Range of Talbot pushfit fittings with polyprolylene or acetal bodies and EPDM o-rings for use with MDPE PE80 pipe (BS EN 12201). For use above and below ground use. Maximum working pressure 16 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2310389

Size:

See models for pushfit fittings. Copper compression fittings – 15mm & 22mm for use with copper (EN1057).

Marking:

Talbot, size and pressure rating moulded on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

Adaptor Male Thread - Type 1 Solid Body 20mm – 63mm: E6581; E6580; E6579; E6582; E9128; E3515; E3516; E10423. Adaptor Male Thread - Type 2 Cone and body 20mm – 32mm: E2729; E2371; E2732. Adaptor Female Thread - Type 1 Solid Body 20mm – 63mm: E11082; E5095; E3578; E5092; E5096; E3517; E8532; E6588; E8534; E8535; E8536. Adaptor Female Thread - Type 2 Cone and body 20mm – 32mm: E2730; E2735; E5094: E5098; E2736; E8625. Adaptor Female – Copper - Type 1 Solid Body 20mm for Above ground use ONLY: E4145. Adaptor Female – Copper - Type 2 Cone and Body 20mm - 25mm for Above ground use ONLY: E4147; E5182. Tank Connector - Type 1 Solid Body 25mm: E7248. Connector Body - Type 1 Solid Body 20mm – 63mm: E3520; E3521; E2831; E3522; E3523; E3995; E3524; E3525; E7283; E3996. Connector – Body Type 2 Cone and Body 20mm – 32mm: E2822; E2825; E2826; E2829; E2833. Equal Tee Connector - Type 1 Solid Body 20mm – 63mm: E3537; E3538; E3033; E3363; E3038; E3039; E3998; E3997. Equal Tee Connector - Type 2 Cone and Body 20mm – 32mm: E3032; E3037; E3042; E3036; E3040; E3041. Tee Connector P/f x F/Thread - Type 1 Solid Body 20mm – 63mm: E3035; E3043; E3044; E3045; E4355; E4356. Bend / Elbow Connector Body - Type 1 Solid Body 20mm – 63mm: E7734; E9010; E3518; E3519. Bend / Elbow Connector Body - Type 2 Cone and Body 20mm – 32mm: E2781; E2783; E2784. Elbow Connector Body P/F x F/Thread - Type 1 Solid Body 20mm – 63mm: E6151; E6152; E6153; E6154; E4353; E4354; E2787. Elbow Connector Body P/F x F/Thread - Type 2 Cone and Body 20mm – 32mm: E2782; E2789; 2788. Elbow Connector Body P/F x M/Thread - Type 1 Solid Body 25mm – 32mm: E4670; E4671. Stop End - Type 1 Solid Body 20mm – 63mm: E3364; E3365; E3366; E5097; E4375. Wall Plate Elbow - Type 1 Solid Body 20mm – 32mm: E2798; E2799; E2800. Repair Connector Straight - Type 1 Solid Body 20mm – 32mm: E7782; E7777; E7778.

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Manufacturer:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

JG Speedfit range of push-fit fittings and manifolds for use with Polybutylene Barrier Pipe (manufactured to BS EN 7291-2:2010 ) and PEX Barrier Pipe (manufactured to BS EN 7291-3:2010) and Copper Pipe (manufactured to BS EN1057:). Operating parameters: 12.5 bar@20°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312020

Note:

R008 to applies to models 15PWB and CM551516W

Size:

10mm – 22mm push-fit. 5/8” push-fit & ¾” push-fit. ½” & ¾” BSP.

