Range of stainless-steel press fittings with EPDM ‘O’-rings and EPDM washers. For use with stainless-steel pipe. Joints are achieved using a press fitting tool. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250302020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Aquapipe, Size and Grade (316L) on body - Aquapipe, Size and Grade (316L) on pipe.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

AQ00 PIPE Metal pipe in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm, Ø108mm AQ01 PIPE BRIDGE Metal pipe bridge in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm AQ02 EQUAL COUPLING in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm 76.1mm Ø88.9mm Ø108mm AQ03 ADJUSTABLE COUPLING in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm Ø108mm AQ04 90°EQUAL ELBOW in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm Ø108mm AQ05 90°PLAIN ELBOW in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm Ø108mm AQ06 45°EQUAL ELBOW in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm Ø108mm AQ07 45°PLAIN ELBOW in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm Ø108mm AQ08 EQUAL TEE in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm Ø108mm AQ09 PIPE CAP in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm Ø108mm AQ10 REDUCING TEE in SUS316L/ SUS304 Ø22-Ø18, Ø28-Ø18, Ø28-Ø22, Ø35-Ø18, Ø35-Ø22, Ø35-Ø28,Ø42-Ø18, Ø42-Ø22, Ø42-Ø28, Ø42-Ø35, Ø54-Ø18, Ø54-Ø22, Ø54- Ø28, Ø54-Ø35, Ø54-Ø42, Ø76.1-Ø18, Ø76.1-Ø22, Ø76.1-Ø28, Ø76.1-Ø35, Ø76.1-Ø42, Ø76.1-Ø54, Ø88.9-Ø18, Ø88.9-Ø22, Ø88.9- Ø28, Ø88.9-Ø35, Ø88.9-Ø42, Ø88.9-Ø54, Ø88.9-Ø76.1, Ø108-Ø18, Ø108-Ø22, Ø108-Ø28, Ø108-Ø35,Ø108-Ø42,Ø108-Ø54,Ø108- Ø76.1, Ø108-Ø88.9 AQ11 90°ELBOW FEMALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-1/2, Ø22-3/4, Ø28-3/4, Ø28-1, Ø35-1 1/4, Ø42-1 1/2, Ø54-2 AQ12 90°ELBOW MALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-1/2, Ø22-3/4, Ø28-3/4, Ø28-1, Ø35-1, Ø35-1 1/4, Ø42-1 1/4, Ø42-1 1/2, Ø54-1 1/2, Ø54-2 AQ13 COUPLING MALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-1/2, Ø22-3/4, Ø22-1, Ø28-1/2, Ø28-3/4, Ø28-1, Ø28-1 1/4, Ø35-1, Ø35-1 1/4, Ø35-1 1/2, Ø42-1 1/4, Ø42-1 1/2, Ø54-1 1/2, Ø54-2, Ø76.1-2 1/2, Ø88.9-3 AQ14 COUPLING FEMALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-1/2, Ø22-3/4, Ø22-1, Ø28-1/2, Ø28-3/4, Ø28-1, Ø28-1 1/4, Ø35-1, Ø35-1 1/4, Ø35-1 1/2, Ø42-1 1/2, Ø42-1 1/4, Ø54-1 1/2, Ø54-2, Ø76.1-2 1/2, Ø88.9-3 AQ15 REDUCING COUPLING in SUS316L/ SUS304 Ø22-Ø18, Ø28-Ø18, Ø28-Ø22, Ø35-Ø18, Ø35-Ø22, Ø35-Ø28, Ø42-Ø18, Ø42-Ø22, Ø42-Ø28, Ø42-Ø35, Ø54-Ø18, Ø54-Ø22, Ø54-Ø28, Ø54-Ø35, Ø54-Ø42, Ø76.1-Ø18, Ø76.1-Ø22, Ø76.1-Ø28, Ø76.1-Ø35, Ø76.1-Ø42, Ø76.1-Ø54, Ø88.9-Ø18, Ø88.9-Ø22, Ø88.9- Ø28, Ø88.9-Ø35, Ø88.9-Ø42, Ø88.9-Ø54, Ø88.9-Ø76.1, Ø108-Ø18, Ø108-Ø22, Ø108-Ø28, Ø108-Ø35, Ø108-Ø42, Ø108-Ø54, Ø108-Ø76.1, Ø108-Ø88.9 AQ16 PLAIN REDUCING COUPLING in SUS316L/ SUS304 Ø22-Ø18, Ø28-Ø18, Ø28-Ø22, Ø35-Ø18, Ø35-Ø22, Ø35-Ø28, Ø42-Ø18, Ø42-Ø22, Ø42-Ø28, Ø42-Ø35, Ø54-Ø18, Ø54-Ø22, Ø54- Ø28, Ø54-Ø35, Ø54-Ø42, Ø76.1-Ø54, Ø88.9-Ø54, Ø88.9-Ø76.1, Ø108-Ø54, Ø108-Ø76.1, Ø108-Ø88.9 AQ17 UNION MALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-1/2, Ø22-3/4, Ø22-1, Ø28-3/4, Ø28-1, Ø35-1 1/4, Ø35-1 1/2, Ø42-1 1/2, Ø54-2 AQ18 UNION FEMALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-3/4, Ø22-1, Ø28-1, Ø28-1 1/4, Ø35-1 1/4, Ø35-1 1/2, Ø42-1 1/2, Ø42-2, Ø54-2 AQ19 SHORT TEE MALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-1/2, Ø22-3/4, Ø28-1/2, Ø28-3/4, Ø28-1, Ø35-1/2, Ø35-3/4, Ø35-1, Ø35-1 1/4, Ø42-1/2, Ø42-3/4, Ø42-1, Ø42-11/4, Ø42-1 1/2, Ø54-1/2, Ø54-3/4, Ø54-1, Ø54-1 1/4, Ø54-1 1/2 Ø54-2 AQ20 SHORT TEE FEMALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-1/2, Ø22-3/4, Ø28-1/2, Ø28-3/4, Ø28-1, Ø35-1/2, Ø35-3/4, Ø35-1, Ø35-1 1/4, Ø42-1/2, Ø42-3/4, Ø42-1, Ø42-1 1/4, Ø42-1 1/2, Ø54-1/2, Ø54-3/4, Ø54-1, Ø54-1 1/4, Ø54-1 1/2, Ø54-2, Ø76.1-3/4, Ø76.1-2, Ø88.9-3/4, Ø88.9-2, Ø108-3/4, Ø108-2 AQ21 BASED ELBOW FEMALE in SUS316L/ SUS304 Ø18-1/2, Ø22-1/2, Ø22-3/4, Ø28-1/2, Ø28-1 AQ22 SHORT ELBOW FEMALE in SUS316L/ SUS304 Ø18-1/2, Ø22-1/2, Ø22-3/4, Ø28-1/2, Ø28-3/4,Ø28-1 AQ23 FLANGE in SUS316L/ SUS304 Ø35, Ø42, Ø54, Ø76.1, Ø88.9, Ø108 AQ24 REDUCING FLANGE PIPE in SUS316L/ SUS304 Ø76.1-Ø54, Ø76.1-Ø88.9, Ø88.9-Ø76.1, Ø88.9-Ø108, Ø108-Ø88.9, Ø133-Ø108 There are two kinds of body materials： SUS316L or SUS304 Stainless Steel Pipe according to EN 10312；M-profile press fittings. All imperial fittings are BSP.

