'Uponor Aqua Pipe'. White coloured, extruded PE-Xa pipe. For use with water up to 85°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

250655002

Expiry date:

30/06/2030

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Range of clamp fittings incorporating DZR brass bodies. For use with PE 100 RC pipe (manufactured to EN12201) only. Maximum operating pressure: 16 bar. Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250504005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODELS

Marking:

Uponor logo (U), CR, W (wipex code on connections) and size.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

Wipex coupling: 1018328 (size 25x2,3-G1) 1018329 (size 32x2,9-G1) 1018330 (size 40x3,7-G1 ¼) 1018331 (size 50x4,6-G1 ¼) 1018332 (size 63x5,8-G2) 1018333 (size 75x6,8-G2) 1018334 (size 90x8,2G3) 1018335 (size 110x10,0-G3) Wipex tee: 1018345 (size G1-G1-G1) 1018346 (size G1 ¼-G1 ¼-G1 ¼) 1018347 (size G2-G2-G2) 1018348 (size G3-G3-G3) Wipex elbow: 1018350 (size G1-G1) 1018351 (size G1 ¼-G1 ¼) 1018352 (size G2-G2) 1018353 (size G3-G3) Wipex sleeve: 1018355 (size G1-G1) 1018356 (size G1 ¼-G1 ¼) 1018357 (size G2-G2) 1018358 (size G3-G3) Wipex flange: 1018359 (size F25/4-85/G1) 1018360 (size F32/4-100/G1 ¼) 1018362 (size F50/4-125/G2) 1018364 (size F80/8-160/G3) Wipex reducer male x female: 1018368 (size G1 ¼-G1) 1018369 (size G1 ½-G1 ¼) 1018371 (size G2-G1) 1018372 (size G2-G1 ¼) 1018374 (size G3-G1) 1018375 (size G3-G1 ¼) 1018376 (size G3-G2) Wipex jointing equal: 1042972 (size 25x2,3-25x2,3) 1042973 (size 32x2,9-32x2,9) 1042980 (size 40x3,7-40x3,7) 1042984 (size 50x4,6-50x4,6) 1042981 (size 63x5,8-63x5,8) 1042985 (size 75x6,8-75x6,8) 1042986 (size 90x8,2-90x8,2) 1042987 (size 110x10-110x10) Wipex swivel union: 1045455 (size G1) 1045456 (size G1 ¼-G1) 1045457 (size G1 ¼) 1045458 (size G2-G1 ¼) 1045459 (size G2) 1045460 (size G3-G2) 1045461 (size G3)

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

‘Uponor Q&E’ range of brass press-fit fittings for use with PE-Xa-PE-PE ‘Uponor Aqua Pipe AU’ multi-layered pipes. Maximum operating pressure 10 bar. Maximum operating temperature 70°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604025

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

16mm – 25mm, ½” – 1”.

Marking:

