Range of deck mounted, three-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating quarter turn ceramic disc headworks with various operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole, single outlet, fixed.

WRAS Approval Number:

2402703

Expiry date:

28/02/2029

Size:

¾” BSP (M)

Marking:

Samuel Heath on base of spout

Installation Requirements:

R001 R006 R010

Model:

V7K44-1YY-XX V7K44-2YY-XX Where the product code suffix ‘YY’ denotes the lever options. It will always be 1,2 or 3 digits, which can be any combination of letters. As examples: LL = Lathe Lever, LW = Lathe Wheel. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Range of bidet handsets (brass bodies, various finishes) with self-closing trigger mechanisms. Inlets incorporate flow limiters and stainless-steel filters in the head of the handsets. Inlet hoses are not supplied with products. Maximum working pressure: 5 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2312061

Expiry date:

31/12/2028

Size:

½” BSP (M).

Marking:

SHS on body.

Installation Requirements:

R001 R070 R415

Model:

V766F-SPRHO-XX, V766K-SPRHO-XX. Where XX denotes the surface finish, and it will always be either 2 or 3 digits which can be any combination of numbers and/or letters, as examples: CP = Chrome, URM = Urban brass matt lacquered.

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Bidet handset (brass body, various finishes) with self-closing trigger mechanism and shower hose assembly. Inlets incorporate flow limiters and stainless-steel filters in the head of the handsets. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2312062

Expiry date:

31/12/2028

Size:

½” BSP (M)

Marking:

SHS on handset .SHS, WRAS & Year of Manufacture (YYYY) on conical nut

Installation Requirements:

R001 R070 R415

Model:

T2066W-SPR-XX. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Floor mounted, spout outlet, (brass body- various finishes) incorporating a plastic flow straightener. Maximum working pressure 65.0 Bar

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlets.

WRAS Approval Number:

240102035

Expiry date:

31/01/2029

Note:

Open outlet use only

Size:

1/2" BSP (F) inlets on installation kit

Marking:

Samuel Heath logo, flow rate and ASME A112.18.1/CSA standard on faceplate. Samuel Heath logo on body of rough kit.

Installation Requirements:

R001 R010 R040

Model:

V141-SP-XX For_me Freestanding Bath Spout V141-IS-XX For_me Installation Kit V141-SP-XX:- Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, or URM = Urban Brass Matt Lacquered. V141-IS-XX:- Where the product code suffix ‘xx’ denotes the product is unfinished.

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes), incorporating a ceramic cartridge headwork with and a dome type operating member. The spout outlets incorporate plastic aerators. Model V208 is supplied with a lever operated pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

240102036

Expiry date:

31/01/2029

Note:

No testing performed on pop up waste.

Size:

Stainless steel braided, PE-X lined flexible hose assemblies with 1/2" BSP (F) captive nut end connectors.

Marking:

Samuel Heath on body.

Installation Requirements:

R010 R006 R009 R010

Model:

V208-XX (with Pop Up Waste) V210-XX (without Pop Up Waste) Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and /or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Range of floor mounted (fixed) combination tap assemblies, (brass bodies – various finishes) incorporating ceramic cartridge headworks (various operating members – see models) and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Maximum working pressure; 5 Bar Maximum operating temperature 85°C

Section:

0465 Combination Tap Assemblies

Section Subtitle:

Single hole, single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

240602002

Expiry date:

28/02/2029

Note:

Product to be used with V736-IS-XX installation kit, however, it is not approved in its own right. The products are not supplied with a shower hose or handset.

Size:

½” BSP (F)

Marking:

Samuel Heath on front of body

Installation Requirements:

R001 R030

Model:

V7K36-YY-XX Where the product code suffix YY denotes the controller options. It will always be 1,2 or 3 digits, which can be any combination of letters. As examples: LL = Ceramic Levers, or LK = Industrial Levers. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (brass body - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a ‘lever type’ pop-up waste (not verified by test). Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

240402047

Expiry date:

30/04/2029

Size:

Stainless steel PEX lined flexible hose assemblies with ½” captive nut end connections.

Marking:

SHS on underside of operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

V6K09YY-XX Where the product code suffix ‘YY’ denotes the lever options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: M = Metal Levers, MB = Metal Levers Black. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters.

