Waterfit Ltd Approvals


#2310108

Range of (below ground) water meter manifolds (gunmetal bodies), meter carriers (DZR brass bodies) and stopcock carriers (gunmetal bodies). All meter carriers incorporate a non-return valve. All manifold ports and the stopcock carriers incorporate a non-rising spindle stopcock with a T shaped operating member. Maximum working pressure: 16.0°C Cold water use only.

Section:
1510 Water Meter Manifolds
Size:
1/2" BSP (M) x 1.1/2" BSP (M) union adaptor, 1.1/2" BSP (F) manifold & ¾” BSP (F) carriers.
Marking:
Waterfit, WF logo & size on union nut. WF and flow arrow on meter carrier and stopcock carrier. CR Mark on DZR caps.
Installation Requirements:
R001 R008
Expiry date:
31/10/2028
Model:
MAI275002587 (2 Port Manifold) MAl375002588 (3 Port Manifold) MAl475000380 (4 Port Manifold) MAl575000381 (5 Port Manifold) MAI675000382 (6 Port Manifold) MAl775000383 (7 Port Manifold) MAl875000384 (8 Port Manifold) MAl975000959 (9 Port Manifold) MAI075002185 (10 Port Manifold) MAI175002186 (11 Port Manifold) MAI275002542 (12 Port Manifold) MAI375002543 (13 Port Manifold) MAl475002510 (14 Port Manifold) MAI375004576 (12+1 Port Manifold) MAl475004577 (12+2 Port Manifold) MAI775004574 (6+1 Port Manifold) MAl875004575 (6+2 Port Manifold) MAl475004585 (13+1 Port Manifold) CAI075000031 (Meter carrier) CAI075000040 (Stopcock carrier)

Approval Holder:
Waterfit Ltd
Company Name
Waterfit Ltd
Address
PO Box 28 293 Birmingham New Road Dudley
Postcode
DY1 4SJ
Phone
0121 5207987
General Email
enquiries@waterfit.co.uk

View All Listings by this Company

Print This Approval


#240204010

Water meter manifold assembly with gunmetal body, incorporating a servicing valve and a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Max operating pressure 16 bar Maximum operating temperature Cold water only

Section:
1510 Water Meter Manifolds
Size:
¾ BSP (F)
Marking:
Flow arrow inlet and outlet sizes and Company logo (e.g Waterfit, WF)
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
MK8000003184

Approval Holder:
Waterfit Ltd
Company Name
Waterfit Ltd
Address
PO Box 28 293 Birmingham New Road Dudley
Postcode
DY1 4SJ
Phone
0121 5207987
General Email
enquiries@waterfit.co.uk

View All Listings by this Company

Print This Approval


#241202714

Range of plastic water meter manifold adaptors incorporating plastic flow regulators and sampling adapter. Above ground use only. Maximum working pressure: 12.5 Bar. Maximum working temperature: 23°C.

Section:
4001 Components and accessories
Section Subtitle:
Water meters.
WRAS Approval Number:
241202714
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1 1/2" BSP (F) x 1 1/2" BSP (M).
Marking:
Waterfit log on body.
Installation Requirements:
R001 R008 R110
Expiry date:
31/12/2029
Model:
FRA##***XXXX. Number Format – FRA##***XXXX • *** refers to the LPM of the fitted flow regulator (Range: 10LPM – 26.5LPM) • ## refers to unique Badging combination (WF/WF or WF/ST) • XXXX refers to unique ERP number allocation.
Product Images

Manufacturer:
Waterfit Ltd
Company Name
Waterfit Ltd
Address
PO Box 28 293 Birmingham New Road Dudley
Postcode
DY1 4SJ
Phone
0121 5207987

View All Listings by this Company

Print This Approval


#241102058

Range of water meter manifolds incorporated into a meter chamber. The inlet of all models incorporates an isolation valve and an approved check valve however, the complete product has not been fully tested to demonstrate it provides backflow protection. MK7000003003 is for use with MDPE plastic pipe (manufactured to BS EN 12202-1:2011). Maximum working pressure 12.5 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Please refer to model.
Marking:
Waterfit logo on inside of meter casing. Flow arrow on body.
Installation Requirements:
R001 R008
Expiry date:
30/11/2029
Model:
MK7000003054 Meterfit Carrier: 25mm MDPE Tails. MK7000003003 Meterfit Carrier: 25mm compression. MK7000003244 Meterfit Carrier: ¾” BSP (F).
Product Images

Approval Holder:
Waterfit Ltd
Company Name
Waterfit Ltd
Address
PO Box 28 293 Birmingham New Road Dudley
Postcode
DY1 4SJ
Phone
0121 5207987
General Email
enquiries@waterfit.co.uk

View All Listings by this Company

Print This Approval


#250202006

Water meter manifold with a gunmetal body. The product incorporates a non-return valve (not suitable for backflow protection) and a spherical valve on the inlet. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1" BSP (F) x 1” BSP (F).
Marking:
WATERFIT, Waterfit logo, flow arrow and size on body. CR on crutch head and cap.
Installation Requirements:
R001
Expiry date:
28/02/2030
Model:
SACAXX004038

Manufacturer:
Waterfit Ltd
Company Name
Waterfit Ltd
Address
PO Box 28 293 Birmingham New Road Dudley
Postcode
DY1 4SJ
Phone
0121 5207987

View All Listings by this Company

Print This Approval


#250102046

Range rising spindle screw down stop valves with gunmetal bodies and T-type operating members. Models SCM020000535, SCM025000536, SCI100000533, SCM025002164 & SCM032002165 models are to be used with PE80 pipe manufactured to EN 12201. Maximum working pressure: 12.5 Bar. Maximum operating temperature: 23°C.

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
250102046
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See Models below.
Marking:
Waterfit logo (WF), size and flow arrow on body
Installation Requirements:
R001
Expiry date:
31/01/2030
Model:
SCI050000474 – 1/2" BSP (F), SCI075000489 – 3/4" BSP (F), SCI100000458 - 1" BSP (F), SCI150000464 – 11/2" BSP (F), SCI200000482 – 2" BSP (F), SCM020000535 / 41020 – 20mm Compression, SCM025000536 / 41025 - 25mm Compression, SCI100000533 / 41032 - 32mm Compression, SCM025002164 - 25mm pushfit, SCM032002165 - 32mm pushfit.
Product Images

Manufacturer:
Waterfit Ltd
Company Name
Waterfit Ltd
Address
PO Box 28 293 Birmingham New Road Dudley
Postcode
DY1 4SJ
Phone
0121 5207987

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.