Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge or ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1912068

Expiry date:

31/12/2024

Size:

Stainless steel PEX lined hose assemblies with ½” BSP captive nut end connections

Marking:

THE TAP FACTORY LOGO ON REAR OF TAP BODY

Installation Requirements:

R001 R006 R010

Model:

TFVIBTA1 & TFVIBTAP2 combination tap assemblies

Factor:

THE TAP FACTORY

Company Name

THE TAP FACTORY

Address

20 WHITCLIFFE ROAD CLECKHEATON WEST YORKSHIRE

Postcode

BD19 3NU

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. This product also incorporates an additional spring-loaded quarter turn ceramic disc headwork with a single lever operating member for filtered cold water discharged from the spout outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2205092

Expiry date:

31/05/2027

Note:

R009 only applies to models with PEX lined hoses

Size:

Stainless steel braided PEX or EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections (see models).

Marking:

The Tap Factory logo on body

Installation Requirements:

R001 R006 R007 R009 R010

Model:

TFHOTTAP11 TFHOTTAP2 TFHOTTAP7 TFHOTTAP18 TFHOTTAP19 TFHOTTAP20 TFHOTTAP21 TFHOTTAP22 TFHOTTAP23 TFHOTTAP24 TFHOTTAP25 TFHOTTAP26 TFHOTTAP4 TFHOTTAP3 TFHOTTAP5 TFHOTTAP16 TFHOTTAP6 TFHOTTAP27 TFHOTTAP28 TFHOTTAP15 TFHOTTAP14 TFHOTTAP20 TFHOTTAP10 TFHOTTAP12 TFHOTTAP8 TFHOTTAP1 TFHOTTAP9 TFHOTTAP29 TFHOTTAP17

Factor:

THE TAP FACTORY

Company Name

THE TAP FACTORY

Address

20 WHITCLIFFE ROAD CLECKHEATON WEST YORKSHIRE

Postcode

BD19 3NU

View All Listings by this Company