Range of wall mounted two-hole, single outlet (fixed) combination tap assemblies, (brass bodies – various finishes), incorporating ceramic cartridge headworks, the spout outlet incorporates a plastic aerator. The spout inlet Incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed.

WRAS Approval Number:

2306030

Expiry date:

30/06/2028

Note:

The products are to be used in conjunction with V720-LH-IS-XX (Installation Kit - LH). V720-RH-IS-XX (Installation Kit – RH).

Size:

½” BSP (F)

Marking:

Samuel heath on faceplate

Installation Requirements:

R001 R010 R040

Model:

V720-1FLH-XX V720-1FRH-XX V720-2FLH-XX V720-2FRH-XX V720-3FLH-XX V720-3FRH-XX V720-1KLH-XX V720-1KRH-XX V720-2KLH-XX V720-2KRH-XX V720-3KLH-XX V720-3KRH-XX V720-1FNP-XX V720-2FNP-XX V720-3FNP-XX V720-1KNP-XX V720-2KNP-XX V720-3KNP-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (brass body – various finishes), incorporating ceramic cartridge headworks with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2306033

Expiry date:

30/06/2028

Size:

Stainless steel braided, EPDM lined flexible hose assembly with a ½” BSP (F) captive nut end connections.

Marking:

SHS logo on spout

Installation Requirements:

R001 R010 R006

Model:

T2010-YY-XX Where the product code suffix ‘YY’ denotes the lever options. It will always be 1,2 or 3 digits, which can be any combination of letters. As examples: LK = Industrial Lever, CTL = Lever two Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = Urban brass matt lacquered

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Range of shower arms and elbows (brass bodies – various finishes). Maximum operating temperature: (T2064W) - 95.0°C (T2062W, T2069W & T2069SW) - 85.0°C (T2066W) - 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2306063

Expiry date:

30/06/2028

Note:

Open outlet use only.

Size:

½” BSP (M) 15mm compression X ½” BSP (F) elbow (T2062W)

Marking:

SHS on body

Installation Requirements:

R001 R040

Model:

T2062W T2064W T2066W T2069W T2069SW Models: For_me T2062W-XX, T2064W-XX, T2066W-XX, T2069W-XX, T2069SW-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, or URM = Urban Brass Matt Lacquered.

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Wall mounted shower arm with a chrome plated brass body.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2309038

Expiry date:

30/09/2028

Note:

Open outlet use only.

Size:

½” BSP M

Marking:

SHS on body

Installation Requirements:

R001 R040

Model:

T162W-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Concealed, wall mounted, three-hole, single outlet (fixed) combination tap assembly (brass body - various finishes) incorporating quarter turn ceramic disc headwork. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole, metal, single outlet, fixed.

WRAS Approval Number:

2309053

Expiry date:

30/09/2028

Note:

The products are to be used with V718-IS-XX rough kit, however, the rough kit is not part of this approval.

Size:

3/4” BSP (M) (Headwork & Spout) specifically for use with rough kit V718-IS-XX which has 3/4" BSP (F)

Marking:

SHS on spout.

Installation Requirements:

R001 R010 R040

Model:

T20K47-YY-XX Model added March 2024: One Hundred Collection T11K47-YY-XX Where the product code suffix ‘YY’ denotes the lever options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: COL = Lever One, or CBA = T-Bar. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, or URM = Urban Brass Matt Lacquered.

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Wall mounted thermostatic shower valve (brass body - various finishes and trim sets), incorporating a thermostatic cartridge controlling the flow and temperature with a single lever or cross top operating members with a manual override button. The inlets incorporate a stainless-steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 85°C

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

2310037

Expiry date:

31/10/2028

Note:

This approval does not include a shower hose, shower riser, overhead shower or shower handset.

Size:

1/2" BSP (M)

Marking:

Samuel Heath on body

Installation Requirements:

R001 R010 R040

Model:

V640-XX Style Moderne ½” Exposed thermostatic shower valve. To be used in conjunction with the following controller variations: V621-TM-XX Trim Set Metal Lever V621-TMB-XX Trim Set Metal Lever – Black V621-TX-XX Trim Set Cross Top V621-TXB-XX Trim Set Cross Top – Black V621-TD-XX Trim Set Luxe Roundel Where the product code suffix XX denotes the surface finish. It will always be 2 or 3 digits, which can be a combination of numbers and/or letters. As examples: CP = Chrome Finish, or URM = Urban Brass Matt Lacquered.

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Two-hole, single outlet (fixed) combination tap assembly, (brass body - various finishes), incorporating quarter turn ceramic disc headworks with various operating members, and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The inlet to the shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models are supplied with a shower hose and handset. The shower handset incorporates a plastic flow restrictor on the inlet. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.

WRAS Approval Number:

2311703

Expiry date:

1/12/2028

Size:

¾” BSP (M)

Marking:

Samuel Heath on body.