Pipe - Uponor, size, PN, temperature, SDR & PE-Xa. Fittings - Uponor logo, size and other technical information.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Uponor Aqua Pipe AU 3-layer pipes: 1126786 - Uponor Aqua Pipe AU 16x2,2 100 mt, 1126787 - Uponor Aqua Pipe AU 20x2,8 100 mt, 1126788 - Uponor Aqua Pipe AU 25x3,5 50mt. Brass fittings: Uponor Q&E Coupling LL: 1126789 - 16x16, 1126790 - 20x20, 1126791 - 25x25. Uponor Q&E Reducer LL: 1126792 - 20x16, 1126793 - 25x16, 1126794 - 25x20. Uponor Q&E Elbow LL: 1126795 - 16x16, 1126796 - 20x20, 1126797 - 25x25. Uponor Q&E Tee LL: 1126798 - 16x16x16, 1126799 - 20x20x20, 1126800 - 25x25x25. Uponor Q&E Tee Reducer LL: 1126801 - 16x20x16, 1126802 - 20x16x16, 1126803 - 20x16x20, 1126804 - 20x20x16, 1126805 - 25x16x25, 1126806 - 25x20x25. Uponor Q&E Plug LL: 1126807 - 16, 1126808 - 20. Uponor Q&E Adapter Female LL: 1126809 - 16-Rp1/2", 1126810 - 20-Rp1/2", 1126811 - 20-Rp3/4", 1126812 - 20-Rp1", 1126813 - 25-Rp1". Uponor Q&E Adapter Male LL: 1126814 - 16-R1/2", 1126815 - 16-R3/4", 1126816 - 20-R1/2", 1126817 - 20-R3/4", 1126818 - 20-R1", 1126819 - 25-R3/4", 1126820 - 25-R1". Uponor Q&E Adapter Swivel Nut: 1126821 - 16-1/2", 1126822 - 20-1/2", 1126823 - 20-3/4", 1126824 - 25-3/4", 1126825 - 25-1". Uponor Q&E Elbow Swivel Nut: 1126826 - 16-1/2", 1126827 - 20-1/2". Uponor Q&E Tap Elbow LL: 1126828 - 16-1/2", 1126829 - 20-1/2", 1126830 - 20-3/4". Uponor Q&E Elbow Adapter Male LL: 1126831 - 16-G1/2", 1126832 - 20-G1/2", 1126833 - 20-R1/2", 1126834 - 20-G3/4", 1126871 - 25-G3/4". Uponor Q&E Elbow Adapter Female LL: 1126835 - 16-1/2", 1126836 - 20-3/4", 1126837 - 25-3/4". Uponor Q&E Tee female LL: 1126838 - 25-1/2"-25, 1126839 - 25-3/4"-25. Uponor Q&E BP-Elbow LL: 1126841 - 16-1/2" MT L = 65 MM, 1126842 - 16-1/2" MT L = 90 MM, 1126843 - 16-1/2" MT L = 175 MM, 1126844 - 16-1/2" MT L = 200 MM, 1126845 - 20-1/2"MT L = 95 MM, 1126846 - 20-1/2"MT L = 200 MM, 1126847 - 20-3/4" MT L = 100 MM. Uponor Q&E Brass Adapter LL: 1126848 - 16-15 CU, 1126849 - 20-15 CU, 1126850 - 20-3/4" CU, 1126851 - 25-1" CU. Uponor Q&E Brass Adapter LL PRESS: 1126852 - 16-1/2" CU, 1126853 - 20-3/4" CU, 1126854 - 25-1" CU. Uponor Q&E adapter male thread PL: 1023003 - 16-R1/2"MT, 1023005 - 20-R1/2"MT, 1023007 - 25-R3/4"MT. Uponor Smart Aqua tap elbow term. box Q&E UP PL: 1047935 - 16-Rp1/2"FT. Uponor Smart Aqua tap elbow term. box Q&E SP PL: 1047932 - 20-Rp1/2"FT, 1047933 - 25-Rp3/4"FT.

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Uponor S-Press press fittings, Uni-X & Uni-C compression fittings for use with Uponor MLC pipe. Maximum working pressure 10.0 bar, maximum operating temperature 70°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251188701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

14mm

Marking:

Manufacturers name or trademark “U” and size on fitting. Uponor and product info on pipe.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

1058085 Uponor Uni-C compression adapter MLC 1013894 UPONOR UNI‐C COUPLING PLATED MLC 1014513 UPONOR S‐PRESS ADAPTER MALE THREAD 1014515 UPONOR S‐PRESS ADAPTER FEMALE THREAD 1014886 UPONOR S‐PRESS TEE 1015154 UPONOR S‐PRESS COUPLING 1015437 Uponor S-Press tap elbow 1133445 Uponor S-Press elbow 1133446 Uponor S-Press tap elbow twin 90deg long 1014654 Uponor SMART AQUA ELBOW ADAPTER S‐PRESS 1014511 UPONOR S‐PRESS ADAPTER 1013366 Uponor Uni Pipe PLUS white 1013577 Uponor Uni Pipe PLUS white insulated 1013678 Uponor Uni Pipe PLUS white in conduit 1160885 Uponor Uni Pipe PLUS white insulated

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Manufacturer:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Range of ‘PPS/GF BFS (black)’ shrink back fittings for use with ‘Uponor Combi pipe’ (PEX/EVOH/PEX). Maximum operating pressures 12 bar & 6 bar, with maximum operating temperatures 20°C & 95°C respectively.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251004016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

