Range of submersible pumps with stainless steel bodies, impellers and shaft. The XPW range incorporates a strainer cowl on the suction end of the pump. The XPWA range features a stainless head which provides a threaded connection instead of the strainer. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2011326

Size:

XPW: 1¼” BSP (F). XPWA: 1¼” BSP (F) x 1½” BSP (F).

Marking:

Dutypoint, model and other technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2025

Model:

(XPW)(i)(ii)-(iii) and (XPWA)(i)(ii)-(iii) ranges. Where: XPW or XPWA = range name. (i) = Nominal flow in m³/h x 10 (3, 5 or 9). (ii) = Number of stages x 10 (040-100). (iii) = Voltage/motor speed (M = single phase 230V, T = Three phase 400V, T230 = Three phase 230V. All of which can also be prefixed with 6 for 60Hz motor speed. Std. is 50Hz). Example codes: XPW3040-M & XPWA9090-T230.

Product Images

Approval Holder:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Dutypoint ‘VS’ range of cold water supply booster sets, incorporating 2 to 8 pumps with a modular stainless steel manifold system. The booster sets also incorporate spherical valves, non-return valves, pressure switches/sensors and expansion vessels.. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2011357

Size:

DN80 flanged inlet/outlet.

Marking:

Dutypoint logo, model no, serial no, company address and other technical information on control box.

Expiry date:

30/11/2025

Model:

VS(i)-(ii)-(iii)(iv)(v) VS = Product range prefix (i) = Number of pumps: 2, 3, 4, 6 or 8 (6 and 8 pump variants will be 2 x 3 pump units or 2 x 4 pump units coupled together). (ii) = Pump Model (4 digits): 3040, 3060, 3080, 3100, 5040, 5060, 5080, 5100, 9040, 9060, 9070 & 9090. (iii) Motor kW size (multiplied by 10): 005, 007, 011, 015, 022, 030. (iv) Power supply type: M (single phase) or T (three phase). Model code example: VS4-9090-030T.

Product Images

Approval Holder:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Manufacturer:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Range of cold water in tank booster sets incorporating an ‘AG’ air gap, consisting of a GRP water storage cistern incorporating a float operated inlet valve, with a copper float and submersible pump or pumps (depending on model). The products incorporate an externally mounted stainless-steel manifold with servicing valve(s), expansion vessel, pressure gauge and a digital control panel. The pumps are connected to the external components via a discharge assembly of internal pipework including an in-line non-verifiable single check valve assembly (suitable for backflow prevention of Fluid Category 2). Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2111366

Note:

These cisterns are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Section 7, Paragraph 4, of the Water Supply (Water Fittings) Regulations 1999. The products incorporate a Fluid Category 3 air gap arrangement.

Size:

1" BSP (M)

Marking:

Fluid Water, Stuart Turner or Flowtech, address, product ref, capacity, job ref and contact information on adhesive label on tank body. Fluid Water or Stuart Turner, model, year of manufacturer and serial no on control box.

Installation Requirements:

R001 R280 R415

Expiry date:

30/11/2026

Proviso:

If implemented, the overflow and warning pipe discharge to drain must be via a type `AA` `AB` or `AD` airgap in accordance with EN 1717.

Model:

IT-A-V-B-C-D-E-F-G-AG Where: IT = Product range name (In Tank). A = Number of pumps (1,2, or 3 pumps). V = Variable speed. B = Maximum flow (l/min per pump - 80 or 120l/min). C = Maximum head (m per Pump, e.g. 60). D = Controller type (MAB). E = Power input (T = 3 Phase – M = 1Phase). F = Vessel Capacity (8 = 8 litre, 24= 24 litre). G = Tank size (Nominal capacity in litres - 250-3000). AG = ‘AG’ air gap. Example: IT-3V-8060-MAB-M/24-1000-AG In Tank booster set with 3 pumps, variable speed, 80l/min max. flow and 60m max. head, MAB controller, 1 phase, 24 litre expansion vessel, 1000 litre capacity with an AG air gap. Model added October 2025: IN - A - B - C - D - E - F IN = Product range name A = number of pumps (1,2, or 3 pumps) B = Maximum flow (per pump) C = Maximum Head (per pump) D = Tank capacity E = Voltage F = Controller Type Example: IN3-8060-1000-M-MAB • IN = product range • A = 3 pumps • B = 80 l/min max flow • C = 60m max head • D = 1000L nominal capacity • E – 1 phase 230v • F = MAB control panel

