Zhejiang Carlota Sanitary Ware Manufactory Co Ltd Approvals


#2004320

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener . Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004320
Expiry date:
30/04/2025
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections
Marking:
Carlota logo on body
Installation Requirements:
R001 R006 R010
Model:
5002-CR
Approval Holder:
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Company Name
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Address
No. 10 JINBO ROAD, BINGGANG INDUSTRIAL AREA SHAMEN TOWN, YUHUAN, ZHEJIANG

View All Listings by this Company
Manufacturer:
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Company Name
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Address
No. 10 JINBO ROAD, BINGGANG INDUSTRIAL AREA SHAMEN TOWN, YUHUAN, ZHEJIANG

View All Listings by this Company

Print This Approval


#2007317

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007317
Expiry date:
31/07/2025
Size:
15mm Compression.
Marking:
CAL logo on rear of operating member
Installation Requirements:
R001 R006 R010
Model:
Bolensa Mixertap: ACT2080 TAF35
Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Phone
01226 283434
General Email
mstaweczny@abodedesigns.co.uk

View All Listings by this Company
Manufacturer:
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Company Name
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Address
No. 10 JINBO ROAD, BINGGANG INDUSTRIAL AREA SHAMEN TOWN, YUHUAN, ZHEJIANG
General Email

View All Listings by this Company

Print This Approval


#2009322

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2009322
Expiry date:
30/09/2025
Size:
Stainless steel braided EPDM lined hose assemblies with 15mm Compression end connections.
Marking:
“CAL” on rear of handle.
Installation Requirements:
R001 R006 R010
Model:
ARNO MIXERTAP, ACT2092 & TAF3
Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Phone
01226 283434
General Email
mstaweczny@abodedesigns.co.uk

View All Listings by this Company
Manufacturer:
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Company Name
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Address
No. 10 JINBO ROAD, BINGGANG INDUSTRIAL AREA SHAMEN TOWN, YUHUAN, ZHEJIANG
General Email

View All Listings by this Company

Print This Approval


#2103308

Range of single hole single outlet (swivel) combination tap assmeblies with quarter turn ceramic disc headworks and single lever operating members. The outlet incorporates a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2103308
Expiry date:
31/03/2026
Size:
Stainless steel braided EPDM lined hose assemblies incorporating ½” captive nut end connections.
Marking:
CAL on body.
Installation Requirements:
R001 R006 R010
Model:
Velino Swan neck Monobloc Volo Act3011
Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Phone
01226 283434
General Email
mstaweczny@abodedesigns.co.uk

View All Listings by this Company
Manufacturer:
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Company Name
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Address
No. 10 JINBO ROAD, BINGGANG INDUSTRIAL AREA SHAMEN TOWN, YUHUAN, ZHEJIANG
General Email

View All Listings by this Company

Print This Approval


#2106307

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes). Incorporating ceramic cartridge headworks and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2106307
Expiry date:
30/06/2026
Size:
Stainless steel braided EPDM lined hose assemblies incorporating ½” captive nut end connections.
Marking:
CAL on body
Installation Requirements:
R001 R006 R010
Model:
NICO range: ACT3034 (Chrome) ACT3035 (Brushed nickel)
Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Phone
01226 283434
General Email
mstaweczny@abodedesigns.co.uk

View All Listings by this Company
Manufacturer:
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Company Name
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Address
No. 10 JINBO ROAD, BINGGANG INDUSTRIAL AREA SHAMEN TOWN, YUHUAN, ZHEJIANG
General Email

View All Listings by this Company

Print This Approval


#2106302

Single hole, single outlet (swivel) combination tap assembly with brass body (chrom plated). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2106302
Expiry date:
30/06/2026
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
CAL on rear of body.
Installation Requirements:
R001 R006 R010
Model:
Turina Act3023
Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Phone
01226 283434
General Email
mstaweczny@abodedesigns.co.uk

View All Listings by this Company
Manufacturer:
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Company Name
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Address
No. 10 JINBO ROAD, BINGGANG INDUSTRIAL AREA SHAMEN TOWN, YUHUAN, ZHEJIANG
General Email

