BAGNODESIGN (SANIPEXGROUP) Approvals


#251202726

Range of WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
251202726
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
BAGBODESIGN & model inside cistern, 6 litre line inside cistern.
Installation Requirements:
R001 R556
Expiry date:
31/12/2030
Model:
BAGNODESIGN BDS-K133-A01-ESG6

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#260102705

Range of WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
260102705
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Bagnodesign and model inside cistern, 6 litre line inside cistern.
Installation Requirements:
R001 R556 R571
Expiry date:
31/01/2031
Model:
BAGNODESIGN BDS-K301-A01-ESG6 & BDS-K301-D01-ESG4

Print This Approval


#260108003

A concealed valve with brass body incorporating a ceramic disk headwork and dome type operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 60⁰C.

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
260108003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
BAGNODESIGN on the Escucheon and flow arrow and size on the body.
Installation Requirements:
R001 R040
Expiry date:
31/01/2031
Model:
Toko groove - BDM-TKG-440

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#260102726

Range of WC flushing cisterns incorporating a side entry (delayed action) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The float operated valve incorporates a flow restrictor on the inlet. The cistern is operated by an optional manual dual push button and incorporates a servicing valve on the inlet supply. The waste elbow on model BDS-K210-A01-ESG6 is optional. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
260102726
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
BAGNODESIGN on cistern cover. BANGNODESIGN model and 6 litre line inside cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
31/01/2031
Model:
BAGNODESIGN BDS-K210-A01-ESG6 & BAGNODESIGN BDS-K210-D03-ESG3

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#2211383

Section:
2010 Shower Valves
Description:
A Shower valve(s) with thermostatic temperature control
Does not include hose and handset.
Size:
3/4” BSP (F) captive nuts. Supplied with ½” x ¾” BSP (M) offset unions.
Marking:
BAGNODESIGN ON MIXER BODY
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2027
Model:
BDM-MLI-T401-XX

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
BDM-MLI-T401-XX bar °CBAGNODESIGNOn Mixer BodyNo

Notes & Further Information

XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)


Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 11 of 13

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.