Approval Holder:

ZHEJIANG COMPRESSED FLUID TECHNOLOGY CO.,LTD

Company Name

ZHEJIANG COMPRESSED FLUID TECHNOLOGY CO.,LTD

Address

No.18 Mo Gan Shan Road, Beilun District Ningbo, Zhejiang Province

Country

China

General Email

technical02@shangdurz.com

View All Listings by this Company

Range of CU type press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241108017

Size:

see models

Marking:

Flowflex logo, WRAS & size etched on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

5063022703699 PRESS 45DEG STREET ELBOW 15mm 5063022703569 PRESS 45DEG STREET ELBOW 22mm 5063022703705 PRESS 45DEG STREET ELBOW 28mm 5063022703576 PRESS 45DEG ELBOW 15mm 5063022703590 PRESS 45DEG ELBOW 22mm 5063022703682 PRESS 45DEG ELBOW 28mm 5063022703637 PRESS EQUAL ELBOW 15mm 5063022703620 PRESS EQUAL ELBOW 22mm 5063022703750 PRESS EQUAL ELBOW 28mm 5063022703613 PRESS STREET ELBOW 22mm 5063022703743 PRESS STREET ELBOW 28mm 5063022703781 PRESS EQUAL TEE 15mm 5063022703521 PRESS EQUAL TEE 22mm 5063022703767 PRESS EQUAL TEE 28mm 5063022703729 PRESS REDUCED END TEE 5063022703712 PRESS REDUCED BRANCH TEE 5063022703774 PRESS FITTING REDUCER 22 x 15mm 5063022703736 PRESS FITTING REDUCER 28 x 15mm 5063022703545 PRESS FITTING REDUCER 28 x 22mm 5063022703644 PRESS COUPLING 15mm 5063022703675 PRESS COUPLING 22mm 5063022703583 PRESS COUPLING 28mm 5063022703606 PRESS SLIP COUPLER 15mm 5063022703651 PRESS SLIP COUPLER 22mm 5063022703668 PRESS STOP END 15mm 5063022703538 PRESS STOP END 22mm 5063022703552 PRESS STOP END 28mm

