BAGNODESIGN Approvals


#2212352

Range of single hole, single outlet fixed combination tap assemblies (brass body - various finishes), incorporating a ceramic cartridge headwork with either a single lever or cross top operating member. The spout outlets incorporate a plastic aerator. Products are supplied with PEX inner-lined grey plastic braided inlet hoses. Maximum working pressure 10 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2212352
Expiry date:
31/12/2027
Size:
½” BSP captive nut.
Marking:
Bagnodesign on tap body
Installation Requirements:
R001 R006 R009 R010
Model:
BDM-CLI-401S-CP (Chrome Plated), BDM-CLI-401S-NB (Brushed Nickel), C-LINE SINGLE, BDM-MLP-301S-CP (Chrome Plated), BDM-MLP-301S-MG (Matt Grey), BDM-MLP-301S-NB (Brushed Nickel), BDM-MLP-301S-MB (Matt Black) M-LINE PROJECT Model added January 2024 PROJECT MONO BASIN MIXER BDM-PRO-111183-A-XX XX’ denotes finish and is replaced with: Chrome Brushed Nickel Matt Black Anthracite Lacquered Zanzibar Gold PVD Gold Soft Bronze Santiago Oyster Burgundy
Factor:
BAGNODESIGN
Company Name
BAGNODESIGN
Address
UNIT 1 OAKWELL PARK TRADING ESTATE BIRSTALL
Postcode
WF17 9LU

View All Listings by this Company

Print This Approval


#2303372

Series of wall mounted, thermostatic mixer valve with brass bodies, diverter headwork that controls flow between one, two or three outlets (see model) with various type of operating member. The temperature is controlled independently via a thermostatic cartridge operating member with a manual override button. Inlets incorporate a stainless-steel strainer and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 55°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2303372
Expiry date:
31/03/2028
Size:
¾” BSP(F)
Marking:
Bagnodesign on backplate
Installation Requirements:
R001 R040
Model:
BDM-UNI-T301-CON-CP (CHROME PLATED) BDM-UNI-T301-CON-NB (BRUSHED NICKEL) BDM-UNI-T301-CON-MB (MATT BLACK) UNIVERSAL CONCEALED PART FOR THERMOSTATIC SHOWER MIXER WITH 1 OUTLET BDM-UNI-T302-CON-CP (CHROME PLATED) BDM-UNI-T302-CON-NB (BRUSHED NICKEL) BDM-UNI-T302-CON-MB (MATT BLACK) UNIVERSAL CONCEALED PART FOR THERMOSTATIC SHOWER MIXER WITH 2 OUTLETS BDM-UNI-T303-CON-CP (CHROME PLATED) BDM-UNI-T303-CON-NB (BRUSHED NICKEL) BDM-UNI-T303-CON-MB (MATT BLACK) UNIVERSAL CONCEALED PART FOR THERMOSTATIC SHOWER MIXER WITH 3 OUTLETS
Factor:
BAGNODESIGN
Company Name
BAGNODESIGN
Address
UNIT 1 OAKWELL PARK TRADING ESTATE BIRSTALL
Postcode
WF17 9LU

