Range of flow switches with brass bodies incorporating EPDM ‘O’-rings, acting as a leak detection system that actuates an integral spherical valve to shut off the water supply. The inlet incorporates a stainless steel strainer. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 30°C.

Section:

1719 Flow Activated Switches

WRAS Approval Number:

2012087

Note:

Cannot be used as the main stop valve into a premises. The fitting listed on this approval has been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed.

Size:

¾”, 1” & 1¼” BSP (M) inlet/outlet.

Marking:

RELIANCE VALVES ON PLASTIC COVER

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

LEKP100001 - ¾, LEKP100002 1” & LEKP100003 1¼ FLOW ACTIVATED SWITCHES

Product Images

Manufacturer:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

View All Listings by this Company

Range of normally closed solenoid valves with brass bodies, stainless steel spring, EPDM seal and diaphragm. Maximum working pressure 9.80665 bar. Maximum operating temperature 85°C.

Section:

2230 Valves

Section Subtitle:

Solenoid, metal.

WRAS Approval Number:

2104075

Size:

See model.

Marking:

GOLD SEAL VALVES (BRAND OF S&S NORTHERN) WRAS, PRESSURE & SIZE ON ADHESIVE LABEL ON BODY

Installation Requirements:

R001

Expiry date:

30/04/2026

Model:

GSW13-230VAC GSW13-24VDC GSW13-24AC GSW20-230VAC GSW20-24VDC GSW20-24VAC GSW25-230VAC GSW25-24VDC GSW25-24VAC GSW35-230VAC GSW35-24VDC GSW35-24VAC GSW40-230VAC GSW40-24VDC GSW40-24VAC GSW50-230VAC GSW50-24VDC GSW50-24VAC First XX = size WSLP1DF-XXXXX-E1-XX-03-X models -A = 1/8” -B = 1/4” WSLP1DF-XXXXX-E1-XX-XX-X models -C = 3/8” -D = 1/2” -E = 3/4” -G = 1” WZS1DF-XXXXX-E9-XX-XX-X models -B = 1/4” -C = 3/8” -D = 1/2” WZS1DF-XXXXX-E1-XX-XX-X models -C = 3/8” -D = 1/2” -E = 3/4” -G = 1” Second XX or 03 = flow path (mm) WSLP1DFXXXXXE1-XX-03-X models -03 = 3.0mm WSLP1DF-XXXXX-E1-XX-XX-X models -13 = 13.0mm -20 = 20.0mm -25 = 25.0mm WZS1DF-XXXXX-E9-XX-XX-X models -10 = 10.0mm -13 = 13.0mm WZS1DF-XXXXX-E1-XX-XX-X models -15 = 15.0mm -20 = 20.0mm -25 = 25.0mm X = screw thread -N = US standard NPT connection -P = PT screw thread connection -R = RC screw thread connection -Blank = G thread

Product Images

Approval Holder:

S & S NORTHERN LIMITED (GOLDSEAL VALVES LIMITED)

Company Name

S & S NORTHERN LIMITED (GOLDSEAL VALVES LIMITED)

Address

UNIT 1-4 ROUNDHOUSE COURT CHORLEY LANCS

Postcode

PR7 7JN

View All Listings by this Company

Range of spherical valves with stainless steel bodies, PTFE seats and silicone O-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

240202096

Size:

½” BSP (F) - 2” BSP (F)

Marking:

Gold Seal, model & pressure on adhesive label on body.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

GSW-A15-230 GSW-A20-230 GSW-A25-230 GSW-A32-230 GSW-A40-230 GSW-A50-230 GSW-A15-24 GSW-A20-24 GSW-A25-24 GSW-A32-24 GSW-A40-24 GSW-A50-24

Approval Holder:

S&S Northern (Brand Goldseal Valves)

Company Name

S&S Northern (Brand Goldseal Valves)

Address

Unit 1-4 , Roundhouse Court, Chorley

Postcode

PR7 7JN

Country

United Kingdom

View All Listings by this Company