Zip Heaters UK Ltd T/A Zip Water UK Approvals


#1905042

‘Zip Aquapoint IV’ range of wall mounted directly heated unvented storage vessels (cased and insulated) incorporating an enamel lined cylinder and safety kit. The cylinder is factory fitted with a temperature and pressure relief valve. An inlet manifold is supplied incorporating a 6.0 bar expansion relief valve, a pressure reducing valve pre-set at 3.0 bar, a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and a stainless-steel strainer. An expansion vessel is also supplied. Maximum working pressure 5.5 bar. Maximum operating temperature 70°C.

Section:
1380 Heaters
Section Subtitle:
Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
1905042
Expiry date:
31/05/2024
Size:
½” BSP (M) inlet and outlets.
Marking:
Zip and technical information (including maximum working pressure and capacity) on adhesive label on body.
Installation Requirements:
R001
Model:
Zip Aquapoint IV range consisting of models: AP430S - 30L Direct, AP450S - 50L Direct, AP480S - 80L Direct & AP4100S - 100L Direct.
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company

Print This Approval


#2204029

Range of wall mounted, electrically heated catering water boilers. The boilers incorporate stainless steel storage tanks with stainless steel vent and overflow and silicon washers and gaskets, fed via a solenoid valve. The water is discharged via a self-closing tap with single lever operating member. The solenoid valve incorporates a plastic strainer at the inlet. Maximum working pressure 7.0 bar. Maximum operating temperature 98°C.

Section:
0060 Boilers
Section Subtitle:
Catering, Feed Cistern or Pressure.
WRAS Approval Number:
2204029
Expiry date:
30/04/2027
Note:
Please note that IRN R150 applies only to boilers with a capacity which is greater than 15 litres.
Size:
15mm pushfit inlet
Marking:
Instanta on front of unit. Instanta, max/min pressure and technical information on adhesive label on bottom of unit.
Installation Requirements:
R001 R040 R150
Model:
WMS2 (WA2N) – SureFlow Wall Mounted 2.5 Litre WMS5 (WA5N) - SureFlow Wall Mounted 5 Litre WMS10 (WA10N) - SureFlow Wall Mounted 10 Litre HS001UK – 1.5 Ltr Instant On-Wall Boiling Water Heater in White WMSP3W (WM3) – SureFlow Plus Wall Mounted 3 Litre White WMSP3 (WM3SS) - SureFlow Plus Wall Mounted 3 Litre WMSP7W (WM7) - SureFlow Plus Wall Mounted 7.5 Litre White WMSP7 (WM7SS) - SureFlow Plus Wall Mounted 7.5 Litre WMSP15 (WM15-3SS) - SureFlow Plus Wall Wall Mounted 15 Litre WMSP15/6 (WM15-6SS) – SureFlow Plus Wall Mounted 15 Litre 6kW WMSP25 (WM25SS) – SureFlow Plus Wall Mounted 25 Litre
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Instanta Ltd
Company Name
Instanta Ltd
Address
Canning Road Southport Merseyside
Postcode
PR9 7SN
Phone
01704 501114

View All Listings by this Company

Print This Approval


#2207038

Range of electric instantaneous water heaters. The DEX and DCX models incorporate a spherical ball valve on the inlet. The CEX and DEX models incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlet incorporates a strainer. Maximum working pressure 10 bar (DEX models only) All other models open outlet. Maximum operating temperature: ES3/4/5 and Zip Hydrotap G4/G5 ranges – 65ºC. CEX, DEX and DCX ranges - 70°C.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2207038
Expiry date:
31/07/2027
Size:
ES, Zip HydroTap and CEX models - ½” BSP male inlet and outlet. DEX and DCX models- 3/8” BSP captive nut inlet and outlet that connects to a valve with a ½” BSP male inlet.
Marking:
Zip inline and Clage on front cover. Zip inline, model, Maximum temperature and pressure and technical information on label on body.
Installation Requirements:
R001 R040
Model:
ES3 ES4 ES6 CEX CEX-U DEX12 NEXT DCX NEXT ZIP HydroTap G4 & G5 booster
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Clage GmbH
Company Name
Clage GmbH
Address
PIROLWEG 1 5 21337 LUENEBURG GERMANY

View All Listings by this Company

Print This Approval


#2209008

‘Aquapoint APIII’ range of direct unvented under basin or over basin (wall mounted) electrically heated, enamel lined insulated steel storage cylinders. The cylinders are supplied with an expansion relief valve set at 6.0 bar. Maximum working pressure 5.5 bar. Maximum operating temperature 75°C.

Section:
1380 Heaters
Section Subtitle:
Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2209008
Expiry date:
30/09/2027
Size:
½” BSP (M) inlet and outlet.
Marking:
Zip Aquapoint on body. Zip Water, Aquapoint, capacity and other technical information on adhesive label on body.
Installation Requirements:
R001 R040
Model:
Under basin (models): AP3/05, AP3/10 & AP3/15. Over basin (wall mounted) models: AP3/05/OB, AP3/10/OB & AP3/15/OB. Where 05, 10 & 15 indicate capacity in litres.
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Tiki Doo Stara Pazova
Company Name
Tiki Doo Stara Pazova
Address
Golubinacki Put 1B Stara Pazova 22300 Serbia

View All Listings by this Company

Print This Approval


#2209030

Varipoint range of unvented water heaters with copper bodies, fitted with a temperature & pressure relief valve (7.0 bar) and supplied with a pressure relief valve (6.0 bar). Maximum working pressure 5.5 bar. Maximum operating temperature 85°C.

Section:
1380 Heaters
Section Subtitle:
Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2209030
Expiry date:
30/09/2027
Size:
½” BSP male inlet and outlet.
Marking:
ZIP Varipoint and product info on adhesive label.
Installation Requirements:
R001
Model:
VP103 – Varipoint II Overbasin 10ltr VP103UB – Varipoint II Underbasin 10ltr VP153 – Varipoint II Overbasin 15ltr VP153UB – Varipoint II Underbasin 15ltr
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 4

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.