U or UPONOR on fittngs. Uponor and product info on pipe.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

1144509 ELBOW PPS 16-16 ELBOW, 1144510 ELBOW PPS 20-20 ELBOW, 1144511 ELBOW PPS 25-25 ELBOW, 1144512 TEE PPS 16-16-16 TEE, 1144513 TEE PPS 20-20-20 TEE, 1144523 TEE PPS 25-25-25 TEE, 1144515 TEE REDUCER PPS 20-16-20, 1144517 TEE REDUCER PPS 20-16-16, 1144516 COUPLING PPS 16-16, 1144518 COUPLING PPS 20-20, 1144519 COUPLING PPS 25-25, 1144522 REDUCER PPS 20-16, 1162269 AQUA PLUS MANIFOLD Q&E PPM PPS 1” 2X16 C/C 50MM, 1162270 AQUA PLUS MANIFOLD Q&E PPM PPS 1” 3X16 C/C 50MM, 1162271 AQUA PLUS MANIFOLD Q&E PPM PPS 1” 4X16 C/C 50MM, 1162272 AQUA PLUS MANIFOLD Q&E PPM PPS 1” 1XG1/2” MT C/C 50MM, 1162273 AQUA PLUS MANIFOLD Q&E PPM PPS 1” 1XG3/4” MT C/C 50MM, 1162276 AQUA PLUS MANIFOLD PPM 1X C/C50MM, 1162275 AQUA PLUS MANIFOLD PPM 2X C/C50MM, 1162274 AQUA PLUS MANIFOLD PPM 3X C/C50MM, 1162277 AQUA PLUS MANIFOLD PPM 1+1X C/C50MM, 1162282 AQUA PLUS Q&E ADAPTER PPS PPM 16, 1162283 AQUA PLUS Q&E ADAPTER PPM 18, 1162284 AQUA PLUS Q&E ADAPTER PPM 20, 1162290 AQUA PLUS ADAPTER MALE THREAD PPM 1" G3/4"MT, 1162294 AQUA PLUS ELBOW MALE FEMALE PPM 1"MT-1"FT, 1162293 AQUA PLUS ELBOW ADAPTER MALE PPM 1" G3/4"MT, 1162291 AQUA PLUS ADAPTER BRASS NUT PPM 1"MT-G3/4"SN, 1162292 AQUA PLUS ADAPTER BRASS NUT PPM 1"FT-3/4"SN, 1162288 AQUA PLUS OUTLET PLUG PPS PPM, 1162297 AQUA PLUS MANIFOLD PLUG PPM MT, 1162286 AQUA PLUS PPM OUTLET NUT, 1162295 AQUA PLUS NIFOLD END CAP PPM 1"FT END CAP.

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Uponor S-Press composite fittings, Uponor S-Press composite PPSU reducers with S-Press PLUS composite PPSU nipples, Uponor RS fittings & Uponor S Press Metal Press fittings for use with for use with Uponor MLC pipe. Maximum working pressure and operating temperature: 10.0 bar@70°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

260188007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Uponor MLC Pipe (40 – 110mm) Uponor S-Press composite PPSU fittings (40 – 75mm) Uponor S-Press composite PPSU reducers with S-Press PLUS composite PPSU nipples 20, 25, 32mm Uponor RS Fittings (63 – 110mm) Uponor S-Press Metal Press fittings (40 -75mm)

Marking:

Uponor or U on fitting. Uponor MLCP and product info on pipe

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

1013446 pipe Uponor MLC white S 40x4,0 5m 1013449 pipe Uponor MLC white S 50x4,5 5m 1013451 pipe Uponor MLC white S 63x6,0 5m 1013453 pipe Uponor MLC white S 75x7,5 5m 1013455 pipe Uponor MLC white S 90x8,5 5m 1013457 pipe Uponor MLC white S 110x10,0 5m 1029125 RS Metall Uponor RS adapter S-Press 63-RS2 1029126 RS Metall Uponor RS adapter S-Press 75-RS2 1029127 RS Metall Uponor RS adapter S-Press 90-RS3 1029128 RS Metall Uponor RS adapter S-Press 110-RS3 1029129 RS Metall Uponor RS flange adapter RS3-DN80 (PN16) 1029130 RS Metall Uponor RS flange adapter RS3-DN100 (PN16) 1029131 RS Metall Uponor RS adapter male thread R2"MT-RS2 1029132 RS Metall Uponor RS adapter male thread R2 1/2"MT-RS2 1029133 RS Metall Uponor RS adapter male thread R3"MT-RS3 1029134 RS Metall Uponor RS adapter female thread Rp1"FT-RS2 1029135 RS Metall Uponor RS adapter female thread Rp2"FT-RS2 1029136 RS Metall Uponor RS adapter female thread Rp2 1/2"FT-RS2 1029137 RS Metall Uponor RS adapter female thread Rp3"FT-RS3 1029138 RS Metall Uponor RS elbow RS2-RS2 1029139 RS Metall Uponor RS elbow RS3-RS3 1029140 RS Metall Uponor RS elbow 45deg RS2-RS2 1029141 RS Metall Uponor RS elbow 45deg RS3-RS3 1029142 RS Metall Uponor RS tee RS2-RS2-RS2 1029143 RS Metall Uponor RS tee RS3-RS3-RS3 1029144 RS Metall Uponor RS coupling RS2-RS2 1029145 RS Metall Uponor RS coupling RS3-RS3 1029146 RS Metall Uponor RS reducer RS3-RS2 1032895 S-Press Metall Uponor S-Press adapter male thread 63-R2"MT 1032896 S-Press Metall Uponor S-Press adapter male thread 75-R2 1/2"MT 1046477 RS Metall Uponor RS spacer RS2-RS2 l=130mm 1046478 RS Metall Uponor RS spacer RS3-RS3 l=210mm 1046750 RS Metall Uponor RS spacer RS2-RS2 l=5mm 1046751 RS Metall Uponor RS spacer RS3-RS3 l=5mm 1046901 S-Press Metall Uponor S-Press adapter male thread 40-R1 1/4"MT 1046902 S-Press Metall Uponor S-Press adapter male thread 40-R1 1/2"MT 1046903 S-Press Metall Uponor S-Press adapter female thread 40-Rp1 1/4"FT 1046904 S-Press Metall Uponor S-Press adapter female thread 40-Rp1 1/2"FT 1046905 S-Press Metall Uponor S-Press adapter male thread 50-R1 1/2"MT 1046906 S-Press Metall Uponor S-Press adapter male thread 50-R2"MT 1046907 S-Press Metall Uponor S-Press adapter female thread 50-Rp1 1/2"FT 1046908 S-Press Metall Uponor S-Press elbow 40-40 1046909 S-Press Metall Uponor S-Press elbow male thread 40-R1 1/4"MT 1046910 S-Press Metall Uponor S-Press elbow female thread 40-Rp1 1/2"FT 1046911 S-Press Metall Uponor S-Press elbow 50-50 1046912 S-Press Metall Uponor S-Press elbow female thread 50-Rp1 1/2"FT 1046913 S-Press Metall Uponor S-Press elbow 45deg 40-40 1046914 S-Press Metall Uponor S-Press elbow 45deg 50-50 1046921 S-Press Metall Uponor S-Press tee 40-40-40 1046922 S-Press Metall Uponor S-Press tee female thread 40-Rp1/2"FT-40 1046923 S-Press Metall Uponor S-Press tee female thread 40-Rp3/4"FT-40 1046928 S-Press Metall Uponor S-Press tee 50-50-50 1046929 S-Press Metall Uponor S-Press tee female thread 50-Rp1"FT-50 1046932 S-Press Metall Uponor S-Press coupling 40-40 1046934 S-Press Metall Uponor S-Press reducer 50-40 1046935 