Installation Requirements:

R001 R006 R020

Model:

V630-XX Bath Shower Mixer Deck Mounted Model without controllers: V630-XX Bath / Shower Mixer Deck Mounted Controller options: V651-MB-XX = Metal Levers V651-MBB-XX = Gloss Black Levers V651-XB-XX = Cross Tops V651-XB-GBC = Gloss Black Chrome Cross Tops V651-BCQ-XX = Black Quilted Crystal Levers V651-CCQ-XX = Clear Quilted Crystal Levers V651-BCR-XX = Black Radiant Crystal Levers V651-CCR-XX = Clear Radiant Crystal Levers V651-L-XX = Luxe Levers V651-D-XX = Luxe Roundels Models with controllers: V6K30M-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-MB-XX Lever(s). V6K30MB-XX Bath /Shower Mixer includes V630-XX Mixer, V654B-XX Handset, V942-W-XX Hose with V650-MBB-XX andV651-MBB-XX Lever(s). V6K30X-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-XB-XX Lever(s). V6K30XB-XX Bath /Shower Mixer includes V630-XX Mixer, V654B-XX Handset, V942-W-XX Hose with V650-MBB-XX and V651-XB-GBC-XX Lever(s). V6K30L-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-L-XX Lever(s). V6K30D--XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-D-XX Lever(s). V6K30BCQ-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-BCQ-XX Lever(s). V6K30CCQ--XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-CCQ-XX Lever(s). V6K30BCR-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-BCR-XX Lever(s). V6K30CCR-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-CCR-XX Lever(s). Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, BGM = Brushed Gold Matt Lacquered.

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Wall mounted, two-hole, single outlet (fixed) combination tap assembly, (brass body - various finishes), incorporating quarter turn ceramic disc headworks with various operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener, and the shower outlet connection incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models are supplied with a shower hose and handset. The shower handset incorporates a plastic flow restrictor on the inlet. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.

WRAS Approval Number:

2310066

Expiry date:

31/10/2028

Size:

¾” BSP (M) to ¾” BSP (M) Offset Unions

Marking:

Samuel Heath on body.

Installation Requirements:

R001 R020

Model:

V632-XX Bath Shower Mixer Wall Mounted Model without controllers, hose & handset: V632-XX Bath / Shower Mixer Wall Mounted Controller options for these mixers: V651-MB-XX = Metal Levers V651-MBB-XX = Gloss Black Levers V651-XB-XX = Cross Tops V651-XB-GBC = Gloss Black Chrome Cross Tops V651-BCQ-XX = Black Quilted Crystal Levers V651-CCQ-XX = Clear Quilted Crystal Levers V651-BCR-XX = Black Radiant Crystal Levers V651-CCR-XX = Clear Radiant Crystal Levers V651-L-XX = Luxe Levers V651-D-XX = Luxe Roundels Models with controllers: V6K32M-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-MB-XX Lever(s). V6K32MB-XX Bath /Shower Mixer includes V630-XX Mixer, V654B-XX Handset, V942-W-XX Hose with V650-MBB-XX andV651-MBB-XX Lever(s). V6K32X-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-XB-XX Lever(s). V6K32XB-XX Bath /Shower Mixer includes V630-XX Mixer, V654B-XX Handset, V942-W-XX Hose with V650-MBB-XX and V651-XB-GBC-XX Lever(s). V6K32L-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-L-XX Lever(s). V6K32D--XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-D-XX Lever(s). V6K32BCQ-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-BCQ-XX Lever(s). V6K32CCQ--XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-CCQ-XX Lever(s). V6K32BCR-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-BCR-XX Lever(s). V6K32CCR-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-CCR-XX Lever(s). Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, BGM = Brushed Gold Matt Lacquered.

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Range of wall mounted shower arms, (brass bodies - various finishes) incorporating EPDM ‘O’- rings.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2401703

Expiry date:

31/01/2029

Note:

Open outlet use only.

Size:

15mm compression x ½” BSP (M) (V162W-XX & V262W-XX) or ½” BSP (M) (V662W-XX)

Marking:

SHS on body

Installation Requirements:

R001 R040

Model:

V162W-XX, V262W-XX, V662W-XX. Where XX denotes the finish and can be replaced with any of the following: Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 3.0 Bar

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2311019

Expiry date:

30/11/2028

Size:

Stainless steel braided PEX lined flexible hose assemblies with 1/2" BSP captive nut end connections.

Marking:

Samuel Heath on body

Installation Requirements:

R001 R006 R009 R010

Model:

V7K32YY-XX Models: Landmark V7K32YY-XX Controllers V759-LF-XX, V759-LK-XX, V759-LL-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, URM = Urban Brass Matt Lacquered. Where the product code suffix ‘YY’ denotes the lever options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: LK = Industrial Lever, or LF = Pure Lever

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company