Range of single hole, single outlet (fixed) combination tap assemblies (variety of finishes) incorporating a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1906010

Expiry date:

30/06/2024

Size:

Stainless steel braided EPDM lined flexible hoses incorporating ½” BSP captive nut end connections.

Marking:

D & Dolphin on side of body or rear of operating member

Installation Requirements:

R001 R006 R010

Model:

DB1600xx Dolphin Blue & DB1650xx Dolphin Blue ‘xx’ denotes surface finish and can be replaced with any number between 00 & 99.

Manufacturer:

Dolphin Solutions Ltd

Company Name

Dolphin Solutions Ltd

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

View All Listings by this Company

Range of wall mounted two hole thermostatic blending valves having brass bodies (various finishes). Incorporating a 2 way ceramic disc diverter (2 on, 1 off) flow control which also diverts the flow from a shower to shower outlet with dome type operating members. The temperature is controlled independently via a thermostatic cartridge and dome type or lever type operating members. Inlets incorporates approved check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

1911347

Expiry date:

30/11/2024

Size:

½” BSP (F)

Marking:

Dolphin logo on body.

Installation Requirements:

R001 R010 R040

Model:

DB3100.x(.xx) DB3101.x(.xx) DB3200.x(.xx) DB3201.x(.xx) Where .x denotes finish and can be replaced by: .1 - .5 to denote the finish: .1 brushed/satin polished, .2 to mirror polished, .3 brushed/satin polished with PVD coating, .4 mirror polished with PVD coating .5 powder coated. .6 - .9 other material and finish options that may be available in the future. So for example DB3100.1 is brushed/satin polished finish. The suffix (.xx),.3 to .5 are used and they will consist of numbers 00-99 to denote the colour of PVD or powder coat. So for example DB3100.3.50 is brushed/satin polished with Gold PVD coating.

Factor:

Dolphin Solutions Ltd

Company Name

Dolphin Solutions Ltd

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

View All Listings by this Company

Ranges of sensor operated flow control devices incorporating solenoid valves with acetal bodies, EPDM rubber diaphragms, stainless steel pins and plungers. The inlet incorporates a stainless-steel strainer. Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

1906138

Expiry date:

30/06/2024

Note:

IRN’s R001, R040 apply when the devices are used to control flow to a tap or shower. IRN’s R001, R075, R120 apply when the devices are used to control flow to a urinal.

Size:

10mm spigot

Marking:

DOLPHIN & DOLPHIN LOGO ON TAP BASE

Installation Requirements:

R001 R008

Model:

Prox sensor Kit for faucet: DB6220/DB6225 Wave On/Off sensor Kit for faucet: DB6240/DB6245 Prox sensor Kit for shower: DB6210/DB6215 Wave On/Off sensor Kit for shower: DB6280/DB6285 Prox sensor Kit for urinal: DB620/DB625 Wave On/Off sensor Kit for urinal: DB6250/DB6255

Factor:

Dolphin Solutions Ltd

Company Name

Dolphin Solutions Ltd

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

View All Listings by this Company

Range of shower heads incorporating stainless steel bodies (various finishes) and silicone rubber nozzles. The inlet incorporates a flow regulator and a swivel connection. Maximum operating temperature 45°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2003342

Expiry date:

31/03/2025

Note:

Open outlet use only.

Size:

½” BSP (F)

Marking:

Dolphin logo on body.

Installation Requirements:

R001 R040

Model:

DB3001.x(.xx) Dolphin Blue Stainless Steel Slimline Shower Head 250x250 Round DB3002.x(.xx) Dolphin Blue Stainless Steel Slimline Shower Head ø250 Square ‘x’ denotes the finish and is replaced with: 1 = brushed/satin polished. 2 = mirror polished. 3 = brushed/satin polished with PVD coating. 4 = mirror polished with PVD coating. 5 = powder coating. 9 – other finishes that may be available in the future. ‘xx’ only applies to products with a PVD coating, denotes the colour of the PVD and is replaced with numbers between 00 and 99.

Factor:

Dolphin Solutions Ltd

Company Name

Dolphin Solutions Ltd

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

View All Listings by this Company

Range of shower heads having stainless steel bodies (various finishes, see model) and silicone rubber nozzles. The inlet incorporates a flow regulator. Maximum operating temperature 65°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2003347

Expiry date:

31/03/2025

Note:

Open outlet use only

Size:

½” BSP (M)

Marking:

Dolphin logo on body.

Installation Requirements:

R001 R040

Model:

DB3000.x(.xx) Where .x denotes finish and can be replaced by: .1 - .5 to denote the finish: .1 to denote brushed/satin polished, .2 to denote mirror polished, .3 to denote brushed/satin polished with PVD coating, .4 to denote mirror polished with PVD coating & .5 to denote powder coated. .6 - .9 to denote other material and finish options that may be available in the future. And .xx denotes finish and can be replaced by: (.xx), in above codes, which when in use appear without the brackets, are only applicable where the previous suffix .3 to .5 is used and they will consist of numbers 00-99 to denote the colour of PVD or powder coat.

Manufacturer:

Dolphin Solutions Ltd

Company Name

Dolphin Solutions Ltd

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

View All Listings by this Company