Range of concealed and exposed two-way diverters, (brass bodies – various finishes, trim sets and operating members). The inlets on XX1650YY and XX1721YY models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C (PSA019 YY, PSA020 YY & XX1782YY) Maximum operating temperature 60°C (PSH049, XX1650YY, RZ/1721 & XX1721YY).

Section:

2050 Diverter

Section Subtitle:

Diverter cartridge(s) with manual adjustment.

WRAS Approval Number:

250202002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Compression models are for use with copper pipe (manufactured to BS EN 1057)

Size:

½” BSP (M) (XX1650YYY & XX1721YYY) 19mm compression fitting (XX1782YY)

Marking:

Lefroy Brooks logo on body (XX1782YY) or operating member (XX1650YY & XX1721YY)

Installation Requirements:

R001 R010 R040

Expiry date:

28/02/2030

Model:

Exposed PSA019YY PSA020YY Concealed XX1782YY XX1650YY XX1721YY Rough insets only: PSH049 RZ/1721 Where XX denotes the type of trim/operating members and can be replaced with any of the following, as examples: LB (Classic cross handle) LS (Classic star handle) BL (Classic lever black ceramic) WL (Classic lever white ceramic) CH (Connaught cross handle) CR (Black crystal lever) FH (La Chapelle cross handle) FM (La Chapelle lever metal) FB (La Chapelle lever black ceramic) FW (La Chapelle lever white ceramic) MH (Mackintosh cross handle) ML (Mackintosh lever) MB (Mackintosh black lever) TH (Ten Ten handwheel) TL (Ten Ten lever) Where YY denotes the colour/plating options and can be replaced with any of the following as examples: CP = Polished Chrome NK = Polished Nickel BC = Brushed Chrome BN = Brushed Nickel PB = Polished Brass BPB = Brushed Brass AB = Aged Brass TA = Taunton AG = Antique Gold HRG = Hard Rubbed Gold CM = Champagne Gold BCM = Brushed Champagne Gold CO = Copper MBC = Matt Black Chrome

Approval Holder:

Lefroy Brooks

Company Name

Lefroy Brooks

Address

Unit 3 Marston Industrial Estate Marston Road Wolverhampton

Postcode

WV2 4LX

Country

United Kingdom

Phone

01902 390 891

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of regulating and shut-off valves with brass bodies and EPDM ‘O’-Rings. Maximum working pressure 16.0 Bar for BSP (M) and 25.0 bar for BSP (F). Maximum operating temperature 85.0°C

Section:

2170 Valves

Section Subtitle:

Flow control, manually operated valve(s)

WRAS Approval Number:

241002007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Male thread DN15 – DN 50 Female thread DN15 – DN50

Marking:

Oventrop logo, flow arrow, PN and DN on body. Oventrop, product name and DN on face plate.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

HydroControl V Double regulating valve, female thread 1062404 - DN15 1062406 - DN20 1062408 - DN25 1062410 - DN32 1062412 - DN40 1062416 - DN50 HydroControl V Double regulating valve, male thread 1062604 - DN15 1062606 - DN20 1062608 - DN25 1062610 - DN32 1062612 - DN40 1062616 - DN50 HydroControl A Shutoff valve, female thread, 1067524 - DN15 1067526 - DN20 1067528 - DN25 1067530 - DN32 1067532 - DN40 1067536 - DN50 HydroControl A Shutoff valve, male thread, 1067624 - DN15 1067626 - DN20 1067628 - DN25 1067630 - DN32 1067632 - DN40 1067636 - DN50 HydroControl M Double regulating valve with metering station, female thread 1065844 - DN15 ULF 1065834 - DN15 LF 1065824 - DN15 MF 1065804 - DN15 1065806 - DN20 1065808 - DN25 1065810 - DN32 1065812 - DN40 1065816 - DN50

Manufacturer:

Oventrop GmbH & Co KG

Company Name

Oventrop GmbH & Co KG

Address

Paul-Oventrop-Strasse 1, 59939 Olsberg

Country

Germany

View All Listings by this Company

Range of swing gate, non-return valves with (blue or red epoxy powder coated) ductile iron bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2185 Valves

Section Subtitle:

Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should not be made to `Backflow Prevention Devices`.

WRAS Approval Number:

240902715

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 – 300 flanged

Marking:

RVK, PN, DN, date of manufacture (YYYY), flow arrow and technical information on body. RVK, WRAS & technical information on metal dataplate on body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

RVK ͞CVC110

Approval Holder:

Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)

Company Name

Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)

Address

PLOT 1B20,INDUSTRIAL VALLEY KING ABDULLAH ECONOMIC CITY RABIGH, JEDDAH 21911

Country

Saudi Arabia

View All Listings by this Company

Range of spring loaded, non-return valves with ductile iron bodies (blue epoxy powder coated) with stainless steel discs, springs and shafts and EPDM seat. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

2185 Valves

Section Subtitle:

Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should not be made to `Backflow Prevention Devices`.

WRAS Approval Number:

2310407

Size:

Flanged connection - DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300.

Marking:

Oventrop, DN, PN & WRAS on data plate. DN, PN & Flow arrow on body,

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

166 20 SERIES &107 26 SERIES CHECK VALVE SIZE DN 50MM-DN 300MM

Approval Holder:

Oventrop GmbH & Co KG

Company Name

Oventrop GmbH & Co KG

Address

Paul-Oventrop-Strasse 1, 59939 Olsberg

Country

Germany

View All Listings by this Company

Range of wafer or globe type spring loaded, resilient trim, non-return valves with cast iron bodies (blue epoxy powder coated). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2188 Valves

Section Subtitle:

Swing gate valve(s) with resilient trim. Can be defined as non-return valve however, does not provide sufficient protection to be considered a backflow protection device.

WRAS Approval Number:

240904730

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 to DN600

Marking:

IMI, TA, PN, DN &DATE OD MANUFATTURE YY/MM & FLOW ARROW ON BODY, WRAS, CE & MODEL ON DATA PLATE ON BODY.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

4335 TA-NRV F

Approval Holder:

IMI Hydronic Engineering

Company Name

IMI Hydronic Engineering

Address

Route de Crassier 19, CH-1262 Eysins, Switzerland

View All Listings by this Company