Spray handset for personal hygiene (brass bodied - various finishes) incorporating a trigger mechanism controlling the flow. The handset also has a locking ring. The inlet incorporates an approved check valve cartridge with an integral plastic flow regulator; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

240504018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

THG etched on Body

Installation Requirements:

R001 R070 R415

Expiry date:

31/05/2029

Model:

G00-XXX-4270B/W. Where XXX denotes finishes and can be replaced by: A02-Polished Chrome, A13-Smoked Brass, B01-Polished Nickel, C01-Matte Nickel, C02-Matte Chrome, C27-Unlacquered Brass, C47-Smoked Nickel, D01-Light Bronze Lacquered, D05-Lacquered Matte Bronze, D10-USA Oil-Rubbed Bronze, D12-Polished Brass Lacquered, D15-Polished Black Lacquered, D16-White Lacquered, D18-Matte Black lacquered, D21-Old Oil-Rubbed Bronze, D24-Aranja, H17-Matt Aranja, F01-Polished Gold, F07-Matte Gold, F18-Rhodium Silver, F19-Matt Rhodium Silver, F27-Rose Gold, F30-Soft Gold, F31-Matte Soft Gold, F33-Brown Bronze PVD, F34-Matte Brown Bronze PVD, G01-Polished Nickel/Polished Gold, G02-Polished Chrome/Polished Gold, H03-Lacquered Antique Silver, H07-Varnished Matte Antique Red Copper, H08-Lacquered Matte Antique Silver, H24-Lacquered Antique Copper, H28-Antique Nickel, H49-Brass PVD, H50-Matte Brass PVD, H52-Gold PVD, H53-Matte Gold PVD, H55-Nickel PVD, H56-Matte Nickel PVD, H60-Matte Blush PVD, H62-Blush PVD, H64-Graphite PVD, H65-Matte Graphite PVD, H66-Umber PVD, H67-Matte Umber PVD

Product Images

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

‘Monsoon Standard’ range of single and twin ended shower booster pumps with brass bodies, brass impellers, EPDM seals and NBR ‘O’-rings. The inlet(s) of the pump body incorporate(s) a plastic strainer. Models with push fit connections include an integral isolation valve. Pushfit connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240504702

Note:

R007 & R009 applies to the 21mm & 22mm pushfit inlet/outlet hoses.

Size:

44428 - Monsoon S1.5 bar Twin EXIP model: ¾” BSP (M) (inlet/outlet). ROI suffix models: Stainless steel braided EPDM lined flexible hose assemblies incorporating 21mm push-fit end connections (inlet/outlet). EXP suffix models: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ¾” captive nut end connections (inlet/outlet). All other models: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating 22mm push-fit end connections (inlet/outlet).

Marking:

Stuart Turner, model no., serial no, part no., pressure rating, Monsoon, manufacturer’s address and other technical information on adhesive label on body.

Installation Requirements:

R001 R007 R009 R415

Expiry date:

31/05/2029

Model:

46420: Monsoon S4.5 bar Single, 46419: Monsoon S3.0 bar Single, 46418: Monsoon S4.5 bar Twin, 46417: Monsoon S4.0 bar Twin, 46416: Monsoon S3.0 bar Twin, 46415: Monsoon S2.0 bar Twin, 46506: Monsoon S1.5 bar Twin, 44754: Monsoon S1.5 bar Twin, 46497: Monsoon S2.0 bar Single, 44424: Monsoon S1.5 bar Twin, 44423: Monsoon S2.0 bar Twin, 44422: Monsoon S2.0 bar Single, 44428: Monsoon S1.5 bar Twin EXIP, 46420ROI: Monsoon S4.5 bar Single, 46419ROI: Monsoon S3.0 bar Single, 46418ROI: Monsoon S4.5 bar Twin, 46417ROI: Monsoon S4.0 bar Twin, 46416ROI: Monsoon S3.0 bar Twin, 46415ROI: Monsoon S2.0 bar Twin, 46506ROI: Monsoon S1.5 bar Twin, 46497ROI: Monsoon S2.0 bar Single, 46420EXP: Monsoon S4.5 bar Single, 46419EXP: Monsoon S3.0 bar Single, 46418EXP: Monsoon S4.5 bar Twin, 46417EXP: Monsoon S4.0 bar Twin, 46416EXP: Monsoon S3.0 bar Twin, 46415EXP: Monsoon S2.0 bar Twin, 46506EXP: Monsoon S1.5 bar Twin, 46497EXP: Monsoon S2.0 bar Single.

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Manufacturer:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of horizontal or vertical multi-stage pumps with a stainless-steel body (HM models) or cast iron body with blue coloured cationic resin coating (VM models), incorporating either plastic or stainless-steel impellers (see model), stainless steel sleeve, EPDM gaskets and seals. Maximum working pressure 10.0 bar / 16.0 bar (see models). Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240206701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

HM models: 1” - 2” BSP (F) VM models: 1¼” - 1½” BSP (F).

