Pegler Yorkshire Group Ltd Approvals


WRAS Approval Number: 1608803

Range of adjustable in-line DZR brass pressure reducing valves with NBR rubber seal and ‘O’-rings incorporating tectite push-fit fittings on both the inlet and the outlet. For use with stainless steel pipe only. Maximum inlet pressure 16.0 bar. Maximum outlet pressure 6.0 bar. Minimum outlet pressure 1.0 bar. Maximum operating temperature 65°C.

  • Section: 2200 Valves
  • Section Subtitle: Pressure reducing.
  • WRAS Approval Number: 1608803
  • Expiry date: 31/08/2021
  • Size: 15mm push fit inlet/outlet
  • Marking: Size, pressure rating, CR, Pegler logo & flow arrow on body.
  • Installation Requirements R001 R120
  • Model
    PT5 PRV
  • Factor: Pegler Yorkshire Group Ltd
    Company Name
    Pegler Yorkshire Group Ltd
    Address
    St. Catherine's Ave Doncaster South Yorkshire
    Postcode
    DN4 8DF
    Phone
    0844 243 440
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1607066

‘Tectite Sprint’ range of pushfit fittings manufactured from either copper or DZR brass. The fittings comprise of stainless steel grab rings and EPDM ‘O’ rings. Fittings are for use with polybutylene barrier pipe (manufactured to BS 7291: Part 2) and cross linked PEX barrier pipe (manufactured to BS 7291: Part 3). From September 2016 10, 15, 22 & 28mm are also for use with copper pipe. Sizes added September 2016: 35mm, 42mm & 54mm for use with copper pipe only. Maximum working pressures & temperatures: For use with Polybutylene and PEX 12.0bar @ 20°C & 3bar @ 92°C. For use with Copper 20.0 bar @ 24°C, 20.0 bar @ 30°C, 16.0 bar @ 65°C & 10.0 bar @ 100°C.

  • Section: 1180 Fittings for use with Tube and Pipe
  • Section Subtitle: Couplings.
  • WRAS Approval Number: 1607066
  • Expiry date: 31/07/2021
  • Size: 10mm, 15mm, 22mm and 28mm push fit for use with polybutylene barrier pipe (manufactured to BS 7291: Part 2) and cross linked PEX barrier pipe (manufactured to BS 7291: Part 3) From September 2016 10, 15, 22 & 28mm are also for use with copper pipe. Sizes added September 2016: 35mm, 42mm & 54mm for use with copper pipe only.
  • Marking: YF logo and size on body
  • Installation Requirements R001
  • Model
    ‘Tectite sprint’ range - model numbers TT1, TT1R, TT2, TT3, TT5, TT6, TT12, TT12s, TT13, TT14, TT15, TT21, TT21s, TT24, TT25, TT26, TT27, TT30, TT61, TT62, TT63, TT69
  • Factor: Pegler Yorkshire Group Ltd
    Company Name
    Pegler Yorkshire Group Ltd
    Address
    St. Catherine's Ave Doncaster South Yorkshire
    Postcode
    DN4 8DF
    Phone
    0844 243 440
    View All Listings by this Company
  • Manufacturer: Yorkshire Fittings Gyártó Kft.
    Company Name
    Yorkshire Fittings Gyártó Kft.
    Address
    Maglodi ut 16, Budapest, Hungary,
    Postcode
    H-1106
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1612703

Range of in line regulating valves with DZR brass bodies, EPDM and NBR `O` rings and PTFE valve seals. The valves incorporate a non-rising spindle headwork regulating the flow and isolation function. For above ground use only. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

  • Section: 1530 Miscellaneous Fittings
  • WRAS Approval Number: 1612703
  • Expiry date: 31/12/2021
  • Size: ½”, ¾”, 1”, 1¼”, 1½” and 2” BSP female inlets and outlets
  • Marking: Flow arrow, PN, size, logo and CR on body
  • Installation Requirements R001
  • Model
    1200 SF range consisting of models: 126002, 126003, 126004, 126005, 126006 & 126007
  • Factor: Pegler Yorkshire Group Ltd
    Company Name
    Pegler Yorkshire Group Ltd
    Address
    St. Catherine's Ave Doncaster South Yorkshire
    Postcode
    DN4 8DF
    Phone
    0844 243 440
    View All Listings by this Company
  • Manufacturer: Pegler (Jiangmen) Plumbing & Heating
    Company Name
    Pegler (Jiangmen) Plumbing & Heating
    Address
    98 Longxi High Tech Zone Jiangmen City
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609104

Range of in-line, non-verifiable single check valve assemblies with DZR brass bodies and spring loaded, resilient trim check valve cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 90ºC.

