Wall mounted, two-hole, single outlet, combination tap assembly (chrome plated brass body), incorporating a ceramic cartridge headwork with a single lever operating member. The spout incorporates a self-cancelling diverter to the shower outlet and a plastic aerator at the outlet. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.

WRAS Approval Number:

2304082

Expiry date:

30/04/2028

Size:

¾” BSP (M) x ½” BSP (M) offset union

Marking:

Kludi RAK logo on operating member

Installation Requirements:

R001 R030

Model:

RAK10002

Manufacturer:

KLUDI RAK L.L.C

Company Name

KLUDI RAK L.L.C

Address

Ras Al Khaimak, PO BOX-6679

Phone

+97172447759

View All Listings by this Company

Single hole, metal, single outlet (fixed) combination taps assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Supplied with a lever type pop-up waste. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 80°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2306038

Expiry date:

30/06/2028

Note:

No testing performed on pop up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Kludi Rak on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

RAK10021 Polaris Star

Factor:

KLUDI RAK L.L.C

Company Name

KLUDI RAK L.L.C

Address

Ras Al Khaimak, PO BOX-6679

Phone

+97172447759

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 80°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2306051

Expiry date:

30/06/2028

Size:

Stainless steel braided, PEX lined flexible hose assemblies incorporating 1/2" BSP (F) captive nut end connections`

Marking:

Kludi Rak on operating member

Installation Requirements:

R001 R006 R010 R009

Model:

RAK10050

Manufacturer:

KLUDI RAK L.L.C

Company Name

KLUDI RAK L.L.C

Address

Ras Al Khaimak, PO BOX-6679

Phone

+97172447759

View All Listings by this Company