Marking:

Lowara or Goulds Water Technology (both brands of Xylem), manufacturer and address, model number, serial number, maximum working pressure and technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

28/02/2029

Model:

1HM, 3HM, 5HM, 10HM, 15HM & 22HM. 1VM, 3VM, 5VM & 10VM. Model nomenclature: W XXX YY Z EM Where: W - flow rate (m3/h), either 1, 3, 5, 10, 15, or 22. XXX - Model type: Horizontal (HM) or Vertical (VM) mode, where last (optional) digit can denote the variable speed drive as follows: Null = standard asynchronous motor, H = equipped with Hydrovar, X = other drives, E = e-SM. YY - Number of impellers/stages HM models: 2-25 stages only (02-25), VM models: 2-8 stages only (02-08). Z - Material, where: (P) is plastic impeller and SS AISI 304 body (HM & VM models), (S) is SS AISI 304 impeller and body (HM models only), (N) is SS AISI 316 impeller and body (HM models only). E = 5 - 6 digits for electrical specification. M = 3 digits, where: 1st digit: Mech. rotary seal - V = Aluminium oxide (Ceramic), or Mech. rotary seal - Q = Silicon carbide (Ceramic). 2nd digit: Mech. stationary seal - B = Carbon resin impregnated. 3rd digit: Mech. seal elastomers - E = EPDM. Example code: 1HM03P05M5HVBE. Max Working Pressure for VM models → 10 bar. Max Working Pressure for HM models with stainless steel impellers and QBE Mechanical Seal → 16 bar (Depending on number of stages - see below), Max Working Pressure for HM models with plastic impellers and/or VBE Mechanical Seal → 10 bar (Depending on number of stages - see below). 1HM (P)/(S)/(N) 1-16 stages - 10.0 bar, 1HM (S)/(N) 18-25 stages - 16.0 bar. 3HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 3HM (S)/(N) 14-21 stages - 16.0 bar. 5HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 5HM (S)/(N) 14-21 stages - 16.0 bar. 10HM (P)/(S)/(N) 1-8 stages - 10.0 bar, 10HM (S)/(N) 9-13 stages - 16.0 bar. 15HM (S)/(N) 2-7 stages - 10.0 bar, 22HM (S)/(N) 2-5 stages - 10.0 bar.

Approval Holder:

Xylem Service Italia S.r.l

Company Name

Xylem Service Italia S.r.l

Address

Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza

Country

Italy

Phone

0039 0444 707111

View All Listings by this Company

Manufacturer:

Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.

Company Name

Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.

Address

View All Listings by this Company

Range of multistage pumps with stainless steel bodies, impellers, shaft and outer sleeve. SC family models are submersible pumps. SCD family models are surface pumps only. SCDS family models can be used either as a surface pump or as a submersible pump. SCD/SCDS models: Maximum working pressure 10.0 bar. SC models: Open outlet use only. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240202717

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SC models: Suction fed inlet x 1¼" BSP (F) outlet. SCD/SCDS models: 1¼" BSP (F) inlet/outlet.

Marking:

Xylem, Lowara, CE, model and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

28/02/2029

Model:

Model Code: XAAY/ZZ/F Where: X denotes the flow rate: This can be any digit 1 to 8. AA denotes the family code: SC (without float switch option only). SCD. SCDS (without float switch option only). Y denotes the stages: This can be any digit 2 to 9. ZZ/F: all the subsequent digits/letters are related to electrical features.

Approval Holder:

Xylem Service Italia S.r.l

Company Name

Xylem Service Italia S.r.l

Address

Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza

Country

Italy

Phone

0039 0444 707111

View All Listings by this Company

Range of shower outlets, (brass bodies - various finishes), incorporating ball joints, EPDM ‘O’-rings and NBR rubber seals. Maximum operating temperature 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240504019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (F) ½” BSP (F) ¾” BSP (M) ½” BSP (M

Marking:

THG etched on body

Installation Requirements:

R001 R040

Expiry date:

31/05/2029

Model:

186PR/W,286/W,288L/W,290/B/W,290/J/W,290/M/W,910PR/W & 3640/W Finishes: A01 – Brass polished, uncoated A02 – Polished Chrome B01 – Polished Nickel C01 – Matt Nickel C02 – Matt Chrome C03 – Satin Chrome C05 – Nickel satiné C47 – Nickel Fumé D01 – Varnished Clear Bronze D05 – Varnished Matt Bronze D13 – Carbon D24 – Black nickel (Aranja) F01 – Polished Gold F03 – Satin gold F07 – Matt gold F18 – Rhodium Silver F19 – Matt Rhodium Silver F27 – Rose Gold F30 – Soft gold F31 – Soft matt gold F32 – Soft satin gold F33 – Brown bronze F34 – Matt brown bronze color PVD H03 – Varnished Antique Silver H06 – Red copper matt, coated H07 – Matt Antique Red Copper H17 – Matt aranja H21 – Red copper polished, uncoated H24 – Varnished Antique Red Copper H27 – Bronze satin H28 – Antique nickel H30 – Antique matt sylver H49 – Brass color PVD H50 – Matt brass color PVD H52 – Gold color PVD H53 – Matt gold color PVD H55 – Nickel color PVD H56 – Matt nickel color PVD H58 – Brushed stainless steel color PVD H59 – Stainless steel color PVD H60 – Matt blush PVD H62 – Blush PVD H63 – Dark Nickel H64 – Graphite PVD H65 – Matt graphite PVD H66 – Umber PVD H67 – Matt umber PVD

Product Images

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company