Range of wall mounted thermostatic blending valves with chrome plated brass bodies and ceramic disc headwork with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge also with a dome type operating member. Inlets incorporate single check valve cartridges however, the complete assembly has not been tested to demonstrate it provides adequate backflow protection. The products are supplied with a shower hose and handset. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250902021

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP x ¾” BSP offset union

Marking:

Villeroy & Boch on valve body, shower handset, shower head and shower hose.

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Model:

TVS000043000XX TVS108017000XX TVS000030000XX TVS108021000XX TVS000031000XX TVS000032000XX TVS000033000XX XX at the end indicates the finish of surfaces that are not in contact with water, and can be replaced with any of the following: 61 - Chrome, K5 - Matt black, 76 - Brushed gold, 64 - Brushed nickel

Product Images

Manufacturer:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Phone

+49 151 16775778

View All Listings by this Company

Section:

0531 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)

Wall Mounted Undefinable Air Gap - See IRN's

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Notes & Further Information

Where xx denotes the surface finish (which is a non-water contact part) 61 = Chrome, 74 = Brushed Chrome, 64 = Brushed Nickel Matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, K5 = Matt black, 70 = Dune, 63 = Graphite

Product Images

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Section:

0531 Combination Tap Assemblies

Description:

A Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)

Wall Mounted Undefinable Air Gap - See IRN's

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Notes & Further Information

Where xx denotes the surface finish (which is a non-water contact part) 61 = Chrome, 74 = Brushed Chrome, 64 = Brushed Nickel Matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, K5 = Matt black, 70 = Dune, 63 = Graphite

Product Images

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Range of floor mounted, single hole, single outlet fixed combination tap assembly (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The outlet to the shower incorporates an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates an aerator. These products are not supplied with shower handset and hose. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C.

Section:

0465 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

251004004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP(F)

Marking:

Villeroy & Boch logo on operating member

Installation Requirements:

R001 R010 R040

Expiry date:

31/10/2030

Model:

TVT111004000XX FLOOR STANDING BATH MIXER TVC00046500000 Basic set: TVC00046500000 to be used in conjunction with TVT111004000XX. XX stands for the surface finishing: 61 - Chrome, K5 - Matt black, 76 - Brushed gold, 64 - Brushed nickel.

Product Images

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Section:

0695 Combination Tap Assemblies

Description:

A Range of Spout outlet(s).

Wall mounted. Kit also includes operating lever and finishing fittings. Products must be used in conjunction with concealed core valve unit ‘A1313NU Kit 1’ (not included as part of this approval).

Installation Requirements:

R001 R010 R040

Expiry date:

30/11/2030

Notes & Further Information

XX at the end indicates the Finish of surfaces that are not in contact with water (61 - Chrome, K5 - Matt black, 76 - Brushed gold, 64 - Brushed nickel).

Product Images

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company