Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a dome type operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed.

WRAS Approval Number:

1907370

Expiry date:

31/07/2024

Note:

The 100190229 – N109390074 concealed part is not approved in its own right.

Size:

½” BSP (F)

Marking:

Porcelanosa on spout face plate.

Installation Requirements:

R001 R010 R040

Model:

100190229 – N109390074 concealed part for use with external trim parts: 100184778 – N109390069 (square spout) & 100190226 – N109390072 (round spout).

Factor:

Noken Design S.A.U

Company Name

Noken Design S.A.U

Address

Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (black or chromium plated brass) incorporating a ceramic cartridge headwork with, single lever operating member. The spout outlet incorporates a plastic aerator. The 100208340 & 100208350 models are supplied with a lever type pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1910012

Expiry date:

31/10/2024

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided, PEX lined flexible hose assemblies with ⅜” captive nut end connections and EPDM rubber washers.

Marking:

NK Porcelanosa on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

100208340,100208350,100208352,100208353,100208354, 100208355,100208362 & 100208373.

Factor:

Noken Design S.A.U

Company Name

Noken Design S.A.U

Address

Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Range of single hole single outlet floor mounted bath taps with chromium plated brass bodies incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a combined plastic aerator and plastic flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1910039

Expiry date:

31/10/2024

Size:

12.7mm Spigot.

Marking:

NK Porcelanosa on operating member.

Installation Requirements:

R001 R010 R040

Model:

100208363 (Black) 100208374 (Chrome)

Factor:

Noken Design S.A.U

Company Name

Noken Design S.A.U

Address

Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated or matt black brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0503 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed, self cancelling diverter to shower.

WRAS Approval Number:

2004361

Expiry date:

30/04/2025

Note:

This approval does not include a shower hose and handset.

Size:

¾” BSP (M)

Marking:

WRAS & nk Porcelanosa on body.

Installation Requirements:

R001 R006 R030

Model:

100284623, 100284640, 100259573 & 100284598 COMBINATION TAP ASSEMBLIES

Factor:

Noken Design S.A.U

Company Name

Noken Design S.A.U

Address

Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company