Product Images

Approval Holder:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Range of vertical multistage pumps with stainless-steel bodies, stainless-steel impellers, shaft and outer sleeve. Maximum working pressures: T (oval flange): 16.0 bar. V (Victaullic & grooved), C (clamp flanges) & F (round flange) versions: 26.0 bar. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2110123

Size:

TPX1-TPX3 models - F (round flange) versions: DN25. TPX5-TPX20 models - F (round flange) versions: DN32-50. TPX1-TPX20 models - T (oval flange), V (Victaullic - EV; Grooved - VR), C (clamp flanges) & F (round flange) versions: DN32-50.

Marking:

Dutypoint, date of production (DD/MM/YYYY), pressure, temperature and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2026

Model:

TPX1, TPX3, TPX5, TPX10, TPX15 & TPX20 Range of vertical multistage pumps Code example (TPX range): TPX 20 /15 A B C D E F G H J K L M N PMP/A. Where: TPX = Pump model TPX. 20 = Rated flow [m³/h] (varies: 1-20). /15 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round; "T" - oval; "V" - Victaulic; "C" - clamp. C = Materials: "I" - (AISI304/EN1.4301); "N" (AISI316/EN1.4401). D = Motor power (kW x 10). E = Frequency: "5" - 50Hz; "6" - 60Hz. F = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. G = Motor type: "Empty" - without motor, "T" - 3-phase; "M" - 1-phase. H = Mechanical Seal: "Empty" - standard version. J = Type of mechanical Seal: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = "Empty" - standard version, "H" - high pressure. L = "Empty" - standard version, "P" - passivated. M = "Empty" - standard version N = "Empty" - no motor, “IE..” motor efficiency class. PMP/A = cold formed pump casing. Minimum and maximum number of stages (please note the oval flange models have a lower maximum, this is included in brackets as follows [15] to denote 15 stages): TPX1: stage from 2 to 37 [23] (50Hz) and from 2 to 25 [15] (60Hz); TPX3: stage from 2 to 33 [21] (50Hz) and from 2 to 23 [14] (60Hz); TPX5: stage from 2 to 36 [21] (50Hz) and from 2 to 23 [14] (60Hz); TPX10: stage from 2 to 24 [15] (50Hz) and from 2 to 17 [10] (60Hz); TPX15: stage from 1 to 17 [10] (50Hz) and from 1 to 12 [10] (60Hz); TPX20: stage from 1 to 17 [10] (50Hz) and from 1 to 10 [7] (60Hz).

Approval Holder:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Range of cold water supply booster sets, consisting of between 2 & 4 pumps, modular stainless steel manifold system, servicing valve, non-return valve (not suitable for backflow protection) and an expansion vessel. Maximum working pressure 10.0 bar or 16.0 bar (identified on adhesive label on expansion vessel) Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2304317

Size:

DN50 to DN150

Marking:

Dutypoint Ltd. model, serial number and other technical information on adhesive label on base.

Installation Requirements:

R001 R415

Expiry date:

30/04/2028

Model:

VT2-05-xxxx VT2-10-xxxx VT2-15-xxxx VT2-20-xxxx VT3-05-xxxx VT4-05-xxxx VT3-10-xxxx VT3-15-xxxx VT3-20-xxxx VT4-10-xxxx VT4-15-xxxx VT4-20-xxxx Example of model: VT2-05-015T xxxx on end of model codes above denotes all motor size and type. Range: VT. Number of Pumps: 2. Nominal flow rate: (m³/hr) 05. Motor kW: (without decimal)15 (1.5kw). Voltage: (T=400/3/50 M=230/1/50) T

Product Images

Approval Holder:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Manufacturer:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company