Range of wall hung concealed WC flushing cisterns with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

240602701

Size:

½” BSP (M)

Marking:

Ecotech logo and model name on cover, 6 litre line inside cistern

Installation Requirements:

R001 R280 R556 R581

Expiry date:

30/06/2029

Model:

B685 B695

Product Images

Approval Holder:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Manufacturer:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Range of side and bottom entry BS1212-3 inlet valves, with plastic bodies and brass shanks. Maximum working pressure: 3.0 Bar low pressure and 14.0 bar high pressure Maximum operating temperature: Cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

240702703

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

For use with a float complying with BS 2456, which is not part of this approval.

Size:

½” BSP (M)

Marking:

BS1212-3 on nut. EcoTech and product code on side of valve.

Installation Requirements:

R001 R550 R560

Expiry date:

31/07/2029

Model:

B3012 & B3013

Product Images

Approval Holder:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Manufacturer:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Range of bottom entry BS1212-4 (2016) delayed or non delayed (all models)action type float operated valves for WC flushing cisterns. Maximum working pressure 10.0 Bar, cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

251202702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

WDI logo, ECO and model on float, BS1212-4 on body of inlet valve.

Installation Requirements:

R001 R550 R560

Expiry date:

31/12/2030

Model:

B3861 Bottom entry inlet valve with G1/2” plastic thread B3861 Bottom entry inlet valve with G1/2” brass thread B3862 Bottom entry inlet valve with G1/2” plastic thread B3862 Bottom entry inlet valve with G1/2” brass thread B3863 Bottom entry inlet valve with G1/2” plastic thread B3863 Bottom entry inlet valve with G1/2” brass thread

Approval Holder:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Manufacturer:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Range of side entry BS1212-4 (2016), delayed action or non-delayed action type float operated valves for WC flushing cisterns. The inlet incorporates an optional flow restrictor. Maximum working pressure 10.0 Bar Maximum operating temperature Cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

251102002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Model B3230 can be supplied with either a brass or plastic ½” connection, a plastic 3/8” connection and either delayed or non-delayed action type float valve.

Size:

3/8” BSP (M) 1/2” BSP (M) (brass or plastic inlet connection)

Marking:

WDI, Model number, WRAS, BS1212-4 and datum level on valve body

Installation Requirements:

R001 R550

Expiry date:

30/11/2030

Model:

B3230

Manufacturer:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Range of dual flush WC outlet valves operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

250902710

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” BSP (M)

Marking:

WDI, model & WRAS on body.

Installation Requirements:

R001 R556 R571

Expiry date:

30/09/2030

Model:

B4900-U B4900-G B4900H-U B4900H-G

Product Images

Range of dual flush, WC outlet valves. Each valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

251202707

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

62mm OD

Marking:

WDI, ECO, model & WRAS on body.

Installation Requirements:

R001 R556 R571

Expiry date:

31/12/2030

Model:

K4050-G-YYB1, K4050-G-YYB2, K4050-G-YYB3 & K4050-G-YYB4

Approval Holder:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Manufacturer:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Range of WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

251202711

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

WDI, ECO and model inside cistern, 6 litre line inside cistern. WDI on operation member

Installation Requirements:

R001 R556

Expiry date:

31/12/2030

Model:

K133-A01-E01002 K133-A01-E01003 K133-A02-E01002 K133-A02-E01003 K133-D01-E01002 K133-D01-E01003

Approval Holder:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company