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Manufacturer:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

Range of clamp fittings incorporating DZR brass bodies. For use with PE 100 RC pipe (manufactured to EN12201) only. Maximum operating pressure: 16 bar. Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250504005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODELS

Marking:

Uponor logo (U), CR, W (wipex code on connections) and size.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

Wipex coupling: 1018328 (size 25x2,3-G1) 1018329 (size 32x2,9-G1) 1018330 (size 40x3,7-G1 ¼) 1018331 (size 50x4,6-G1 ¼) 1018332 (size 63x5,8-G2) 1018333 (size 75x6,8-G2) 1018334 (size 90x8,2G3) 1018335 (size 110x10,0-G3) Wipex tee: 1018345 (size G1-G1-G1) 1018346 (size G1 ¼-G1 ¼-G1 ¼) 1018347 (size G2-G2-G2) 1018348 (size G3-G3-G3) Wipex elbow: 1018350 (size G1-G1) 1018351 (size G1 ¼-G1 ¼) 1018352 (size G2-G2) 1018353 (size G3-G3) Wipex sleeve: 1018355 (size G1-G1) 1018356 (size G1 ¼-G1 ¼) 1018357 (size G2-G2) 1018358 (size G3-G3) Wipex flange: 1018359 (size F25/4-85/G1) 1018360 (size F32/4-100/G1 ¼) 1018362 (size F50/4-125/G2) 1018364 (size F80/8-160/G3) Wipex reducer male x female: 1018368 (size G1 ¼-G1) 1018369 (size G1 ½-G1 ¼) 1018371 (size G2-G1) 1018372 (size G2-G1 ¼) 1018374 (size G3-G1) 1018375 (size G3-G1 ¼) 1018376 (size G3-G2) Wipex jointing equal: 1042972 (size 25x2,3-25x2,3) 1042973 (size 32x2,9-32x2,9) 1042980 (size 40x3,7-40x3,7) 1042984 (size 50x4,6-50x4,6) 1042981 (size 63x5,8-63x5,8) 1042985 (size 75x6,8-75x6,8) 1042986 (size 90x8,2-90x8,2) 1042987 (size 110x10-110x10) Wipex swivel union: 1045455 (size G1) 1045456 (size G1 ¼-G1) 1045457 (size G1 ¼) 1045458 (size G2-G1 ¼) 1045459 (size G2) 1045460 (size G3-G2) 1045461 (size G3)

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

‘ZL’ range of U profile press fittings (nickel plated brass bodies) for use with ‘ZL’ range of PERT/AL/PERT multi-layered pipes. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer

Section Subtitle:

Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.

WRAS Approval Number:

240704742

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

16mm – 32mm

Marking:

HEAT logo and size on crimp of the body HEATMAG and product info on pipe.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Equal Straight Union ZL-KY101-S1616 S16X16 ZL-KY101-S2020 S20X20 ZL-KY101-S2525 S25X25 ZL-KY101-S3232 S32X32 Unequal Straight Union ZL-KY102-S2016 S20X16 ZL-KY102-S2516 S25X16 ZL-KY102-S2520 S25X20 ZL-KY102-S3216 S32X16 ZL-KY102-S3220 S32X20 ZL-KY102-S3225 S32X25 Male Straight Union ZL-KY103-S1612M S 16X1/2M ZL-KY103-S1634M S 16X3/4M ZL-KY103-S2012M S 20X1/2M ZL-KY103-S2034M S 20X3/4M ZL-KY103-S2512M S 25X1/2M ZL-KY103-S2534M S 25X3/4M ZL-KY103-S2511M S25X1M ZL-KY103-S3234M S 32X3/4M ZL-KY103-S3211M S 32X1M Female Straight Union ZL-KY104-S1612F S 16X1/2 F ZL-KY104-S1634F S 16X3/4 F ZL-KY104-S2012F S 20X1/2 F ZL-KY104-S2034F S 20X3/4 F ZL-KY104-S2534F S 25X3/4 F ZL-KY104-S2511F S 25X1 F ZL-KY104-S3234F S 32X3/4 F ZL-KY104-S3211F S 32X1 F Swivel Coupling ZL-KY105-1612F 16X1/2F ZL-KY105-2012F 20X1/2F ZL-KY105-2034F 20X3/4F ZL-KY105-2534F 25X3/4F Equal Elbow ZL-KY106-L1616 L 16X16 ZL-KY106-L2020 L 20X20 ZL-KY106-L2525 L 25X25 ZL-KY106-L3232 L 32X32 Female Elbow ZL-KY107-L1612F L 16X1/2 F ZL-KY107-L1634F L 16X3/4 F ZL-KY107-L2012F L 20X1/2 F ZL-KY107-L2034F L 20X3/4 F ZL-KY107-L2534F L 25X3/4 F ZL-KY107-L2511F L 25X1 F ZL-KY107-L3211F L 32X1 F Male Elbow ZL-KY108-L1612M L16x1/2M ZL-KY108-L2012M L20x1/2M ZL-KY108-L2034M L20X3/4M ZL-KY108-L2534M L25x3/4M ZL-KY108-L3211M L32x1M Swivel Elbow ZL-KY109-1612F 16X1/2F ZL-KY109-2034F 20X3/4F Equal Tee ZL-KY110-T161616 T 16X16X16 ZL-KY110-T202020 T 20X20X20 ZL-KY110-T252525 T 25X25X25 ZL-KY110-T323232 T 32X32X32 Unequal Tee ZL-KY111-T162016 T 16X20X16 ZL-KY111-T201616 T 20X16X16 ZL-KY111-T201620 T20X16X20 ZL-KY111-T202016 T20X20X16 ZL-KY111-T251625 T 25X16X25 ZL-KY111-T252516 T 25X25X16 ZL-KY111-T251616 T25X16X16 ZL-KY111-T252020 T 25X20X20 ZL-KY111-T252025 T 25X20X25 ZL-KY111-T321632 T32X16X32 ZL-KY111-T322032 T32X20X32 ZL-KY111-T322525 T32X25X25 ZL-KY111-T322532 T32X25X32 Female Tee ZL-KY112-T2512F25 T25X1/2FX25 Elbow With Plate-Male ZL-KY114-1612M 16X1/2M ZL-KY114-1634M 16X3/4 M ZL-KY114-2034M 20X3/4 M Elbow with Plate-Female ZL-KY115-1612F 16X1/2 F ZL-KY115-1634F 16X3/4F ZL-KY115-2012F 20X1/2F ZL-KY115-2034F 20X3/4F End cap ZL-KY116-16 16 ZL-KY116-20 20 ZL-KY116-25 25 ‘ZL' range of PERT/AL/PERT multi-layer pipes. BWRB1620100 16*2.0 BWRB2020200 20*2.0 BTRB2525100 25*2.5 BTRB3230100 32*3.0

Approval Holder:

ALLIED PLUMBING & HEATING LTD.

Company Name

ALLIED PLUMBING & HEATING LTD.

Address

UNIT 16 BOUGHTON ROAD, LONDON

Postcode

SE28 0AG

View All Listings by this Company

Range of compression fittings with brass or nickel plated brass for use with copper pipe (manufactured to EN 1057). Above ground use only for use. Max working pressure 16 bar. Max operating temperature 85°C

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241004053

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

8mm – 35mm.

Marking:

CUB, EN1254-2 and SIZE on nut.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