  • Section: 0030 Backflow Prevention Devices
  • Section Subtitle: SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
  • WRAS Approval Number: 1609104
  • Expiry date: 30/09/2021
  • Marking: Kuterlite, flow arrow, CR, size and pressure & temperature rating on body
  • Installation Requirements R001
  • Model
    Kuterlite K424 range: 42062 (15mm compression), 42063 (22mm compression) & 42064 (28mm compression). Kuterlite K426 range: 42065 (½” BSP F), 42066 (¾ BSP F), 42067 (1” BSP F), 42077 (1¼” BSP F), 42078 (1½” BSP F) & 42079 (2” BSP F).
  • Factor: Pegler Yorkshire Group Ltd
    Company Name
    Pegler Yorkshire Group Ltd
    Address
    St. Catherine's Ave Doncaster South Yorkshire
    Postcode
    DN4 8DF
    Phone
    0844 243 440
    View All Listings by this Company
  • Manufacturer: Pegler (Jiangmen) Plumbing and Heating Equipment Co. Ltd.
    Company Name
    Pegler (Jiangmen) Plumbing and Heating Equipment Co. Ltd.
    Address
    98 Long Xi Road Jiangmen City Guangdong Province
    Postcode
    529000
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609105

Kuterlite K4424, Kuterlite K4424CP, Kuterlite K4426 and TX802 ranges of double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies (K4424CP chromium plated DZR bass) K4424, K4424 & K4426 - Maximum working pressure 10 Bar. Maximum working temperature 90°C. TX802 Maximum working pressure 20.0 bar @ 30°C, 16.0 bar @ 65°C & 10.0 bar @ 100°C for use with copper tube (manufactured to BS 2871).

  • Section: 0034 Backflow Prevention Devices
  • Section Subtitle: SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
  • WRAS Approval Number: 1609105
  • Expiry date: 30/09/2021
  • Size: Kuterlite K4424 range: 15mm compression inlet/outlet, 22mm compression inlet/outlet, 28mm compression inlet/outlet. Kuterlite K4424CP range: 15mm compression inlet/outlet. TX802 Range 15mm pushfit 66013 and 22mm pushfit 66014. Sizes added October 2016: Kuterlite K4426 ½” BSP (F) inlet/outlet, ¾” BSP (F) inlet/outlet, 1” BSP (F) inlet/outlet, 1 ¼” BSP (F) inlet/outlet, 1 ½” BSP (F) inlet/outlet, 2” BSP (F) inlet/outlet
  • Marking: Kuterlite, flow arrow, CR, size, pressure, temperature on body. TX802 range marked Tectite, size, DN , CR and flow arrow.
  • Installation Requirements R001
  • Model
    Kuterlite K4424 range: 15mm – 42068, 22mm – 42069, 28mm – 42070. Kuterlite K4424CP range: 15mm – 42090. TX802 Range 15mm pushfit 66013 and 22mm pushfit 66014. Models added October 2016: Kuterlite K4426 ½” (42071), ¾” (42072), 1” (42073), 1 ¼” (42074), 1 ½” (42075), 2” (42076)
  • Factor: Pegler Yorkshire Group Ltd
    Company Name
    Pegler Yorkshire Group Ltd
    Address
    St. Catherine's Ave Doncaster South Yorkshire
    Postcode
    DN4 8DF
    Phone
    0844 243 440
    View All Listings by this Company
  • Manufacturer: Pegler (Jiangmen) Plumbing and Heating Equipment Co. Ltd.
    Company Name
    Pegler (Jiangmen) Plumbing and Heating Equipment Co. Ltd.
    Address
    98 Long Xi Road Jiangmen City Guangdong Province
    Postcode
    529000
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1611075