Marking:

John Guest logo and size on body

Installation Requirements:

R001 R008

Expiry date:

31/12/2028

Model:

FEMALE COUPLER TAP CONNECTOR BSP THREAD PSE3210W 10mm x 1/2" BSP FEMALE PSE3201W 15mm x 1/2" BSP FEMALE PSE3203W 15mm x 3/4" BSP FEMALE PSE3202W 22mm x 3/4" BSP FEMALE STOP END PSE4610W 10mm PSE4615W 15mm PSE4622W 22mm PSE4628W 28mm 4 WAY MANIFOLD SFM512210E 22 x 10mm 4 PORT RAIL MANIFOLD SFM522210E 22mm x 10mm SFM522215E 22mm x 15mm BACK PLATE ELBOW 15PWB: 15mm x 1/2" BSP BULKHEAD ELBOW CM551516W: 15mm x 3/4" BSP CONVERSION CONNECTOR: NC471: ½” ID (Imperial) x 15mm Push-fit NC2324: ¾” ID (Imperial) x 22mm Push-fit

Approval Holder:

Reliance Worldwide Corporation (UK) Ltd

Company Name

Reliance Worldwide Corporation (UK) Ltd

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

Reliance Worldwide Corporation (UK) Ltd

Company Name

Reliance Worldwide Corporation (UK) Ltd

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

‘AquaGas M range’ of copper and brass press fit fittings with NBR ‘O’-rings for use with copper tube (manufactured to BS EN 1057). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312074

Size:

15 - 54mm. ½” - 2” BSP (M)/(F).

Marking:

PCC GmbH logo (PC), DVGW, size and date of manufacture (YY-MM) on fitting body.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Press-Copper AquaGas M range: Brass (15-28mm) or Copper (35-54mm) fittings: 79010: Straight Male Adapter, 79020: Straight Female Adapter. Copper fittings: 79000: Straight Coupling, 79030: Straight Reducer, 79040: Slip Coupler, 79100: Equal Tee, 79110: Reduced Tee, 79120: Female Tee, 79200: Bend 90° ff, 79210: Bend 90° mf, 79230: Bend 45° ff, 79240: Bend 45° mf, 79410: End Cap, 79430: Male Reducer.

Approval Holder:

PCC GmbH

Company Name

PCC GmbH

Address

Dusseldorfer Strasse 15, D-71332 Wailblingen

Country

Germany

View All Listings by this Company

‘SharkBite’ range of brass push fit fittings incorporating an EPDM ‘O’-ring. For use with the following pipes: JG Speedfit Layflat Polybutylene Barrier Pipe (JG BPB pipe manufactured to BS EN 7291-2:2010), 'BPEX' Barrier Pipe (JG BPEX pipe manufactured to BS EN 7291-3:2010), Polybutylene barrier pipe (manufactured to BS EN 7291-2:2010), PEX barrier pipe (manufactured to BS EN 7291-3:2010) and Copper pipe (manufactured to BS EN1057:2006). Maximum working pressures and operating temperatures: When used with Polybutylene barrier pipes (manufactured to BS EN 7291-2:2010) and PEX barrier pipes (manufactured to BS EN 7291-3:2010): 12.5 bar, cold water use only. 6.0 bar @ 95°C. When used with copper pipe (manufactured to BS EN1057:2006): 10mm sizes: Maximum working pressure 16.0 bar. Cold water use only. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C. 15-22mm sizes: Maximum working pressure 20.0 bar. Cold water use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C. 28mm size added April 2024: Maximum working pressure 20.0 bar. Cold water use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240204043

Size:

See models.

Marking:

Fittings: Sharkbite (brand of Reliance Worldwide Corporation (UK) Ltd.), Sharkbite logo, CR, size and SXXXX (where XXXX = date of manufacture WWYY). Pipe: John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd.), material type, class, size, pressure, temperature and means of identification including date of manufacture (WWYY/xxxx/xxxx). Pipe inserts: John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd.).

