Range of bib taps with DZR brass bodies. The inlet and the outlet of the tap incorporates approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1750 Taps

Section Subtitle:

Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.

WRAS Approval Number:

2104341

Expiry date:

30/04/2026

Size:

Please see model

Marking:

TS, date of manufacture (MMYY), size & ‘CR’ on body.

Installation Requirements:

R001 R040

Model:

84080: ½” BSP (M). 44121: ¾” BSP (M).

Factor:

TOOLSTATION LTD

Company Name

TOOLSTATION LTD

Address

EXPRESS PARK BRISTOL ROAD BRIDGEWATER

Postcode

TA6 4RN

View All Listings by this Company

Range of wall mounted hose union tap brass body incorporating a non-rising spindle headwork with a butterfly handle operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1780 Taps

Section Subtitle:

Hose union, metal. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building. Where in existing house installations a hosepipe is to be used from an existing hose union tap located outside a house and which is not provided with backflow protection, either: a. The existing hose union tap should be provided with a double check valve (Type EC or ED) located inside the building; or b. The tap should be replaced with a hose union tap that incorporates a double check valve (type HUK1); or c. A hose union backflow prevention (Type HA) or a double check valve should be continuously fitted to the outlet of the tap; or d. Is legally installed in any premises.

WRAS Approval Number:

2104066

Expiry date:

30/04/2026

Size:

¾” BSP male inlet x 19mmØ hose outlet

Marking:

TS,size & date of manufacture MM/YY body.

Installation Requirements:

R001 R040

Model:

46332

Factor:

TOOLSTATION LTD

Company Name

TOOLSTATION LTD

Address

EXPRESS PARK BRISTOL ROAD BRIDGEWATER

Postcode

TA6 4RN

View All Listings by this Company

Range of two hole, single outlet, (fixed) combination tap assemblies (chromium plated brass), Models 49723, 26684 & 18193 incorporate a non rising spindle headwork with dome type operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. . Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed.

WRAS Approval Number:

2108804

Expiry date:

31/08/2026

Size:

¾” BSP (M)

Marking:

ebb & flo on body

Installation Requirements:

R001 R009 R010

Model:

49723 Contract Bath Mixer Tap, 18193 Traditional Bath Filler & 26684 Solva Bath Filler COMBINATION TAP ASSEMBLIES

Factor:

TOOLSTATION LTD

Company Name

TOOLSTATION LTD

Address

EXPRESS PARK BRISTOL ROAD BRIDGEWATER

Postcode

TA6 4RN

View All Listings by this Company

Range of pillar taps with brass bodies (various finishes) incorporating non-rising spindle headworks using either dome type or cross top operating members. Spout outlets incorporate plastic flow straighteners. The products are also supplied with metal back nuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:

1800 Taps

Section Subtitle:

Pillar, metal.

WRAS Approval Number:

2108805

Expiry date:

31/08/2026

Size:

See model

Marking:

ebb & flo on rear of body.

Installation Requirements:

R001 R006

Model:

½” BSP (M) 82199 Contract Basin Taps 77855 Solva Basin Taps 60283 Traditional Basin Taps 87748 Cross Head Basin Taps ¾” BSP (M) 90734 Contract Bath Taps 76111 Solva Bath Taps 25022 Traditional Bath Taps

Factor:

TOOLSTATION LTD

Company Name

TOOLSTATION LTD

Address

EXPRESS PARK BRISTOL ROAD BRIDGEWATER

Postcode

TA6 4RN

View All Listings by this Company