Range of in line regulating valves DZR brass bodies, EPDM ‘O’-rings and PTFE seals. The valves incorporate a non-rising spindle headwork with hand wheel operating member regulating the flow and isolation function. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

  • Section: 1530 Miscellaneous Fittings
  • WRAS Approval Number: 1611075
  • Expiry date: 30/11/2021
  • Marking: Pegler logo, ‘CR’, PN rating, size and flow arrow on valve body.
  • Installation Requirements R001
  • Model
    ½” 1260MF – ITEM CODE 126043 ½” 1260LF – ITEM CODE 126022 ½” 1260ULF – ITEM CODE 126039 ½” 1260SF – ITEM CODE 126023 ¾” 1260SF – ITEM CODE 126024 1” 1260SF – ITEM CODE 126025 1.1/4” 1260SF – ITEM CODE 126026 1.1/2” 1260SF – ITEM CODE 126027 2” 1260SF – ITEM CODE 126028 MF = Medium Flow LF = Low Flow ULF = Ultra Low Flow SF = Standard Flow
  • Factor: Pegler Yorkshire Group Ltd
    Company Name
    Pegler Yorkshire Group Ltd
    Address
    St. Catherine's Ave Doncaster South Yorkshire
    Postcode
    DN4 8DF
    Phone
    0844 243 440
    View All Listings by this Company
  • Manufacturer: Pegler (Jiangmen) Plumbing & Heating
    Company Name
    Pegler (Jiangmen) Plumbing & Heating
    Address
    98 Longxi High Tech Zone Jiangmen City
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1701707

Range of copper end feed fittings for use with copper pipe. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

  • Section: 1210 Fittings for use with Tube and Pipe
  • Section Subtitle: End feed, for use with copper tube.
  • WRAS Approval Number: 1701707
  • Expiry date: 31/01/2022
  • Marking: ENDEX and size on body.
  • Installation Requirements R001
  • Model
    Endex range consisting of: N1 STRAIGHT COUPLING: 6mm to 54mm N1IM ADAPTOR COUPLING: 15mm x ½” to 28mm x 1” N1R REDUCING COUPLING: 8mm x 6mm to 54mm x 42mm N1SLIP STRAIGHT COUPLING SLIP: 12mm to 54mm N2 STRAIGHT FEMALE CONNECTOR: 10mm x 3/8" to 54mm x 2” N3 STRAIGHT MALE CONNECTOR: 10mm x 3/8" to 54mm x 2” N5 TANK CONNECTOR: 15mm x ½” to 28mm x 1” N6 REDUCER: 8mm x 6mm to 54mm x 42mm N7 FEMALE ADAPTOR: 15mm x ½” to 54mm x 2” N8 MALE ADAPTOR: 15mm x ½” to 54mm x 2” N9 ADAPTOR: ½” x 15mm to ¾” x 22mm N11 UNION COUPLING CONE FACE: 15mm to 54mm N12 ELBOW: 6mm to 54mm N12R REDUCING ELBOW: 22mm x 15mm to 22mm x 18mm N12S STREET ELBOW: 8mm to 54mm N13 MALE ELBOW: 12mm x 3/8” to 54mm x 2” N14 FEMALE ELBOW: 15mm x ½” to 54mm x 2” N15 BACKPLATE ELBOW: 15mm x ½” to 22mm x ¾” N15F BACKPLATE ELBOW: 12mm x ½” to 18mm x ¾” N18 SLOW BEND: 6mm to 54mm N18S SLOW STREET BEND: 12mm to 54mm N20 RETURN BEND: 12mm to 35mm N21 OBTUSE ELBOW 45°: 12mm to 54mm N21S OBTUSE STREET ELBOW 45°: 10mm to 54mm N22 PARTIAL CROSSOVER: 12mm to 22mm N23 FULL CROSSOVER: 12mm to 22mm N24 EQUAL TEE: 6mm to 54mm N25 TEE REDUCED BRANCH: 10mm x 10mm x 6mm to 54mm x 54mm x 42mm N26 TEE ONE END REDUCED: 12mm x 10mm x 12mm to 54mm x 42mm x 54mm N27 TEE ONE END AND BRANCH REDUCED: 12mm x 10mm x 10mm to 54mm x 42mm x 42mm N28 TEE BOTH ENDS REDUCED: 12mm x 12mm x 15mm to 35mm x 35mm x 42mm N29 FEMALE TEE: 15mm x ½” x 15mm to 22mm x ¾” x 22mm N29R FEMALE TEE: 22mm x ½” x 22mm to 28mm x ½” x 28mm N30 FEMALE TEE: 15mm x 15mm x ½” to 28mm x 28mm x 1” N30R FEMALE TEE: 22mm x 22mm x ½” to 35mm x 35mm x ½” N50 CROSS: 15mm to 28mm N61: 8mm to 54mm N61AV STOP END: 15mm N62 STRAIGHT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N63 BENT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N64 BENT UNION ADAPTOR: 15mm x ¾” to 28mm x 1¼” N64M ADAPTOR: 22mm x ¾” N65 BENT MALE UNION CONNECTOR: 15mm x ½” to 35mm x 1¼” N68 STRAIGHT UNION ADAPTOR: 15mm x ¾” to 28mm x 1¼” N68FF FLAT FACED UNION ADAPTOR: 22mm x ¾” N68 METER UNION: 22mm x ¾” N69 STRAIGHT MALE UNION CONNECTOR: 15mm x ½” to 54mm x 2” N69F UNION COUPLING: 15mm x ½” to 28mm x 1”
  • Factor: Pegler Yorkshire Group Ltd
    Company Name
    Pegler Yorkshire Group Ltd
    Address
    St. Catherine's Ave Doncaster South Yorkshire
    Postcode
    DN4 8DF
    Phone
    0844 243 440
    View All Listings by this Company
  • Manufacturer: Comap Industries SDH
    Company Name
    Comap Industries SDH
    Address
    46 Rue De L Industrie, 45-550 Saint Dennis, De L Hotel,
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1701708