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

SHARKBITE EQUAL STRAIGHT COUPLINGS: SB0110: 10mm SB0115: 15mm SB0122: 22mm SB0128: 28mm SHARKBITE REDUCING STRAIGHT COUPLING: SB011510: 15mm x 10mm SB012215: 22mm x 15mm SB012822: 28mm x 22mm SHARKBITE SLIP COUPLING: SB0115S: 15mm SB0122S: 22mm SB0128S: 28mm SHARKBITE 90° EQUAL ELBOW: SB0210: 10mm SB0215: 15mm SB0222: 22mm SB0228: 28mm SHARKBITE 45° EQUAL ELBOW: SB0515: 15mm SB0522: 22mm SB0528: 28mm SHARKBITE 90° STREET ELBOW: SB0215ST: 15mm SB0222ST: 22mm SB0228ST: 28mm SHARKBITE 45° STREET ELBOW: SB0515ST: 15mm SB0522ST: 22mm SB0528ST: 28mm SHARKBITE 90° MALE ELBOW: SB121515M: 15mm SB122220M: 22mm SHARKBITE 90° FEMALE ELBOW: SB121515F: 15mm x 1/2” BSP SHARKBITE 90° FEMALE ELBOW WITH BACK PLATE: SB121515FBP: 15mm x 1/2” BSP SHARKBITE EQUAL TEE: SB0310: 10mm SB0315: 15mm SB0322: 22mm SB0328: 28mm SHARKBITE SLIP TEE: SB0315S: 15mm SB0322S: 22mm SB0328S: 28mm SHARKBITE FEMALE BRANCH TEE: SB03151515F: 15mm x 15mm x 1/2” BSP SHARKBITE REDUCED BRANCH TEE: SB03222210: 22mm x 22mm x 10mm SB03222215: 22mm x 22mm x 15mm SB03282815: 28mm x 28mm x 15mm SB03282822: 28mm x 28mm x 22mm SHARKBITE REDUCED RUN TEE: SB03221522: 22mm x 15mm x 22mm SHARKBITE REDUCED RUN AND BRANCH TEE: SB03221515: 22mm x 15mm x 15mm SB03282222: 28mm x 22mm x 22mm SHARKBITE MALE CONNECTOR TAPERED THREAD: SB111515MT: 15mm x 1/2” BSPT SB112220MT: 22mm x 3/4” BSPT SB112825MT: 28mm x 1” BSPT SHARKBITE MALE CONNECTOR PARALLEL THREAD: SB111515MP: 15mm x 1/2” BSP SB112220MP: 22mm x 3/4” BSP SB112825MP: 28mm x 1” BSP SHARKBITE MALE TANK CONNECTOR PARALLEL THREAD: SB111515MTC: 15mm x 1/2” BSP SB112220MTC: 22mm x 3/4” BSP SHARKBITE FEMALE CONNECTOR PARALLEL THREAD: SB111515F: 15mm x 1/2” BSP SB112220F: 22mm x 3/4” BSP SB112825F: 28mm x 1” BSP SHARKBITE TAP CONNECTORS: SB141515: 15mm x 1/2” BSP SB142220: 22mm x 3/4” BSP SHARKBITE TAP CONNECTOR ELBOW: SB141515E: 15mm x 1/2” BSP SHARKBITE END STOP: SB0410: 10mm SB0415: 15mm SB0422: 22mm SB0428: 28mm SHARKBITE STRAIGHT REDUCING TAILS: SB211510: 15mm x 10mm SB212215: 22mm x 15mm SB212815: 28mm x 15mm SB212822: 28mm x 22mm SHARKBITE SINGLE BRANCH MANIFOLD TEE: SB01221022ST: 22mm x 22mm x 10mm SHARKBITE DOUBLE BRANCH MANIFOLD TEE: SB0122101022ST: 22mm x 22mm x 10mm x 10mm