View All Listings by this Company

Print This Approval


#1909437

Revolution range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator which also incorporates a stainless steel mesh. The BDM-REV-301 models are supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1909437
Expiry date:
30/09/2024
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Bagnodesign on body.
Installation Requirements:
R001 R006 R009 R010
Model:
M-LINE MONO SMOOTH BODIED BASIN MIXER (Smooth Handle) BDM-MLI-301S-CP (CHROME PLATED) BDM-MLI-301S-NB (BRUSHED NICKEL) BDM-MLI-301S-CR (BRUSHED COPPER) BDM-MLI-301S-BK (MATT BLACK) BDM-MLI-301S-LZ (LACQUERED ZANZIBAR) BDM-MLI-301S-AN (ANTHRACITE) BDM-MLI-301S-OYS (OYSTER PVD CHAMPAGNE GOLD) M-LINE MONO BASIN MIXER WITH POP-UP WASTE BRUSHED (Smooth Handle) BDM-MLI-111515-A-CP (CHROME PLATED) BDM-MLI-111515-A-NB (BRUSHED NICKEL) BDM-MLI-111515-A-CR (BRUSHED COPPER) BDM-MLI-111515-A-BK (MATT BLACK) BDM-MLI-111515-A-LZ (LACQUERED ZANZIBAR) BDM-MLI-111515-A-AN (ANTHRACITE) BDM-MLI-111515-A-OYS (OYSTER PVD CHAMPAGNE GOLD) M-LINE MONO SMOOTH BODIED BASIN MIXER (Smooth Handle + RED & BLUE MARKINGS) BDM-MLI-PRO301S-CP (CHROME PLATED) REVOLUTION MONO BASIN MIXER WITH POP-UP WASTE (Knurled Handle) BDM-REV-301-OYS (OYSTER PVD CHAMPAGNE GOLD) M-LINE MONO TALL SMOOTH BODIED BASIN MIXER (Smooth Handle) BDM-MLI-111564-A-CP (CHROME PLATED) BDM-MLI-111564-A-NB (BRUSHED NICKEL) BDM-MLI-111564-A-CR (BRUSHED COPPER) BDM-MLI-111564-A-BK (MATT BLACK) BDM-MLI-111564-A-LZ (LACQUERED ZANZIBAR) BDM-MLI-111564-A-AN (ANTHRACITE) BDM-MLI-111564-A-OYS (OYSTER PVD CHAMPAGNE GOLD) REVOLUTION MONO TALL SMOOTH BODIED BASIN MIXER (Knurled Handle) BDM-REV-302S-OYS (OYSTER PVD CHAMPAGNE GOLD) Model Added November 2023 BRISTOL MONO SMOOTH BODIED BASIN MIXER (Lever Handle) BDM-BIS-301SL-XX
Factor:
BAGNODESIGN
Company Name
BAGNODESIGN
Address
UNIT 1 OAKWELL PARK TRADING ESTATE BIRSTALL
Postcode
WF17 9LU

View All Listings by this Company

Print This Approval


#2106058

Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks and dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2106058
Expiry date:
30/06/2026
Size:
½” BSP (F)
Marking:
BAGNODESIGN on faceplate.
Installation Requirements:
R001 R010 R040
Model:
REVOLUTION CONCEALED 3 HOLE BASIN MIXER (Wheel Handle) BDM-REV-309-XX M-LINE CONCEALED 3 HOLE BASIN MIXER (Round Lever Handle) BDM-MLI-309-XX IBIZA CONCEALED 3 HOLE BASIN MIXER (Cross Handle) BDM-IBI-305-XX BRISTOL CONCEALED 3 HOLE BASIN MIXER (Flat Lever Handle) BDM-BIS-309L-XX (Flat Cross Handle) BDM-BIS-309X-XX XX’ denotes finish and is replaced with: Chrome Brushed Nickel Matt Black Anthracite Lacquered Zanzibar Gold PVD Gold Soft Bronze Santiago Oyster Burgundy
Factor:
BAGNODESIGN
Company Name
BAGNODESIGN
Address
UNIT 1 OAKWELL PARK TRADING ESTATE BIRSTALL
Postcode
WF17 9LU

View All Listings by this Company

Print This Approval


#1909439

Revolution range of wall mounted two-hole, single outlet (fixed) combination tap assemblies (brass bodies with various finishes). Incorporating a ceramic cartridge headworks and single lever operating member. The spout outlet incorporates an aerator. Maximum working pressure 5 bar. Maximum operating temperature 60°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
1909439
Expiry date:
30/09/2024
Size:
½” BSP(F)
Marking:
Bagnodesign on spout.
Installation Requirements:
R001 R010 R040
Model:
REVOLUTION CONCEALED 2 HOLE BASIN MIXER BDM-REV-315-XX (add color finishes) BRISTOL CONCEALED 2 HOLE BASIN MIXER BDM-BIS-315L-XX Models added April 2024: M-LINE CONCEALED 2 HOLE BASIN MIXER BDM-MLI-315-A-XX M-LINE CONCEALED 2 HOLE BASIN MIXER R&B DOTS BDM-MLI-315-B-XX XX’ denotes finish and is replaced with: Chrome Brushed Nickel Matt Black Anthracite Lacquered Zanzibar Gold PVD Gold Soft Bronze Santiago Oyster Burgundy
Factor:
BAGNODESIGN
Company Name
BAGNODESIGN
Address
UNIT 1 OAKWELL PARK TRADING ESTATE BIRSTALL
Postcode
WF17 9LU

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.