Range of copper end feed fittings for use with copper pipe. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

  • Section: 1210 Fittings for use with Tube and Pipe
  • Section Subtitle: End feed, for use with copper tube.
  • WRAS Approval Number: 1701708
  • Expiry date: 31/01/2022
  • Marking: E and size on body.
  • Installation Requirements R001
  • Model
    Mercia E range consisting of: N1 STRAIGHT COUPLING: 6mm to 54mm N1IM ADAPTOR COUPLING: 15mm x ½” to 28mm x 1” N1R REDUCING COUPLING: 8mm x 6mm to 54mm x 42mm N1SLIP STRAIGHT COUPLING SLIP: 12mm to 54mm N2 STRAIGHT FEMALE CONNECTOR: 10mm x 3/8" to 54mm x 2” N3 STRAIGHT MALE CONNECTOR: 10mm x 3/8" to 54mm x 2” N5 TANK CONNECTOR: 15mm x ½” to 28mm x 1” N6 REDUCER: 8mm x 6mm to 54mm x 42mm N7 FEMALE ADAPTOR: 15mm x ½” to 54mm x 2” N8 MALE ADAPTOR: 15mm x ½” to 54mm x 2” N9 ADAPTOR: ½” x 15mm to ¾” x 22mm N11 UNION COUPLING CONE FACE: 15mm to 54mm N12 ELBOW: 6mm to 54mm N12R REDUCING ELBOW: 22mm x 15mm to 22mm x 18mm N12S STREET ELBOW: 8mm to 54mm N13 MALE ELBOW: 12mm x 3/8” to 54mm x 2” N14 FEMALE ELBOW: 15mm x ½” to 54mm x 2” N15 BACKPLATE ELBOW: 15mm x ½” to 22mm x ¾” N15F BACKPLATE ELBOW: 12mm x ½” to 18mm x ¾” N18 SLOW BEND: 6mm to 54mm N18S SLOW STREET BEND: 12mm to 54mm N20 RETURN BEND: 12mm to 35mm N21 OBTUSE ELBOW 45°: 12mm to 54mm N21S OBTUSE STREET ELBOW 45°: 10mm to 54mm N22 PARTIAL CROSSOVER: 12mm to 22mm N23 FULL CROSSOVER: 12mm to 22mm N24 EQUAL TEE: 6mm to 54mm N25 TEE REDUCED BRANCH: 10mm x 10mm x 6mm to 54mm x 54mm x 42mm N26 TEE ONE END REDUCED: 12mm x 10mm x 12mm to 54mm x 42mm x 54mm N27 TEE ONE END AND BRANCH REDUCED: 12mm x 10mm x 10mm to 54mm x 42mm x 42mm N28 TEE BOTH ENDS REDUCED: 12mm x 12mm x 15mm to 35mm x 35mm x 42mm N29 FEMALE TEE: 15mm x ½” x 15mm to 22mm x ¾” x 22mm N29R FEMALE TEE: 22mm x ½” x 22mm to 28mm x ½” x 28mm N30 FEMALE TEE: 15mm x 15mm x ½” to 28mm x 28mm x 1” N30R FEMALE TEE: 22mm x 22mm x ½” to 35mm x 35mm x ½” N50 CROSS: 15mm to 28mm N61: 8mm to 54mm N61AV STOP END: 15mm N62 STRAIGHT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N63 BENT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N64 BENT UNION ADAPTOR: 15mm x ¾” to 28mm x 1¼” N64M ADAPTOR: 22mm x ¾” N65 BENT MALE UNION CONNECTOR: 15mm x ½” to 35mm x 1¼” N68 STRAIGHT UNION ADAPTOR: 15mm x ¾” to 28mm x 1¼” N68FF FLAT FACED UNION ADAPTOR: 22mm x ¾” N68 METER UNION: 22mm x ¾” N69 STRAIGHT MALE UNION CONNECTOR: 15mm x ½” to 54mm x 2” N69F UNION COUPLING: 15mm x ½” to 28mm x 1”
  • Factor: Pegler Yorkshire Group Ltd
    Company Name
    Pegler Yorkshire Group Ltd
    Address
    St. Catherine's Ave Doncaster South Yorkshire
    Postcode
    DN4 8DF
    Phone
    0844 243 440
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610359