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Single hole, single outlet (fixed) over the rim swivel nozzle bidet combination tap assembly (brass body - various finishes) with a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a lever operated pop-up waste (not verified by test). Maximum working pressure 5.0 Bar. Maximum operating temperature 60.0°C.

Section:

0400 Combination Tap Assemblies - Bidet

Section Subtitle:

Single hole.

WRAS Approval Number:

240402052

Expiry date:

30/04/2029

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP Captive nut end connections.

Marking:

SHS logo on underside of operating member

Installation Requirements:

R001 R006 R009 R010

Model:

V6K19-YY-XX Where the product code suffix ‘YY’ denotes the lever options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: M = Metal Levers, MB = Metal Levers Black. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, CTB = City Bronze.

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Range of single-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes) incorporating ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener. Model (V108-XX) is supplied with a lever operated pop-up waste. Maximum working pressure: 5.0 Bar. Maximum operating temperature 85°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

240502024

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Expiry date:

31/05/2029

Note:

No testing performed on pop up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies, with ½” captive nut end connections.

Marking:

Samuel Heath on body.

Installation Requirements:

R001 R006 R009 R010

Model:

V108-XX V128-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Range of stainless steel or brass double interlocking, TPS lined flexible hose assemblies (various finishes) incorporating EPDM gaskets. Maximum operating temperature 60°C. Open Outlet Use Only

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240602069

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Expiry date:

30/06/2029

Size:

See model

Marking:

SHS on end connections.

Installation Requirements:

R001

Model:

V165W-XX 1/2" Female Connection D17, V940W-XX 1/2" Female Connection D17, V941W-XX 1/2" Female Connection D17, V942W-XX 1/2" Female Connection D17. FXF2CX Trade Name Explanation: FX = Double interlock hose in brass or stainless steel F = TPS Inner Tube 2: Brass Rubber Holders C: WRAS Approved X: Connection Combinations, where X can be replaced with any of the following: A = ½” BSP (F) x ½” BSP (F) B = ½” BSP (F) x M15x1 F = ½” BSP (F) x 3/8” BSP (M) H = ½” BSP (F) x 3/8” BSP (F) I = M15x1 x M15x1 L = M15x1 x 3/8” BSP (M) M = M15x1 x 3/8” BSP (F) Q = 3/8” BSP (M) x 3/8” BSP (M) R = 3/8” BSP (M) x 3/8” BSP (F) S = 3/8” BSP (F) x 3/8” BSP (F) T = ½” BSP (F) x M12x1 AABBCCCC.DDD Trade Name Explanation: AA: identifies hose raw material and diameter, which can be replaced with any of the following: AC = Brass CW508L 022 External diameter 14 AD = Brass CW508L 026 External diameter 14 AQ = Brass CW508L 022 External diameter 15 AR = Brass CW508L 026 External diameter 15 AV = Brass CW508L 022 External diameter 17 AW = Brass CW508L 026 External diameter 17 AF = INOX AISI 304 External diameter 14 AS = INOX AISI 304 External diameter 15 AX = INOX AISI 304 External diameter 17 AJ = Brass CW 508L 022 External diameter 12 BB: identifies the type of external finish, and can be replaced with any of the following: CR = Chromed CZ = Brushed Chrome GM = Raw Brass NS = Brushed Nickel NZ = Brushed Nickel Phosphor IG = Raw INOX IS = Brushed INOX PO = PVD Gold PA = PVD Gold Brushed PG = PVD Black Metal PB = PVD Black Metal Brushed PH = PVD Champagne Brushed PR = PVD Copper Bronze PE = PVD Copper Bronze Brushed PI = PVD Grey 07 Brushed PK = PVD High Brass PQ = PVD High Brass Brushed PM = PVD Pale Gold Brushed PC = PVD Rose Gold Family Surface finishes: Raw, Chromed, Electropolished, Polished, Various Galvanics Finishing, Various PVD Finishing, Various Paint Finishing. CCCC: identifies the type of fittings, which can be replaced with any of the following: Any combination of (2) alphanumeric characters denoting only external aesthetic fittings dimensions. All of fittings are unwetted. DDD: identifies the length (between 50 and 200cm), and can be replaced with any of the following as examples: 050 = 50cm length, 100 = 100cm length, 150 = 150cm length, 200 = 200cm length.

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company