Three-hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating quarter turn ceramic disc headworks with dome (cube) type operating members. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlets incorporate a plastic aerator. Product is supplied with stainless steel braided, PEX lined connection hoses and pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole, metal, single outlet, fixed.

WRAS Approval Number:

2012305

Expiry date:

31/12/2025

Note:

No testing has been performed on the pop-up waste.

Size:

Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections

Marking:

Keuco on spout.

Installation Requirements:

R001 R006 R009 R010

Model:

59015 xxyy00 Edition 90 – 3 hole basin mixer with pop-up waste. Where ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome 17 - aluminium finish. Where yy denotes: 00 supplied with pop-up waste 01 without pop-up waste

Manufacturer:

KEUCO GmbH & Co. KG

Company Name

KEUCO GmbH & Co. KG

Address

Oesestr. 36, 58675 Hemer

Phone

+49 (0)2372/904-0

View All Listings by this Company

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (brass body - various finishes, see model). Flow is controlled by a solenoid valve activated via an infra-red sensor. The product incorporates a manual temperature control operated by a single lever on the side of the body. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate an approved single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.

WRAS Approval Number:

2111313

Expiry date:

30/11/2026

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

KEUCO on body

Installation Requirements:

R001 R006 R009 R010

Model:

51611xxyyzz - Elegenace Where: xx = finish: 01 - chrome plated. 02 - polished bronze. 03 - brushed bronze. 04 - polished nickel. 05 - brushed nickel. 07 - stainless steel finish. 12 - polished black chrome. 13 - brushed black chrome. 17 - aluminium finish. yy = pop-up waste: 00 - supplied with pop-up waste. 01 - without pop-up waste. zz = power supply: 00 - with battery 6V supply. 01 - with mains supply 230V (230V/6V).

Manufacturer:

KEUCO GmbH & Co. KG

Company Name

KEUCO GmbH & Co. KG

Address

Oesestr. 36, 58675 Hemer

Phone

+49 (0)2372/904-0

View All Listings by this Company

Range of single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a lever type pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2201315

Expiry date:

31/01/2027

Note:

No testing has been performed on the pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections.

Marking:

Keuco on body

Installation Requirements:

R001 R006 R009 R010

Model:

59509 xx1000 59509 xx2000 59509 xx3000 ‘xx’ denotes finish, and is replaced with: 01 - chrome plated 02 - polished bronze 03 - brushed bronze 04 - polished nickel 05 - brushed nickel 07 - stainless steel 12 - polished black chrome 13 - brushed black chrome 17 - aluminium finish 37 - black matt

Manufacturer:

KEUCO GmbH & Co. KG

Company Name

KEUCO GmbH & Co. KG

Address

Oesestr. 36, 58675 Hemer

Phone

+49 (0)2372/904-0

View All Listings by this Company