View All Listings by this Company

Print This Approval


#2203312

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating a quarter turn ceramic disc headworks with single leaver operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2203312
Expiry date:
31/03/2027
Size:
Stainless-steel braided, EPDM lined flexible hose assemblies incorporating ½ captive nut end connection.
Marking:
CAL (brand of manufacturer) on body
Installation Requirements:
R001 R006 R010
Model:
MARIDO ACT3031(Chrome plated) ACT3032 (Brushed Nickel)
Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Phone
01226 283434
General Email
mstaweczny@abodedesigns.co.uk

View All Listings by this Company
Manufacturer:
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Company Name
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Address
No. 10 JINBO ROAD, BINGGANG INDUSTRIAL AREA SHAMEN TOWN, YUHUAN, ZHEJIANG
General Email

View All Listings by this Company

Print This Approval


#2204030

Range of single hole, single outlet fixed combination tap assemblies, incorporating brass bodies (various finishes). Model 3034-CR has a non-rising spindle headwork with cross top operating members. All other models have a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2204030
Expiry date:
30/04/2027
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connection.
Marking:
Carlota on body.
Installation Requirements:
R001 R006 R010
Model:
3259-CR, 3259-BLK & 3259-BB. 3112-CR. 3112M-CR. 3096-CR, 3096-BLK & 3096-BB. 3096M-CR, 3096M-BLK & 3096M-BB. 3118-CR. 3004-CR. 3034-CR. 3271-CR, 3271-BLK & 3271-BB
Approval Holder:
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Company Name
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Address
No. 10 JINBO ROAD, BINGGANG INDUSTRIAL AREA SHAMEN TOWN, YUHUAN, ZHEJIANG

View All Listings by this Company
Manufacturer:
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Company Name
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Address
No. 10 JINBO ROAD, BINGGANG INDUSTRIAL AREA SHAMEN TOWN, YUHUAN, ZHEJIANG

View All Listings by this Company

Print This Approval


#2204031

Range of single hole, single outlet fixed combination tap assemblies, incorporating brass bodies (various finishes), ceramic cartridge headwork with a single lever operating member and waterfall spout outlet. The waterfall spout outlets of models 3110-CR, 3110M-CR & 3260-CR incorporate a stainless-steel mesh. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2204031
Expiry date:
30/04/2027
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connection.
Marking:
Carlota on body.
Installation Requirements:
R001 R006 R160
Model:
3259M-CR, 3259M-BLK & 3259M-BB. 3110-CR. 3110M-CR. 3260-CR.
Approval Holder:
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Company Name
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Address
No. 10 JINBO ROAD, BINGGANG INDUSTRIAL AREA SHAMEN TOWN, YUHUAN, ZHEJIANG

View All Listings by this Company
Manufacturer:
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Company Name
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Address
No. 10 JINBO ROAD, BINGGANG INDUSTRIAL AREA SHAMEN TOWN, YUHUAN, ZHEJIANG

View All Listings by this Company

Print This Approval


#2205001

Range of pillar taps (brass bodies, various finishes - see model), incorporating quarter turn ceramic disc headworks with either cross top (D999M model only) or single lever operating members. The spout outlets incorporate a plastic flow straightener (D91 model only) or a plastic aerator. The products are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar.
WRAS Approval Number:
2205001
Expiry date:
31/05/2027
Size:
D139, D139-BLK, D139-BB: ¾” BSP (M) D91 & D999M: ½” BSP (M).
Marking:
Carlota on tap body.
Installation Requirements:
R001 R005
Model:
D91 (Chrome plated), D139 (Chrome plated), D139-BLK (Matt black), D139-BB (Brushed brass) & D999M (Chrome plated).
Approval Holder:
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Company Name
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Address
No. 10 JINBO ROAD, BINGGANG INDUSTRIAL AREA SHAMEN TOWN, YUHUAN, ZHEJIANG

View All Listings by this Company
Manufacturer:
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Company Name
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Address
No. 10 JINBO ROAD, BINGGANG INDUSTRIAL AREA SHAMEN TOWN, YUHUAN, ZHEJIANG

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.