Xiamen Lota International Co., Ltd. Approvals


#240402033

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 Bar. Maximum operating temperature 60.0°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
240402033
Expiry date:
30/04/2029
Size:
Stainless steel braided, PEX lined flexible hose assemblies with 1/2" BSP captive nut end connections.
Marking:
LOTA on body.
Installation Requirements:
R001 R006 R009 R010
Model:
62870-0001 (Chrome), 62870-006801 (Matt Black), 62870-0008 (Stainless Steel).
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#240402043

Range of deck mounted single hole, single outlet (fixed) combination tap assemblies (chromium plated brass bodies), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate plastic aerators, flow straighteners, stainless steel strainers or open outlet type spouts (see models). Some models are supplied with a click type pop-up wastes, that have been verified by test (see models). Maximum working pressure 5.0 Bar. Maximum operating temperature 60.0°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
240402043
Expiry date:
30/04/2029
Size:
Stainless steel braided, PEX lined flexible hose assemblies with 1/2" BSP captive nut end connections.
Marking:
LOTA logo on tap body.
Installation Requirements:
R001 R006 R009 R010
Model:
D6113-5301 (Flow straightener / strainer / Click Waste), 62333-5201 (Open Outlet / Click Waste), 60811-5201 (Flow straightener / strainer / Click Waste), 62314-7001 (Aerator / Click Waste), 62461-7401 (flow straightener / Click Waste), 62635-5201 (Aerator), 62636-5201 (Aerator), 62912-5001 (Open Outlet), 62934-5001 (Open Outlet), 63197-5001 (Aerator), 63068-5001 (Open Outlet).
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#240502018

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
240502018
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Expiry date:
31/05/2029
Size:
¾” BSP (M).
Marking:
LOTA on body.
Installation Requirements:
R001 R005 R010
Model:
60106-5001.
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#240502053

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The products incorporate a pull-out spout with a plastic aerator. Both models incorporate an approved check valve cartridge within the quick connector to the pull-out hose, and the inlet to the pull-out spout of the 63036-01X model incorporates an approved check valve cartridge with a plastic flow regulator, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
240502053
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Expiry date:
31/05/2029
Note:
R007 applies to the connecting hose between the tap body and the pull-out hose.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Lota on front of body
Installation Requirements:
R001 R007 R009 R090
Model:
63036-01X, 63694-00X. Where X denotes the finish and can be replaced by any of the following: 0107 = Chrome, 04 = Brushed Nickel, 4408 = Brushed Brass, 7001 = Matt Black, 4403 = Brushed Brass (Light), 0402 = Brushed Nickel, 5804 = Gun Metal, 0408 = Brushed Stainless Steel.
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#240502054

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model). The 63691-00X and 63693-00X models incorporate a ceramic cartridge headwork with a single lever operating member. The 63692-00X model incorporates ¼ turn ceramic cartridge headworks with single lever operating members. The 63693-00X model incorporates a pull-down spout. All spouts incorporate a plastic aerator. The 63691-00X and 63692-00X models are also supplied with an alternative aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
240502054
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Expiry date:
31/05/2029
Note:
R007 applies to the connecting hose between the tap body and the pull-down hose.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Lota on front of body.
Installation Requirements:
R001
Model:
63691-00X, 63692-00X, 63693-00X. Where X denotes the finish and can be replaced by any of the following: Available on all models: 0107 = Chrome. Available on 63691-00X and 63692-00X models only: 04 = Brushed Nickel, 4408 = Brushed Brass, 7001 = Matt Black, 4403 = Brushed Brass (Light), 0402 = Brushed Nickel, 5804 = Gun Metal, 0408 = Brushed Stainless Steel.
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 11 of 12

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.