Range of shower outlets with brass bodies (various finishes) and NBR ‘O’-rings. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2301362

Size:

15mm compression

Marking:

Bagnodesign on body

Installation Requirements:

R001 R040

Expiry date:

31/01/2028

Model:

BDD-ION-113030-B-LZ (LACQUERED ZANZIBAR) BDD-ION-113030-A-MB (MATT BLACK) BDD-ION-113030-A-RCP (SANTIAGO) BDD-ION-113030-A-SBZ (SOFT BRONZE) BDD-ION-113030-A-AN (ANTHRACITE) BDD-ION-113030-A-CR (BRUSHED COPPER) “KOY SHOWER HEAD DIA. 300”

Approval Holder:

BagnoDesign

Company Name

BagnoDesign

Address

Unit 1 Oakwell Park Trading Estate Birstall

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating members. The spout outlet incorporates a plastic aerator, and the product is supplied with a permanently open type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2304034

Size:

Stainless steel braided PEX lined flexible hose assemblies with ½” BSP captive nut end connections.

Marking:

Bagnodesign on front of body.

Installation Requirements:

R001 R006 R009 R583

Expiry date:

30/04/2028

Model:

BDM-BLU-301SW-CP

Product Images

Approval Holder:

BagnoDesign

Company Name

BagnoDesign

Address

Unit 1 Oakwell Park Trading Estate Birstall

View All Listings by this Company

Manufacturer:

BagnoDesign

Company Name

BagnoDesign

Address

Unit 1 Oakwell Park Trading Estate Birstall

View All Listings by this Company

Range of single hole, single outlet fixed combination tap assemblies (brass body with various finishes), incorporating a ceramic cartridge headwork with either a single lever or cross top operating member. The spout outlets incorporate a plastic aerator. Products are supplied with PEX inner-lined grey plastic braided inlet hoses. Maximum working pressure 10 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2212370

Size:

½” BSP captive nut.

Marking:

Bagnodesign on tap body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/12/2027

Model:

PROJECT MONO BASIN MIXER WITHOUT WASTE BDM-PRO-111172-A-XX UNIVERSAL SINGLE LEVER SMOOTH BODY BASIN MIXER BDM-UNI-301S-XX XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS) Burgundy (BUR) Black (MB-C)

Approval Holder:

BagnoDesign

Company Name

BagnoDesign

Address

Unit 1 Oakwell Park Trading Estate Birstall

View All Listings by this Company

Series of wall mounted, thermostatic mixer valve with brass bodies, diverter headwork that controls flow between one, two or three outlets (see model) with various type of operating member. The temperature is controlled independently via a thermostatic cartridge operating member with a manual override button. Inlets incorporate a stainless-steel strainer and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 55°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2303395

Size:

¾” BSP(F)

Marking:

Bagnodesign on backplate

Installation Requirements:

R001 R040

Expiry date:

31/03/2028

Model:

BRISTOL THERMOSTATIC SHOWER MIXER 2 OUTLET BDM-BIS-T302VX-A-XX BDM-UNI-T302-CON-B BRISTOL THERMOSTATIC SHOWER MIXER 2 OUTLET BDM-BIS-T303VX-A-XX BDM-UNI-T323-CON-B UNIVERSAL THERMOSTATIC SHOWER MIXER 2 OUTLET BDM-UNI-T302SR-B-XX BDM-UNI-T302-CON-B UNIVERSAL THERMOSTATIC SHOWER MIXER 2 OUTLET BDM-UNI-T302SS-B-XX BDM-UNI-T302-CON-B UNIVERSAL THERMOSTATIC SHOWER MIXER 3 OUTLET BDM-UNI-T303SR-B-XX BDM-UNI-T303-CON-B UNIVERSAL THERMOSTATIC SHOWER MIXER 3 OUTLET BDM-UNI-T303SS-B-XX BDM-UNI-T303-CON-B NARA THERMOSTATIC SHOWER MIXER 3 OUTLET BDM-NAR-CT302-XX BDM-UNI-T302-CON-B XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS) Burgundy (BUR) Black (MB-C)

Approval Holder:

BagnoDesign

Company Name

BagnoDesign

Address

Unit 1 Oakwell Park Trading Estate Birstall

View All Listings by this Company

Range of wall hung concealed WC flushing cisterns with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

240602717

Size:

½” BSP (M)

Marking:

Bagnodesign, WRAS and model name on cover, 6 litre line inside cistern

Installation Requirements:

R001 R280 R556 R581

Expiry date:

30/06/2029

Model:

BAGNODESIGN AQE-B695-D13-ESG1

Approval Holder:

BagnoDesign

Company Name

BagnoDesign

Address

Unit 1 Oakwell Park Trading Estate Birstall

View All Listings by this Company