S-Press Metall Uponor S-Press coupling 50-50 1046937 S-Press Metall Uponor S-Press adapter swivel nut 40-G1 1/2"SN 1046939 S-Press Metall Uponor S-Press adapter swivel nut 50-G2"SN 1046940 RS Metall Uponor RS adapter S-Press 40-RS2 1046941 RS Metall Uponor RS adapter S-Press 50-RS2 1059397 RS Metall Uponor RS adapter S-Press 16-RS2 1059399 RS Metall Uponor RS flange adapter RS2-DN65 (PN16) 1059403 RS Metall Uponor RS adapter female thread Rp1/2"FT-RS2 1059404 RS Metall Uponor RS adapter female thread Rp1/2"FT-RS3 1060094 S-Press Metall Uponor S-Press adapter swivel nut 40-G1 1/4"SN 1060095 S-Press Metall Uponor S-Press adapter swivel nut 50-G1 1/2"SN 1095818 RS Metall Uponor RS adapter S-Press PLUS 20-RS2 1095819 RS Metall Uponor RS adapter S-Press PLUS 25-RS2 1095820 RS Metall Uponor RS adapter S-Press PLUS 32-RS2 1032877 S-Press PPSU Uponor S-Press elbow PPSU 63-63 1032878 S-Press PPSU Uponor S-Press elbow PPSU 75-75 1032879 S-Press PPSU Uponor S-Press elbow 45deg PPSU 63-63 1032880 S-Press PPSU Uponor S-Press elbow 45deg PPSU 75-75 1032881 S-Press PPSU Uponor S-Press coupling PPSU 63-63 1032882 S-Press PPSU Uponor S-Press coupling PPSU 75-75 1032883 S-Press PPSU Uponor S-Press reducer PPSU 63-40 1032884 S-Press PPSU Uponor S-Press reducer PPSU 63-50 1032885 S-Press PPSU Uponor S-Press reducer PPSU 75-50 1032886 S-Press PPSU Uponor S-Press reducer PPSU 75-63 1032887 S-Press PPSU Uponor S-Press tee PPSU 63-63-63 1032888 S-Press PPSU Uponor S-Press tee PPSU 75-75-75 1032889 S-Press PPSU Uponor S-Press tee reducer PPSU 63-25-63 1032890 S-Press PPSU Uponor S-Press tee reducer PPSU 63-32-63 1032891 S-Press PPSU Uponor S-Press tee reducer PPSU 63-40-63 1032892 S-Press PPSU Uponor S-Press tee reducer PPSU 75-32-75 1032893 S-Press PPSU Uponor S-Press tee reducer PPSU 75-40-75 1032894 S-Press PPSU Uponor S-Press tee reducer PPSU 75-50-75 1039941 S-Press PPSU Uponor S-Press reducer PPSU 40-25 1039942 S-Press PPSU Uponor S-Press reducer PPSU 40-32 1039943 S-Press PPSU Uponor S-Press reducer PPSU 50-32 1039962 S-Press PPSU Uponor S-Press tee reducer PPSU 40-20-40 1039963 S-Press PPSU Uponor S-Press tee reducer PPSU 40-25-32 1039964 S-Press PPSU Uponor S-Press tee reducer PPSU 40-25-40 1039965 S-Press PPSU Uponor S-Press tee reducer PPSU 40-32-32 1039966 S-Press PPSU Uponor S-Press tee reducer PPSU 40-32-40 1039967 S-Press PPSU Uponor S-Press tee reducer PPSU 50-25-40 1039968 S-Press PPSU Uponor S-Press tee reducer PPSU 50-25-50 1039969 S-Press PPSU Uponor S-Press tee reducer PPSU 50-32-50 1046386 S-Press PPSU Uponor S-Press elbow PPSU 40-40 1046387 S-Press PPSU Uponor S-Press elbow PPSU 50-50 1046388 S-Press PPSU Uponor S-Press elbow 45deg PPSU 40-40 1046389 S-Press PPSU Uponor S-Press elbow 45deg PPSU 50-50 1046390 S-Press PPSU Uponor S-Press tee PPSU 40-40-40 1046391 S-Press PPSU Uponor S-Press tee PPSU 50-50-50 1046400 S-Press PPSU Uponor S-Press tee reducer PPSU 50-40-50 1046401 S-Press PPSU Uponor S-Press coupling PPSU 40-40 1046402 S-Press PPSU Uponor S-Press coupling PPSU 50-50 1046406 S-Press PPSU Uponor S-Press reducer PPSU 50-40

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Manufacturer:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company