COEL08: Comp 8mm x 8mm 90 Deg Elbow, COEL10: Comp 10mm x 10mm 90 Deg Elbow, COEL15: Comp 15mm x 15mm 90 Deg Elbow, COEL22: Comp 22mm x 22mm 90 Deg Elbow, COEL2215: Comp 22mm x 15mm 90 Deg Elbow, COEL28: Comp 28mm x 28mm 90 Deg Elbow, COEL35: Comp 35mm x 35mm 90 Deg Elbow, COELWP15: Comp 15mm x 1/2", COELWP22: Comp 22mm x 3/4", COEL081/4MI: Comp 8mm x 1/4", COEL101/4MI: Comp 10mm x 1/4", COEL103/8MI: Comp 10mm x 3/8", COEL151/2MI: Comp 15mm x 1/2", COEL151/4MI: Comp 15mm x 1/4", COEL153/4MI: Comp 15mm x 3/4", COEL153/8MI: Comp 15mm x 3/8", COEL221/2MI: Comp 22mm x 1/2", COEL221MI: Comp 22mm x 1", COEL223/4MI: Comp 22mm x 3/4", COEL281MI: Comp 28mm x 1", COEL3511/4MI: Comp 35mm x 1 1/4", COEL081/4FI: Comp 8mm x 1/4", COEL103/8FI: Comp 10mm x 3/8", COEL151/2FI: Comp 15mm x 1/2", COEL153/4FI: Comp 15mm x 3/4", COEL221/2FI: Comp 22mm x 1/2", COEL221FI: Comp 22mm x 1", COEL223/4FI: Comp 22mm x 3/4", COEL281FI: Comp 28mm x 1", COEL3511/4FI: Comp 35mm x 1 1/4", COCO08: Comp 8mm Coupler, COCO10: Comp 10mm Coupler, COCO15: Comp 15mm Coupler, COCO22: Comp 22mm Coupler, COCO28: Comp 28mm Coupler, COCO35: Comp 35mm Coupler, CORC15: Comp 15mm Repair Coupler, COCO081/2MI: Comp 8mm x 1/2" REMOVED, COCO081/4MI: Comp 8mm x 1/4", COCO083/8MI: Comp 8mm x 3/8", COCO101/2MI: Comp 10mm x 1/2", COCO101/4MI: Comp 10mm x 1/4", COCO103/8MI: Comp 10mm x 3/8", COCO151/2MI: Comp 15mm x 1/2", COCO151/4MI: Comp 15mm x 1/4", COCO153/4MI: Comp 15mm x 3/4", COCO153/8MI: Comp 15mm x 3/8, COCO221/2MI: Comp 22mm x 1/2", COCO221MI: Comp 22mm x 1", COCO223/4MI: Comp 22mm x 3/4", COCO281MI: Comp 28mm x 1", COCO283/4MI: Comp 28mm x 3/4", COCO283/4MI: Comp 28mm x 3/4" DUPLICATE, COCO3511/4MI: Comp 35mm x 1.1/4", COCO3511/4MI: Comp 35mm x 1.1/4"DUPLICATE, COCO081/4FI: Comp 8mm x 1/4", COCO083/8FI: Comp 8mm x 3/8", COCO101/2FI: Comp 10mm x 1/2", COCO101/4FI: Comp 10mm x 1/4", COCO103/8FI: Comp 10mm x 3/8, COCO151/2FI: Comp 15mm x 1/2", COCO151/4FI: Comp 15mm x 1/4", COCO153/4FI: Comp 15mm x 3/4", COCO153/8FI: Comp 15mm x 3/8", COCO221/2FI: Comp 22mm x 1/2", COCO221FI: Comp 22mm x 1", COCO223/4FI: Comp 22mm x 3/4", COCO281FI: Comp 28mm x 1", COCO283/4FI: Comp 28mm x 3/4", COCO3511/4FI: Comp 35mm x 1 1/4", COCO1008: Comp 10mm x 8mm, COCO1508: Comp 15mm x 8mm, COCO1510: Comp 15mm x 10mm, COCO1512: Comp 15mm x 12mm, COCO2215: Comp 22mm x 15mm, COCO2815: Comp 28mm x 15mm, COCO2822: Comp 28mm x 22mm, COTE08: Comp 8mm Equal Tee, COTE10: Comp 10mm Equal Tee, COTE15: Comp 15mm Equal Tee, COTE22: Comp 22mm Equal Tee, COTE28: Comp 28mm Equal Tee, COTE35: Comp 35mm Equal Tee, COTE222215: Comp 22mm x 22mm x 15mm , COTE282815: Comp 28mm x 28mm x 15mm, COTE282822: Comp 28mm x 28mm x 22mm, COTE151522: Comp 15mm x 15mm x 22mm, COTE221515: Comp 22mm x 15mm x 15mm, COTE222815: Comp 22mm x 28mm x 15mm, COTE282222: Comp 28mm x 22mm x 22mm, COTE221522: Comp 22mm x 15mm x 22mm, COTE15151/2FI: Comp 15mm x 15mm x 1/2", COTE22221/2FI: Comp 22mm x 22mm x 1/2", COTE22223/4FI: Comp 22mm x 22mm x 3/4", COTE28281/2FI: Comp 28mm x 28mm x 1/2", COTC15: Comp 15mm Tank Connector, COTC22: Comp 22mm Tank Connector, COTC28: Comp 28mm Tank Connector, COTC35: Comp 35mm Tank Connector, COEC08: Comp 8mm End Cap, COEC10: Comp 10mm End Cap, COEC15: Comp 15mm End Cap, COEC22: Comp 22mm End Cap, COEC28: Comp 28mm End Cap, COEC35: Comp 35mm End Cap, COSTC151/2: Comp 15mm x 1/2", COSTC153/4: Comp 15mm x 3/4", COSTC223/4: Comp 22mm x 3/4", COBTC151/2: Comp 15mm x 1/2", COBTC223/4: Comp 22mm x 3/4", CPCO15: Comp Chrome 15mm Coupler, CPCO22: Comp Chrome 22mm Coupler, CPCO151/2FI: Comp Chrome 15mm x 1/2", CPCO223/4FI: Comp Chrome 22mm x 3/4", CPCO151/2MI: Comp Chrome 15mm x 1/2", CPCO153/8MI: Comp Chrome 15mm x 3/8", CPCO223/4MI: Comp Chrome 22mm x 3/4", CPEC15: Comp Chrome 15mm End Cap, CPEC22: Comp Chrome 22mm End Cap, CPEL15: Comp Chrome 15mm Elbow, CPEL22: Comp Chrome 22mm Elbow, CPEL28: Comp Chrome 28mm Elbow, CPEL151/2FI: Comp Chrome 15mm x 1/2", CPEL221FI: Comp Chrome 22mm x 1", CPEL223/4FI: Comp Chrome 22mm x 3/4", CPEL151/2MI: Comp Chrome 15mm x 1/2", CPEL223/4MI: Comp Chrome 22mm x 3/4", CPELWP15: Comp Chrome 15mm x 1/2", CPTE15: Comp Chrome 15mm Tee, CPTE22: Comp Chrome 22mm Tee, CPTE151522: Comp Chrome 15mm x 15mm x 22mm, CPTE221515: Comp Chrome 22mm x 15mm x 15mm, CPTE222215: Comp Chrome 22mm x 22mm x 15mm.

