Pentobox range of water meter manifolds with plastic bodies and an integral spherical valve on the inlet. The models incorporate a non-return valve, (not suitable for backflow protection). Compression models are for use with metric and imperial PE80 pipe (manufactured to BS EN 12201). Maximum working pressure 16.0 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

Size:

Please refer to model.

Marking:

AVK logo and date stamp on cover. Flow arrow on meter box body. Date stamp and size on manifold. (Date stamps = two clocks, one for month, the other for year).

Installation Requirements:

R001 R008

Expiry date:

31/10/2028

Model:

8054125521110301000: 25mm compression. 8054132521110301000: 32mm compression. 8054121521110301000: ½" compression. 8054326521110301000: ¾" BSP (F). 8054125521110331000: 25mm compression. 8054132521110331000: 32mm compression. 8054121521110331000: ½" compression. 8054326521110331000: ¾" BSP (F).

Approval Holder:

AVK UK Ltd.

Company Name

AVK UK Ltd.

Address

8 Rushmills, Northampton

Postcode

NN4 7YB

Phone

01246479100

General Email

chle@avkuk.co.uk

View All Listings by this Company

Fire hydrant (screw down pattern type) with ductile iron body (blue epoxy coated). Maximum working pressure 16.0 bar. For above and below ground, cold-water use.

Section:

2070 Valves

Section Subtitle:

Fire hydrant. Where possible, above ground fire hydrants should be considered. The location of fire hydrants should be site specific and subject to assessment of fluid category risk.

WRAS Approval Number:

240702701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN80

Marking:

AVK on body. AVK and additional info on adhesive label on body.

Installation Requirements:

R001 R120

Expiry date:

31/07/2029

Model:

S29-388 & S29-389

Approval Holder:

AVK UK Ltd.

Company Name

AVK UK Ltd.

Address

8 Rushmills, Northampton

Postcode

NN4 7YB

Phone

01246479100

General Email

chle@avkuk.co.uk

View All Listings by this Company

Manufacturer:

AVK UK Ltd.

Company Name

AVK UK Ltd.

Address

8 Rushmills, Northampton

Postcode

NN4 7YB

Phone

01246479100

General Email

chle@avkuk.co.uk

View All Listings by this Company

Range of gate valves incorporating blue epoxy coated ductile iron bodies. EPDM coated ductile iron wedges and a non-rising spindle headwork. Some models incorporate a bypass. Maximum working pressure 16.0 bar. Maximum operating temperature 45°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

260188006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

AVK, PN and DN on both the body and label on body.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

2105035#140069 2108035#140069 2110035#140069 2115035#140069 2120035#140069 2125035#140069 2130035#140069 2135035#140069 2140035#140069 Where # is: 2 – Clockwise to close, fitted with BS 5163 stemcap (white insert) (All sizes) 3 - Clockwise to open, fitted with BS 5163 stemcap (red insert) (All sizes) G – Clockwise to close, fitted with BS 5163 stemcap (white insert), Bypass fitted (DN350+400 ONLY) H - Clockwise to open, fitted with BS 5163 stemcap (red insert), Bypass fitted (DN350+400 ONLY)

Approval Holder:

AVK UK Ltd.

Company Name

AVK UK Ltd.

Address

8 Rushmills, Northampton

Postcode

NN4 7YB

Phone

01246479100

General Email

chle@avkuk.co.uk

View All Listings by this Company

Manufacturer:

AVK UK Ltd.

Company Name

AVK UK Ltd.

Address

8 Rushmills, Northampton

Postcode

NN4 7YB

Phone

01246479100

General Email

chle@avkuk.co.uk

View All Listings by this Company