Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headwork with single lever operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with a click waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2006323

Expiry date:

30/06/2025

Size:

Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections

Marking:

DTC32A (brand of Methven) on body. DEVA on operating member.

Installation Requirements:

R001 R006 R010

Model:

ADORE113/EK

Factor:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington

Postcode

WA3 3JE

Phone

0800 195 1602

View All Listings by this Company

Range of flexible shower hose assemblies comprising of a multi-layered hose (silver external appearance) with a transparent PVC outer layer aluminium, PVC and polyester yarn middle layers and a black PVC inner liner, brass end connections, EPDM ‘O’-rings and/or washers. Maximum operating temperature 60°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

1911068

Expiry date:

30/11/2024

Note:

Open outlet use only.

Size:

½” BSP (F) conical or captive nut.

Marking:

DTC15, WRAS and date of manufacture (YY) on conical nut.

Installation Requirements:

R001

Model:

HOSE2.0 SHOWER HOSES (DN8.5, DN10.5 & DN10.5-11 BORE)

Factor:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington

Postcode

WA3 3JE

Phone

0800 195 1602

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge with single lever operating members. The spout outlets incorporate a stainless-steel filter. Maximum working pressure 5 bar. Maximum operating temperature 85°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1905404

Expiry date:

31/05/2024

Size:

Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.

Marking:

DEVA & DTC 53 on operating member

Installation Requirements:

R001 R006 R010

Model:

SPA2113/EX COMBINATION TAP ASSEMBLIES

Factor:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington

Postcode

WA3 3JE

Phone

0800 195 1602

View All Listings by this Company