Approval Holder:

Cubralco Ltd.

Company Name

Cubralco Ltd.

Address

Ricketts Close, Firs Industrial Estate, Kidderminster, Worcestershire

Postcode

DY11 7QN

View All Listings by this Company

‘CFxx and TFxx’ range of brass compression fittings for use with copper pipes and Irish copper pipe (both manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperatures: CF15 and CF16 models: 65°C. All other models: 85°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

250415018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

CF19, TF09 and CF26 models: Valtech on body. All other models: Valtech on compression nut.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

CF01 - Straight Coupler CxC: ½", ¾", 1", 1¼", 1½", 2". CF03 - Straight Coupler CxC: ¾"*½", 1"*½", 1"*¾", 1¼"*¾", 1¼"*1", ½"*10mm, ½"*12mm, ½"*15mm, ¾"*22mm. CF01L - Repair Coupling CXC: ½"*½", ¾"*¾". CF07 - Straight Coupler M.I. X C: ½", ¾", 1", 1¼", 1½", 2", ½"*¾", ¾"*½", 1"*¾", ¾"*1", 1"*1¼", 1¼"*1", 1½"*1¼", 2"*1½". CF05 - Straight Coupler F.I. x C: ½", ¾", 1", 1¼", 1½", 2", ½"*¾", ¾"*½", 1"*¾", ¾"*1", 1¼"*1", 1“*1¼", 2“*1½". CF15 - Swivel Coupler F.I. x C: ½", ¾". CF02 - Elbow C x C: ½", ¾", 1", 1¼", 1½", 2", ¾"*½", 1"*¾", ½"*15mm, ¾"*22mm. CF08 - Elbow M.I. x C: ½", ¾", 1", 1¼", 1½", 2", ¾"*½", 1"*¾", ½"*¾", ¾"*1". CF06 - Elbow F.I. x C: ½", ¾", 1", 1¼", 1½", 2", ½"*¾", ¾"*½", ¾"*1", 1"*¾". CF10 - Wallplate Elbow F.I. x C: ½"*½", ¾"*¾", ½"*¾". CF11 - Equal Tees CxCxC: ½", ¾", 1", 1¼", 1½", 2". CF12 - Reducing Tee C x C x C: ½"*½"*¾", ¾"*¾"*½", ¾"*¾"*1", 1"*1"*½", 1"*1"*¾", 1¼"*1¼"*½", 1¼"*1¼"*¾", 1¼"*1¼"*1", 1½"*1½"*¾", 1½"*1½"*1", 1½"*1½"*1¼", ¾"*½"*¾", 1"*½"*1", 1"*½"*¾", 1"*¾"*1", ¾"*½"*½", 1"*¾"*¾", 1"*¾"*½", 1"*½"*½", 10mm*10mm*½", ½"*10mm*10mm, ½"*10mm*½", ½"*½"*10mm. CF24 - Cross CxCxCxC: ½", ¾", ¾"*½"*½"*½". CF16 - Swivel Elbow F.I. x C: ½", ¾". CF13 - Tee CxCxF.I.: ½", ¾", 1", ¾"*¾"*½", 1"*1"*½", 1"*1"*¾". CF19 - Reducing Set: ¾"*½", 1"*½", 1"*¾", 1¼"*½", 1¼"*¾", 1¼"*1", 1½"*½", 1½"*¾", 1½"*1", 1½"*1¼", 2"*½", 2"*¾", 2"*1", 2"*1¼", 2"*1½". CF17 - Flanged Tank Connector with Backnut: ½", ¾", 1", 1¼", 1½", 2". CF14 - Stop End: ½", ¾", 1", 1¼", 1½", 2". TF09 - Blank Cap and Washers: ½", ¾", 1", 1¼", 1½", 2". TF26 - Coupling Nut: ½", ¾", 1", 1¼", 1½", 2". CF26 - Compression Ring: ½", ¾", 1", 1¼", 1½", 2". Where M.I. = BSP (M) and F.I. = BSP (F).

Product Images

Approval Holder:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

1130 Baizhang Road Ningbo Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

1130 Baizhang Road Ningbo Zhejiang

Country

China

View All Listings by this Company

Range of Copper and Brass push fit fittings. Brass fittings are for use with PB pipe (manufactured to BS7291-2) & Copper pipe (manufactured to BS EN 1057) only. Copper fittings are for use with PB pipe (manufactured to BS7291-2), PE-X pipe (manufactured to BS7291-3) & Copper pipe (manufactured to BS EN 1057). Maximum working pressures and operating temperatures when used with: PB & PEX pipe – 3.0 bar and 92°C, 20.0 bar cold water. Copper pipe – 20.0 bar and 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250402008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

10mm – 22mm.

Marking:

TLC Logo and size on body

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

Copper Model Code (Size): SCE6711M (10mm Pushfit) SCE6744M (Push-fit 22mm) SCE6766M (15mm Pushfit) SCE6766MC (15mm Pushfit) SCAE6766M (15mm Pushfit) SCASE6766M (15mm Pushfit) SCRD6716M (10mm x 15mm Pushfit Stem) SCRD6764M (15mm x 22mm Pushfit Stem) SCSE6766M (15mm Pushfit) SCU6711M (10mm Pushfit) SCU6744M (22mm Push-fit) SCU6766M (15mm Pushfit) SCU6766MC (15mm Pushfit) SCT67444M (22mm Push-fit) SCT67446M (22mm x 22mm x 15mm Push-fit) SCT67666M (15mm Pushfit) SCST676M (15mm Push-fit) SCST674M (22mm Push-fit) Brass Model Code (Size): SBDE6766M (15mm Pushfit) SBDMC6764M (15mm Pushfit x 1/2” BSPT (M)) SBDME6764M (15mm Pushfit x 1/2” BSPT (M)) SBDU6766M (15mm Pushfit) SBDT67666M (15mm Pushfit)

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro 678 beon-gil Seo-gu Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

View All Listings by this Company

Flomasta Range of plastic, push-fit fittings (wall plate elbow, equal elbow, end stop, pipe insert, equal straight and equal tee) for use with MDPE pipe (manufactured to BS EN 12201), for above and below ground use. Copper adaptors are for use with PB pipe (manufactured to BS7291-2), PEX pipe (manufactured to BS7291-3) or Copper pipes (manufactured to BS EN 1057) and are for above ground use only. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250302053

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to models

Marking:

TLC logo and size on body. Size and PN on plastic nut.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

Flomasta Range of plastic push-fit fittings SMDCA6726M - 20mm X 15mm. SMDCA6784M - 25mm X 22mm. SMDCA6786M - 25mm X 15mm. SMDE6722M, SMDST672M, SMTS20M, SMDU6722M & SMDT67222M - 20mm. SMDE6788M, SMDST678M, SMDU6788M, SMDT67888M & SMTS25M - 25mm. SMDWP6784M - 25mm x ½” BSP (M). SMDWP6724M - 20mm x ½” BSP (F) (Wall Plate Elbow).

