Range of three-hole, single outlet (fixed) wall mounted, concealed tap assemblies, (brass bodies - various trim sets). Product is supplied with a rough in set BDM-MIX-C309-T2 and external trim (see models). Incorporating quarter turn ceramic disc headworks and dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

260308001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) x ½” BSP (F) Rough, ½” BSP (M) trim sets for insertion into rough set.

Marking:

B, on the rough in set, and Bagnodesign on escutcheon or operating member.

Installation Requirements:

R001 R010 R040

Expiry date:

31/03/2031

Model:

BDM-MIX-C309-T2 + BDM-CRL-E309-XX Carlyle 160mm spout. BDM-MIX-C309-T2 + BDM-CRL-E309LS-XX Carlyle 210 mm spout. BDM-MIX-C309-T2 + BDM-FTY-E309-XX Fonteyn. BDM-MIX-C309-T2 + BDM-TKG-E309-XX TOKO Groove flat spout. BDM-MIX-C309-T2 + BDM-TKG-E310-XX TOKO Groove round spout. BDM-MIX-C309-T2 + BDM-TOK-A-E309-XX TOKO XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

General Email

dan@sanipexgroup.com

View All Listings by this Company

Range of wall mounted, concealed, manually operated blending valves, (brass bodies - various finish trim kits), incorporating ceramic cartridge headworks with single lever operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

260308002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

BDM-MIX-C410-T1 - ½’’ BSP (F), BDM-MIX-C315-C410-T2 - ½” BSP (F).

Marking:

BAGNODESIGN on faceplate.

Installation Requirements:

R001 R010 R040

Expiry date:

31/03/2031

Model:

BDM-MIX-C410-T1 concealed rough for use with- BDM-CND-E410-XX Conrad trim set BDM-MEZ-E410-B-XX Mezzanine trim set BDM-MLP-E410-XX M-Line Diffusion trim set BDM-NAR-E410-CP Nara trim set BDM-VIT-E410-XX Vitesse trim set BDM-MIX-C315—C410-T2 concealed rough for use with – BDM-BIS-E410L-XX Bristol trim set BDM-CRL=E410-XX Carlyle trim set BDM-FTY-E410-XX Fonteyn trim set BDM-MLJ-E410-XX M-Line trim set BDM-REV-E410-XX Revolution trim set BDM-TOK-E410-XX Toko trim set XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C).

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

General Email

dan@sanipexgroup.com

View All Listings by this Company

Two-hole, deck mounted, single outlet (fixed) combination tap assembly, (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The product is supplied with metal back nuts, a plastic aerator and stainless steel braided EPDM lined interconnecting hoses. Maximum working pressure: 5.0 bar. Maximum operating temperature: 60°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

260308003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

Bagnodesign on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/03/2031

Model:

BDM-FTY-304-XX XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C).

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

General Email

dan@sanipexgroup.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies, (brass bodies – various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

260308004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided, PEX lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.

Marking:

BAGNODESIGN on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/03/2031

Model:

BDM-CRL-301S-XX BDM-CRL-302S-XX BDM-FTY-301S-XX BDM-TKG-301S-XX BDM-TKG-302S-XX BDM-TOK-301S-XX BDM-TOK-302S-XX XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

General Email

dan@sanipexgroup.com

View All Listings by this Company

Wall mounted, manually operated, blending valve (brass body - various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The inlets incorporate NBR washers with stainless steel mesh strainers. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C.

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

260308008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) x ½” BSP (M) offset union.

Marking:

Bagnodesign on body.

Installation Requirements:

R001 R010 R040

Expiry date:

31/03/2031

Model:

BDM-GIN-324-XX XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

General Email

dan@sanipexgroup.com

View All Listings by this Company