Samuel Heath & Sons Plc Approvals


#240402052

Single hole, single outlet (fixed) over the rim swivel nozzle bidet combination tap assembly (brass body - various finishes) with a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a lever operated pop-up waste (not verified by test). Maximum working pressure 5.0 Bar. Maximum operating temperature 60.0°C.

Section:
0400 Combination Tap Assemblies - Bidet
Description:
Single hole bidet tap with a single outlet fixed spout with swivel nozzle.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP Captive nut end connections.
Marking:
SHS logo on underside of operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/04/2029
Model:
V6K19-YY-XX Where the product code suffix ‘YY’ denotes the lever options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: M = Metal Levers, MB = Metal Levers Black. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, CTB = City Bronze.

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#240502024

Range of single-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes) incorporating ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener. Model (V108-XX) is supplied with a lever operated pop-up waste. Maximum working pressure: 5.0 Bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Description:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
No testing performed on pop up waste.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies, with ½” captive nut end connections.
Marking:
Samuel Heath on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2029
Model:
V108-XX V128-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#240602069

Range of stainless steel or brass double interlocking, TPS lined flexible hose assemblies (various finishes) incorporating EPDM gaskets. Maximum operating temperature 60°C. Open Outlet Use Only

Section:
1863 Tubes
Description:
Elastomeric.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model
Marking:
SHS on end connections.
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
V165W-XX 1/2" Female Connection D17, V940W-XX 1/2" Female Connection D17, V941W-XX 1/2" Female Connection D17, V942W-XX 1/2" Female Connection D17. FXF2CX Trade Name Explanation: FX = Double interlock hose in brass or stainless steel F = TPS Inner Tube 2: Brass Rubber Holders C: WRAS Approved X: Connection Combinations, where X can be replaced with any of the following: A = ½” BSP (F) x ½” BSP (F) B = ½” BSP (F) x M15x1 F = ½” BSP (F) x 3/8” BSP (M) H = ½” BSP (F) x 3/8” BSP (F) I = M15x1 x M15x1 L = M15x1 x 3/8” BSP (M) M = M15x1 x 3/8” BSP (F) Q = 3/8” BSP (M) x 3/8” BSP (M) R = 3/8” BSP (M) x 3/8” BSP (F) S = 3/8” BSP (F) x 3/8” BSP (F) T = ½” BSP (F) x M12x1 AABBCCCC.DDD Trade Name Explanation: AA: identifies hose raw material and diameter, which can be replaced with any of the following: AC = Brass CW508L 022 External diameter 14 AD = Brass CW508L 026 External diameter 14 AQ = Brass CW508L 022 External diameter 15 AR = Brass CW508L 026 External diameter 15 AV = Brass CW508L 022 External diameter 17 AW = Brass CW508L 026 External diameter 17 AF = INOX AISI 304 External diameter 14 AS = INOX AISI 304 External diameter 15 AX = INOX AISI 304 External diameter 17 AJ = Brass CW 508L 022 External diameter 12 BB: identifies the type of external finish, and can be replaced with any of the following: CR = Chromed CZ = Brushed Chrome GM = Raw Brass NS = Brushed Nickel NZ = Brushed Nickel Phosphor IG = Raw INOX IS = Brushed INOX PO = PVD Gold PA = PVD Gold Brushed PG = PVD Black Metal PB = PVD Black Metal Brushed PH = PVD Champagne Brushed PR = PVD Copper Bronze PE = PVD Copper Bronze Brushed PI = PVD Grey 07 Brushed PK = PVD High Brass PQ = PVD High Brass Brushed PM = PVD Pale Gold Brushed PC = PVD Rose Gold Family Surface finishes: Raw, Chromed, Electropolished, Polished, Various Galvanics Finishing, Various PVD Finishing, Various Paint Finishing. CCCC: identifies the type of fittings, which can be replaced with any of the following: Any combination of (2) alphanumeric characters denoting only external aesthetic fittings dimensions. All of fittings are unwetted. DDD: identifies the length (between 50 and 200cm), and can be replaced with any of the following as examples: 050 = 50cm length, 100 = 100cm length, 150 = 150cm length, 200 = 200cm length.

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#240902002

Range of deck mounted flow control valves (brass bodies - various finishes) incorporating a quarter turn ceramic disc headwork and a single lever or cross top operating member. Maximum working pressure 5.0 Bar Maximum operating temperature 85.0°C

Section:
2170 Valves
Description:
Flow control, manually operated.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP M
Marking:
SHS on underside of operating member.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
V6K42YY-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered. Where the product code suffix YY denotes the controller options. It will always be 1,2 or 3 digits, which can be any combination of letters. As examples: M = Metal Levers, or XB = Cross Tops Black.

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#240902035

Range of shower handsets with brass bodies (various finishes). The inlets incorporate a plastic flow regulator and an approved single check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 85°C.

Section:
1650 Shower Outlets
Description:
Shower heads and shower handsets
Open outlet use only.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
SHS on handset
Installation Requirements:
R001 R040
Expiry date:
30/09/2029
Model:
V654W-XX V654WB-XX V254W-YY-XX V255W-YY-XX V256W-YY-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#240902036

Concealed three-way diverter valve with various body finishes and EPDM ‘O’-rings. Also supplied with various trim sets. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C.