Approval Holder:

Kingfisher Plc.

Company Name

Kingfisher Plc.

Address

1 Paddington Square, London

Postcode

W2 1GG

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro 678 beon-gil Seo-gu Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

View All Listings by this Company

Flomasta Range of Copper and Brass push fit fittings. Brass fittings are for use with PB pipe (manufactured to BS7291-2) & Copper pipe (manufactured to BS EN 1057) only. Copper fittings are for use with PB pipe (manufactured to BS7291-2), PE-X pipe (manufactured to BS7291-3) & Copper pipe (manufactured to BS EN 1057). Maximum working pressures and operating temperatures when used with: PB & PEX pipe – 3.0 bar and 92°C, 20.0 bar cold water. Copper pipe – 20.0 bar and 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250402063

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

10mm – 22mm.

Marking:

TLC Logo and size on body

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

Copper Model Code (Size): SCE6711M (10mm Pushfit) SCE6744M (Push-fit 22mm) SCE6766M (15mm Pushfit) SCE6766MC (15mm Pushfit) SCAE6766M (15mm Pushfit) SCASE6766M (15mm Pushfit) SCRD6716M (10mm x 15mm Pushfit Stem) SCRD6764M (15mm x 22mm Pushfit Stem) SCSE6766M (15mm Pushfit) SCU6711M (10mm Pushfit) SCU6744M (22mm Push-fit) SCU6766M (15mm Pushfit) SCU6766MC (15mm Pushfit) SCT67444M (22mm Push-fit) SCT67446M (22mm x 22mm x 15mm Push-fit) SCT67666M (15mm Pushfit) SCST676M (15mm Push-fit) SCST674M (22mm Push-fit) Brass Model Code (Size): SBDE6766M (15mm Pushfit) SBDMC6764M (15mm Pushfit x 1/2” BSPT (M)) SBDME6764M (15mm Pushfit x 1/2” BSPT (M)) SBDU6766M (15mm Pushfit) SBDT67666M (15mm Pushfit)

Approval Holder:

Kingfisher Plc.

Company Name

Kingfisher Plc.

Address

3 Sheldon Square, Paddington, London

Postcode

W2 6PX

Phone

+44 (0) 20 7372 8008

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro 678 beon-gil Seo-gu Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

View All Listings by this Company

Range of DZR brass push fit fittings for use with copper pipe (EN1057). Maximum working pressure 10.0 Bar. Maximum operating temperature 65 °C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250512018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

“IDC” logo & size on body.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

2PAA014 - Push-fit straight fitting 1/2”(14.7mm), 2PAA021 - Push-fit straight fitting 1/2”(14.7mm), 2PAB014 - Push-fit Elbow fitting 1/2”(14.7mm), 2PAB021 - Push-fit Elbow fitting 3/4”(21mm), 2PAC014 - Push-fit equal Tee fitting 1/2”(14.7mm), 2PAC021 - Push-fit equal Tee fitting 3/4”(21mm), 2PAD014 - Push-fit Stop End 1/2”(14.7mm), 2PAD021 - Push-fit Stop End 3/4”(21mm), 2PAE002 - Push-fit x Male straight adapter 1/2”(14.7mm) x 3/4”M, 2PAA121 - Push-fit Reduce straight adapter 3/4”(21mm) x 1/2”(14.7mm), 2PPA142 - Pushfit Straight Pushfit x Pipe 1/2”(14.7mm) x 3/4”(21mm), 2PAC221 - Push-fit Reduce Tee fitting 3/4”(21mm) x 3/4”(21mm) x 1/2”(14.7mm), 2PAC211 - Push-fit Reduce Tee fitting 3/4”(21mm) x 1/2”(14.7mm) x 1/2”(14.7mm), 2PAC212 - Push-fit Reduce Tee fitting 3/4”(21mm) x 1/2”(14.7mm) x 3/4”(21mm).

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Ltd

Company Name

IDC Plumbing & Heating Technology (Beijing) Ltd

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company