jeddah, Makkah 21478
Country
Saudi Arabia

View All Listings by this Company

Print This Approval


#2307026

Range of wall mounted, manual blending shower mixers with (brass bodies - various finishes), incorporating a ceramic cartridge headwork and single lever operating member. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2307026
Note:
Not supplied with hose and handset.
Size:
½” BSP (M) x ¾” BSP (M) offset unions
Marking:
Hansgrohe on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2028
Model:
32 620 xx0 Hansgrohe Talis S. 71 600 xx0 Hansgrohe Logis. 71 262 xx0 Hansgrohe Logis. Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1087 of 2313

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.