Section:
2050 Diverter Valves
Description:
Diverter cartridge with manual adjustment.
The V168-IS-XX is not approved in its own right. It must always be installed in conjunction with one of the trim sets noted in the model section
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
SHS on underside of operating member and/or trim body (All Trim Kits excluding V168-T-XX). SHS on outside edge of escutcheon (Trim Kit V168-T-XX Only)
Installation Requirements:
R001 R040
Expiry date:
30/09/2029
Model:
Divertor Only: V168-IS-XX: Concealed 3 Way Divertor Rough which must be installed in conjunction with the following trim sets. Trim Sets for V168-IS-XX: V768-TLK-XX: Industrial Trim Set for V168-IS - Lever. V768-TXK-XX: Industrial Trim Set for V168-IS - Cross Top. V768-TLF-XX: Pure Trim Set for V168-IS - Lever. V768-TXF-XX: Pure Trim Set for V168-IS - Cross Top. V668-TM-XX: Style Moderne Trim Set for V168-IS - Lever. V668-TMB-XX: Style Moderne Trim Set for V168-IS - Black Lever. V668-TX-XX: Style Moderne Trim Set for V168-IS - Cross Top. V668-TXB-XX: Style Moderne Trim Set for V168-IS - Black Cross Top. V268-TM-XX: Fairfield Trim Set for V168-IS - Metal Lever. V268-TC-XX: Fairfield Trim Set for V168-IS - Ceramic Lever. V268-TGBC-XX: Fairfield Trim Set for V168-IS - Black Chrome Lever. V268-TW-XX: Fairfield Trim Set for V168-IS - Wooden Lever. V268-TX-XX: Fairfield Trim Set for V168-IS - Cross Top. V268-TSC-XX: Fairfield Trim Set for V168-IS - Clear Crystal Lever. V268-TSB-XX: Fairfield Trim Set for V168-IS - Black Crystal Lever. V168-T-XX: Xenon Trim Set for V168-XX. T2068-CTL-XX: Trim set for V168-IS - Single lever. T2068-COX-XX: Trim set for V168-IS - Cross top. T2068-COL-XX: Trim set for V168-IS - Single lever. T2068-CBA-XX: Trim set for V168-IS - T-type lever. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#240902038

Range of deck mounted flow control valves which incorporate a quarter-turn ceramic disc headworks with either T shaped, cross top, single lever or dome type operating members. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:
2170 Valves
Description:
Flow control, manually operated.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M)
Marking:
SHS on operating member
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
T20K42-CTR-XX (Single lever) T20K42-CTL-XX (Single lever) T20K42-CPR-XX (Dome) T20K42-COX-XX (Cross top) T20K42-COR-XX (Dome) T20K42-COL-XX (Single lever) T20K42-CGR-XX (Dome) T20K42-CBA-XX (T shaped) Where XX denotes the surface finish, it will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome URM = urban brass matt lacquered

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#240402051

Range of floor mounted single hole, single outlet (fixed) combination tap assembly (brass body, various finishes). Incorporating a ceramic cartridge headwork with a lever operating member and a self-cancelling diverter to shower outlet. The shower outlet connection incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:
0465 Combination Tap Assemblies
Description:
Single hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
The products are supplied with a shower hose or handset.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
N/A (only to be used with compatible Samuel Heath & Sons plc products)
Marking:
Samuel heath on front of body
Installation Requirements:
R001 R030
Expiry date:
30/04/2029
Model:
T20K36-CTL-XX T20K36-CTR-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#250102003

Range of brass ceiling mounted shower tubes, in a variety of finishes. For use with copper pipe to EN 1057. Maximum operating temperature 80.0°C

Section:
1650 Shower Outlets
Description:
Shower heads and shower handsets
Open outlet use only.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression x ½” male BSP
Marking:
Samuel Heath Logo on outlet connection of body
Installation Requirements:
R001 R040
Expiry date:
31/01/2030
Model:
V169-XX Xenon & V269-XX Fairfield. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, MBC = Matt Black Chrome.

Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#241102030

Range of four-hole, single outlet, fixed, combination tap assemblies (brass bodies - various finishes) incorporating quarter turn ceramic disc headworks with various operating members (see models). The products incorporate a self-cancelling diverter to shower outlet. The spout outlets incorporate a plastic flow straighter. The product is not supplied with a shower hose and handset. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0680 Combination Tap Assemblies
Description:
Multi hole tap with a single outlet and a swivel spout , incorporating a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3).
The product is not supplied with a shower hose and handset.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (M)
Marking:
Samuel Heath on spout
Installation Requirements:
R001 R006 R030
Expiry date:
30/11/2029
Model:
V7K48-1YY-XX V7K48-2YY-XX Where the product code suffix YY denotes the controller options. It will always be 1,2 or 3 digits, which can be any combination of letters. As examples: LF = Pure Levers, or XK = Industrial Cross Tops. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered. Connections are only for use with copper pipe manufactured to BS EN 1057.

Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 9 of 10

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.