Range of single hole single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork or quarter turn ceramic disc headwork (with a single lever operating member. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1907918

Expiry date:

31/07/2024

Size:

Stainless steel braided EPDM lined hose assemblies with ½” BSP female captive nut end connections

Marking:

INFINITA REGISTERED TRADEMARK OF FORTIS ON BASE OF TAP BODY OR OPERATING MEMBER

Installation Requirements:

R001 R006 R010

Model:

INF-AGU-001 & INF-AZA-001

Factor:

FORTIS MERCHANTS LTD

Company Name

FORTIS MERCHANTS LTD

Address

SUSSEX HOUSE QUARRY LANE

Postcode

PO19 8PE

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1907919

Expiry date:

31/07/2024

Size:

Stainless steel braided EPDM lined hose assemblies with ½” BSP female captive nut end connections

Marking:

INFINITA REGISTERED TRADEMARK OF FORTIS ON BASE OF TAP BODY

Installation Requirements:

R001 R006 R010

Model:

INF-VID-001

Factor:

FORTIS MERCHANTS LTD

Company Name

FORTIS MERCHANTS LTD

Address

SUSSEX HOUSE QUARRY LANE

Postcode

PO19 8PE

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (Chromium plated brass), incorporating ¼” turn ceramic disk headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1910911

Expiry date:

31/10/2024

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP captive nut end connections

Marking:

INFINITA (REGISTERED TRADEMARK OF FORTIS) ON BASE OF TAP BODY

Installation Requirements:

R001 R006 R010

Model:

INF-LUV-001

Factor:

FORTIS MERCHANTS LTD

Company Name

FORTIS MERCHANTS LTD

Address

SUSSEX HOUSE QUARRY LANE

Postcode

PO19 8PE

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1910912

Expiry date:

31/10/2024

Size:

Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.

Marking:

INFINITA (REGISTERED TRADEMARK OF FORTIS) ON BASE OF TAP

Installation Requirements:

R001 R006 R010

Model:

INF-HIE-001

Factor:

FORTIS MERCHANTS LTD

Company Name

FORTIS MERCHANTS LTD

Address

SUSSEX HOUSE QUARRY LANE

Postcode

PO19 8PE

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (Chromium plated brass), incorporating either a ceramic cartridge headwork (INF-VIV-001) with a single lever operating member or ¼ turn ceramic disc headworks (INF-VIE-001) with a dome type operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1911906

Expiry date:

30/11/2024

Size:

Stainless steel braided EPDM lined hose assemblies incorporating ½” captive nut end connections

Marking:

INF-VIV-001 - INFINITA REGISTERED TRADEMARK OF FORTIS ON OPERATING MEMBER INF-VIE-001 - INFINITA REGISTERED TRADEMARK OF FORTIS ON BODY

Installation Requirements:

R001 R006 R010

Model:

INF-VIV-001 INF-VIE-001

Factor:

FORTIS MERCHANTS LTD

Company Name

FORTIS MERCHANTS LTD

Address

SUSSEX HOUSE QUARRY LANE

Postcode

PO19 8PE

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001905

Expiry date:

31/01/2025

Size:

Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connection.

Marking:

INFINITA REGISTERED TRADEMARK OF FORTIS ON BODY

Installation Requirements:

R001 R006 R010

Model:

INF-COR-001

Manufacturer:

FORTIS MERCHANTS LTD

Company Name

FORTIS MERCHANTS LTD

Address

SUSSEX HOUSE QUARRY LANE

Postcode

PO19 8PE

View All Listings by this Company

Two hole, single outlet, fixed combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose, shower handset and metal backnuts, Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.

WRAS Approval Number:

2110102

Expiry date:

31/10/2026

Size:

¾” BSP (M).

Marking:

Infinita on body

Installation Requirements:

R001 R006 R020

Model:

INF-GRD-003 Shower Mixer

Factor:

FORTIS MERCHANTS LTD

Company Name

FORTIS MERCHANTS LTD

Address

SUSSEX HOUSE QUARRY LANE

Postcode

PO19 8PE

View All Listings by this Company