PIPE INSERTS: TSM10N: 10mm TSM15N: 15mm TSM22N: 22mm TSM28N: 28mm WHITE POLYBUTYLENE BARRIER PIPE (COILS ONLY): 10BPB-25C: 10mm x 25M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 10BPB-50C: 10mm x 50M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 10BPB-100C: 10mm x 100M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-25C: 15mm x 25M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-50C: 15mm x 50M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-85C: 15mm x 85M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-100C: 15mm x 100M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-120C: 15mm x 120M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-150C: 15mm x 150M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-300C: 15mm x 300M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 22BPB-25C: 22mm x 25M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 22BPB-50C: 22mm x 50M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 28BPB-50C: 28mm x 50M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE WHITE PEX BARRIER PIPE (COILS): 10BPEX-25C: 10mm x 25M COIL WHITE PEX BARRIER PIPE 10BPEX-50C: 10mm x 50M COIL WHITE PEX BARRIER PIPE 10BPEX-100C: 10mm x 100M COIL WHITE PEX BARRIER PIPE 15BPEX-25C: 15mm x 25M COIL WHITE PEX BARRIER PIPE 15BPEX-50C: 15mm x 50M COIL WHITE PEX BARRIER PIPE 15BPEX-100C: 15mm x 100M COIL WHITE PEX BARRIER PIPE 15BPEX-120C: 15mm x 120M COIL WHITE PEX BARRIER PIPE 15BPEX-150C: 15mm x 150M COIL WHITE PEX BARRIER PIPE 22BPEX-25C: 22mm x 25M COIL WHITE PEX BARRIER PIPE 22BPEX-50C: 22mm x 50M COIL WHITE PEX BARRIER PIPE WHITE PEX BARRIER PIPE (LENGTHS): 15BPEX-20X2L: 15mm x 2M LENGTHS WHITE PEX BARRIER PIPE 15BPEX-20X3L: 15mm x 3M LENGTHS WHITE PEX BARRIER PIPE 15BPEX-20X6L: 15mm x 6M LENGTHS WHITE PEX BARRIER PIPE 22BPEX-20X2L: 22mm x 2M LENGTHS WHITE PEX BARRIER PIPE 22BPEX-20X3L: 22mm x 3M LENGTHS WHITE PEX BARRIER PIPE 22BPEX-20X6L: 22mm x 6M LENGTHS WHITE PEX BARRIER PIPE 28BPEX-10X3L: 28mm x 3M LENGTHS WHITE PEX BARRIER PIPE 28BPEX-10X6L: 28mm x 6M LENGTHS WHITE PEX BARRIER PIPE

Approval Holder:

Reliance Worldwide Corporation (UK) Ltd

Company Name

Reliance Worldwide Corporation (UK) Ltd

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of Redman fittings with mild steel bodies (polyamide coating) for use with Radius Systems Puriton Light Blue Barrier Pipe [Type A, BS8588] & Puriton Dark Blue Barrier Pipe [Type A, BS8588]. For above and below ground and cold-water use. Jointing is achieved by hydraulic compression. Maximum working pressures: 12.5 Bar for 63mm SDR 11 PE80 pipe system, 10.0 Bar for 90mm to 180mm SDR 17 PE100 pipe system, 16.0 bar for 90mm to 180mm SDR 11 PE100 pipe system. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240202059

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model list below;

Marking:

Radius logo, Size, Part number and batch code on outer shell. Radius logo, size on adhesive label on body.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