Range of Y type strainers with blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1610359
  • Expiry date: 31/10/2021
  • Size: DN50 to DN300
  • Marking: Pegler, model & technical info on data plate
  • Installation Requirements R001
  • Model
    V912 DUCTILE IRON Y TYPE STRAINER DN50-300
  • Factor: Pegler Yorkshire Group Ltd
    Company Name
    Pegler Yorkshire Group Ltd
    Address
    St. Catherine's Ave Doncaster South Yorkshire
    Postcode
    DN4 8DF
    Phone
    0844 243 440
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702054

YP500 and Kuterlite Ranges of screw down stop valves with Gunmetal bodies, DZR brass headworks and EPDM seat washers. Maximum working pressure 16.0 bar. Maximum working temperature 30°C.

  • Section: 2310 Valves
  • Section Subtitle: Stop, metal, screw down.
  • WRAS Approval Number: 1702054
  • Expiry date: 28/02/2022
  • Marking: Manufacturer’s logo (YF), size & flow arrow on body.
  • Installation Requirements R001
  • Model
    YP500 range – for use with copper pipe only YP501GM – 15mm (05269), 22mm (05270), 28mm (05271), 35mm (05305), 42mm (05306) & 54mm (05307). YP501DZR – 15mm (05302), 22mm (05303) & 28mm (05304). YP508 – 15mm (05441) & 22mm (05442). Kuterlite range K771 – 20mm (67401) & 25mm (67402) – for use with PEX pipe. K771DZR – 32mm (67406) – for use with PEX pipe. K777 – 20x15 (67410), 25x15 (67412), 25x22 (67411) – for use with PEX & copper pipe.
  • Factor: Pegler Yorkshire Group Ltd
    Company Name
    Pegler Yorkshire Group Ltd
    Address
    St. Catherine's Ave Doncaster South Yorkshire
    Postcode
    DN4 8DF
    Phone
    0844 243 440
    View All Listings by this Company
  • Manufacturer: Yorkshire Fittings Gyártó Kft.
    Company Name
    Yorkshire Fittings Gyártó Kft.
    Address
    Maglodi ut 16, Budapest, Hungary,
    Postcode
    H-1106
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 4