Range of wafer and lugged butterfly valves with blue epoxy coated ductile iron bodies and stainless steel disc. DN50-DN300 are lever operated and DN350 – DN600 are handwheel operated. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

2307071

Size:

DN50, DN60, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500 & DN600 Flanged

Marking:

Atusa, model and technical info on data plate on body. Size and pressure on body

Installation Requirements:

R001

Expiry date:

31/07/2028

Model:

1716-1310 (Wafer Type) 2716-2310 (Lug Type) Models Added December 2023: 900-901 (Wafer Type) 950-951 (Lug Type)

Approval Holder:

ATUSA GRUPO EMPRESARIAL, S.A.

Company Name

ATUSA GRUPO EMPRESARIAL, S.A.

Address

Pol. Industrial ATUSA-Agurain, S/N 01200 Salvatierra (Álava- España)

Phone

+34 945 18 00 00

General Email

info@atusa.es

View All Listings by this Company

Range of flanged gate valves with blue epoxy coated ductile iron bodies and EPDM O-rings and disc. The valves are operated via a non-rising spindle headwork with a wheel type operating member. Maximum working pressure 16.0 Bar

Non-metallic materials and components comply with BS6920 at 80°C

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

2310139

Size:

DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300

Marking:

ATUSA & Size on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

500 & 509

Approval Holder:

ATUSA GRUPO EMPRESARIAL, S.A.

Company Name

ATUSA GRUPO EMPRESARIAL, S.A.

Address

Pol. Industrial ATUSA-Agurain, S/N 01200 Salvatierra (Álava- España)

Phone

+34 945 18 00 00

General Email

info@atusa.es

View All Listings by this Company

'EP80R-01'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.5mm. For use with water up to 50°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

241055077

Expiry date:

31/10/2029

Approval Holder:

ATUSA GRUPO EMPRESARIAL, S.A.

Company Name

ATUSA GRUPO EMPRESARIAL, S.A.

Address

Pol. Industrial ATUSA-Agurain, S/N 01200 Salvatierra (Álava- España)

Phone

+34 945 18 00 00

General Email

info@atusa.es

View All Listings by this Company

Range of In-line Y patterned strainers with ductle iron bodies (blue epoxy powder coated) and stainless-steel mesh. Maximum working pressure: 16 Bar Maximum operating temperature: 85 °C

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400 and DN500 flanged connections

Marking:

ATUSA, DN, PN and Flow arrow on body

Installation Requirements:

R001 R120

Expiry date:

31/01/2030

Model:

510

Approval Holder:

ATUSA GRUPO EMPRESARIAL, S.A.

Company Name

ATUSA GRUPO EMPRESARIAL, S.A.

Address

Pol. Industrial ATUSA-Agurain, S/N 01200 Salvatierra (Álava- España)

Phone

+34 945 18 00 00

General Email

info@atusa.es

View All Listings by this Company

A range of non-return valve with blue epoxy coated ductile iron bodies, stainless-steel disc and EPDM seats. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C

Section:

2185 Valves

Section Subtitle:

Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. Therefore, not considered suitable for Backflow Protection.

WRAS Approval Number:

250702723

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 – 600 Flanged

Marking:

ATUSA, model, size, PN and max temp on data plate. Size, PN and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

520

Approval Holder:

ATUSA GRUPO EMPRESARIAL, S.A.

Company Name

ATUSA GRUPO EMPRESARIAL, S.A.

Address

Pol. Industrial ATUSA-Agurain, S/N 01200 Salvatierra (Álava- España)

Phone

+34 945 18 00 00

General Email

info@atusa.es

View All Listings by this Company