Maximum working pressure 10.0 bar: Coupler comprising outer shell & straight insert for SDR 17 Pipe: RE0009: 90mm SDR 17 REDMAN Coupler, RE0010: 110mm SDR 17 REDMAN Coupler, RE0005: 125mm SDR 17 REDMAN Coupler, RE0007: 160mm SDR 17 REDMAN Coupler, RE0047: 180mm SDR 17 REDMAN Coupler. Coupler comprising 2 outer half shells and straight insert for SDR 17 Pipe: RE0067: 90mm SDR 17 REDMAN Repair Coupler, RE0069: 110mm SDR 17 REDMAN Repair Coupler, RE0071: 125mm SDR 17 REDMAN Repair Coupler, RE0078: 160mm SDR 17 REDMAN Repair Coupler, RE0080: 180mm SDR 17 REDMAN Repair Coupler. 45° bend comprising 2 outer half shells and 45° insert for SDR 17 Pipe: RE0034: 90mm SDR 17 REDMAN 45° Elbow, RE0036: 110mm SDR 17 REDMAN 45° Elbow, RE0038: 125mm SDR 17 REDMAN 45° Elbow, RE0040: 160mm SDR 17 REDMAN 45° Elbow, RE0045: 180mm SDR 17 REDMAN 45° Elbow. 90° bend comprising 2 outer half shells and 90° insert for SDR 17 Pipe: RE0013: 90mm SDR 17 REDMAN 90° Elbow, RE0015: 110mm SDR 17 REDMAN 90° Elbow, RE0017: 125mm SDR 17 REDMAN 90° Elbow, RE0019: 160mm SDR 17 REDMAN 90° Elbow, RE0021: 180mm SDR 17 REDMAN 90° Elbow, Flange Adaptor comprising outer shell and DN flanged insert for SDR 17 pipe EN1092 NP16 drilling: RE0075: 90mm x DN80 SDR 17 REDMAN Flange Adaptor, RE0077: 110mm x DN100 SDR 17 REDMAN Flange Adaptor, RE0079: 125mm x DN100 SDR 17 REDMAN Flange Adaptor, RE0081: 160mm x DN150 SDR 17 REDMAN Flange Adaptor, RE0089: 180mm x DN150 SDR 17 REDMAN Flange Adaptor. Maximum working pressure 16.0 bar: Coupler comprising outer shell & straight insert for SDR 11 Pipe: RE0002: 90mm SDR 11 REDMAN Coupler, RE0003: 110mm SDR 11 REDMAN Coupler, RE0004: 125mm SDR 11 REDMAN Coupler, RE0008: 180mm SDR 11 REDMAN Coupler. Coupler comprising 2 outer half shells and straight insert for SDR 11 Pipe: RE0064: 90mm SDR 11 REDMAN Repair Coupler, RE0066: 110mm SDR 11 REDMAN Repair Coupler. 45° bend comprising 2 outer half shells and 45° insert for SDR 11 Pipe: RE0033: 90mm SDR 11 REDMAN 45° Elbow, RE0035: 110mm SDR 11 REDMAN 45° Elbow. 90° bend comprising 2 outer half shells and 90° insert for SDR 11 Pipe: RE0012: 90mm SDR 11 REDMAN 90° Elbow, RE0014: 110mm SDR 11 REDMAN 90° Elbow. Flange Adaptor comprising outer shell and DN flanged insert for SDR 11 pipe EN1092 NP16 drilling: RE0074: 90mm x DN80 SDR 11 REDMAN Flange Adaptor, RE0076: 110mm x DN100 SDR 11 REDMAN Flange Adaptor, RE0084: 125mm x DN100 SDR 11 REDMAN Flange Adaptor, RE0087: 180mm x DN150 SDR 11 REDMAN Flange Adaptor Models added July 2024: RE0001 63mm REDMAN Coupler SDR 11, RE0065 63mm REDMAN Repair Coupler SDR 11, RE0032 63mm REDMAN Elbow 45° SDR11, RE0011 63mm REDMAN Elbow 90° SDR 11, RE0073 63 x dn50 REDMAN Flange Adaptor SDR 11, RE0083 63mm x dn80 REDMAN Flange adaptor SDR11.

Approval Holder:

Radius Systems Limited

Company Name

Radius Systems Limited

Address

Radius House, Berristow Lane, South Normanton, Alfreton, Derbyshire

Postcode

DE55 2JJ

Country

United Kingdom

Phone

01773582303

General Email

richard.marks@radius-systems.com

View All Listings by this Company

Manufacturer:

Radius (China) Piping Systems Company Limited.

Company Name

Radius (China) Piping Systems Company Limited.

Address

53 Huihe Road Dongying Economic and Technological Development Zone Shandong Province

Country

China

General Email

View All Listings by this Company