Neoperl GmbH Approvals


#1904800

Spring loaded, resilient trim, in-line check valve cartridges with plastic guide, stem and body and NBR or EPDM rubber `O`-rings. For insertion into pipes or fittings with specifically dimensioned bores. Maximum working pressure 16.0 bar. For maximum operating temperature please refer to model.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
1904800
Expiry date:
30/04/2024
Size:
See model
Marking:
Neoperl, flow arrow, WRAS and size on body
Installation Requirements:
R001
Model:
Maximum operating temperature 60°C: OV15/DN15-EPDM 31.0001.0. OF20/DN20 31.4520.0. OF20/DN20-EPDM 31.0057.0. Maximum operating temperature 85°C: OV15/DN15-pr 31.0070.0 OV20-DN20-pr 31.0072.0 OV40/DN40 31.4240.0 OV50/DN50 31.4250.0 OF15/DN10-F1 31.0015.0 OF15/DN10-F1-pr 31.0074.0 OF15/DN15 31.0006.0 OF15/DN15-EPDM 31.0032.0 OF15/DN15-GF 31.0007.0 OF15/DN15-pr 31.0069.0 OF20/DN20-PR 31.4289.0 Maximum operating temperature 90°C: OV15/DN15-HT 31.0022.0 OV20/DN20-HT 31.0012.0 OV25/DN25-HT 31.0028.0 OF15/DN15-HT 31.0024.0
Factor:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Phone
0049 7631 1880
General Email
approvals@neoperl.de

View All Listings by this Company
Manufacturer:
Neoperl UK Ltd & Neoperl GmbH
Company Name
Neoperl UK Ltd & Neoperl GmbH
Address
Nimrod Works Enigma Park Malvern
Postcode
WR14 3GH
Phone
+44 (0) 1684 564869 Fax: 01684 561222
General Email

View All Listings by this Company

Print This Approval


#1905800

Spring loaded, resilient trim, in-line check valve cartridges with plastic guide, stem and body and silicone (30.4073.0 model) or EPDM (30.4075.0 model) `O’ ring and seal. For insertion into pipes or fittings with specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
1905800
Expiry date:
31/05/2024
Size:
DN15
Marking:
DW20, flow arrow, DN15 on body.
Installation Requirements:
R001
Model:
DW20/DN15-1T 30.4073.0 & DW20/DN15-EPDM 30.4075.0.
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Phone
0049 7631 1880

View All Listings by this Company

Print This Approval


#1904348

Range of polyamide (PA) braided PEX lined flexible hose assemblies with brass end connections, EPDM washers and fibre washers. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
1904348
Expiry date:
30/04/2024
Size:
Bore diameters: DN6 & DN8 End connections: Female elbow (BSP captive nut): ⅜”, ½”, ¾”. Female (BSP captive nut): ⅜”, ½”, ¾”, 7/16”, 9/16”. Tube: 8mm to 12mm. Male (BSP): M10 to M15. Male (BSP): ⅜”, ½,” ¾”, 7/16”, 9/16” Comp. joint: ø8 - ø15 Plugin: D8- D13 Size added July 2021: Male: M8
Marking:
Neoperl, Softpex, WRAS and date of manufacture (YYMMDD) on crimped connector
Installation Requirements:
R001 R008
Model:
Softpex range: 39.00CD.EFG.HI Where: CD.EFG = hose specification including fitting specification (00.000 – 99.999). HI = Packaging information (0-9).
Factor:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Phone
0049 7631 1880
General Email
approvals@neoperl.de

View All Listings by this Company
Manufacturer:
Neoperl GmbH, NPI Italia Srl, Neoperl (Xinhui) Ltd, Neoperl Nordic A/S, Neoperl Iberica S.A, Neoperl Bulgaria
Company Name
Neoperl GmbH, NPI Italia Srl, Neoperl (Xinhui) Ltd, Neoperl Nordic A/S, Neoperl Iberica S.A, Neoperl Bulgaria
Address
General Email

View All Listings by this Company

Print This Approval


#2001501

‘Neoperl Softpex® hose inliner’. Single layered, extruded, colourless (transparent) PEX-a tube. For use with water up to 70°C.

Section:
5140 Hoses & Tubing
WRAS Approval Number:
2001501
Expiry date:
31/01/2025
Model:
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Phone
0049 7631 1880

View All Listings by this Company

Print This Approval


#1908548

'Dome screen d18.2 (natural, appears white coloured), CV Housing DW13 (pastel green) & CV Housing DW13 (light blue)'. Injection moulded polypropylene components. For use with water up to 85°C.

Section:
5260 Polypropylene
Section Subtitle:
Components.
WRAS Approval Number:
1908548
Expiry date:
31/08/2024
Model:
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Phone
0049 7631 1880

View All Listings by this Company

Print This Approval


#1912301

Range of polyethylene lined, stainless steel braided or polyamide braided hoses with various brass end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
1912301
Expiry date:
31/12/2024
Size:
Bore Diameter DN8 End connections - 8mm to 12mm compression, ⅜”, ½” & ¾” female elbow, ⅜”, ½”, ¾”, 7/16, 9/16 female straight, ⅜”, ½”, ¾”, 7/16”, 9/16” male straight, M8 - M15 male, plug in D8 & D13.
Marking:
Neoperl logo, FLEX CORE®, WRAS, Temp rating, pressure rating, size, date of manufacture (YYMMDD) on ferrule
Installation Requirements:
R001 R008
Model:
FLEX CORE® Range: 39.06CD.EFG.HI
Factor:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Phone
0049 7631 1880
General Email
approvals@neoperl.de

View All Listings by this Company
Manufacturer:
Neoperl GmbH, NPI Italia Srl, Neoperl (Xinhui) Ltd, Neoperl Nordic A/S & Neoperl Bulgaria EOOD
Company Name
Neoperl GmbH, NPI Italia Srl, Neoperl (Xinhui) Ltd, Neoperl Nordic A/S & Neoperl Bulgaria EOOD
Address
Neoperl GmbH: Klosterrunstrasse 9-11, Müllheim, D-79379. NPI Italia Srl: Via Velleia 19, 20900 Monza, Italy.
General Email

View All Listings by this Company

Print This Approval


#1904028

FSG range of push to open, push to close ‘detent’ headworks with plastic bodies and EPDM ‘O’-rings. For insertion into specifically dimensioned bores. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:
0440 Headworks
WRAS Approval Number:
1904028
Expiry date:
30/04/2024
Size:
Ø 23.75mm Models added July 2020: Ø 26mm OD
Marking:
7880 and serial number on body.
Installation Requirements:
R001
Model:
FSG Range: FSG D6 (part code: 18.4100.0) - Size D6, FSG D6-I snap-fit (part code: 18.4106.0) - Size D6, FSG D6-i-hd snap-fit (part code: 18.4107.0) - Size D6, FSG D6 snap-fit (part code: 18.4109.0) - Size D6, FSG D6 Bolt fit (part code: 18.4112.0) - Size D6. Models added July 2020: FSG D8 Snap Fit (part code: 18.4150.0) – Size D8. FSG D8 Bolt Fit (part code: 18.4151.0) – Size D8.
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Phone
0049 7631 1880

View All Listings by this Company

Print This Approval


#2005316

Range of stainless steel braided, PEX lined hoses incorporating various brass end connection configuration options. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2005316
Expiry date:
31/05/2025
Note:
Please note that DN6 & DN8 hoses are manufactured at all sites. DN10, DN13 & DN15 hoses are manufactured only by NPI Italia Srl. & Neoperl Nordic A/S.
Size:
Bore diameters DN6 & DN8 may be supplied with the following end connections: Female elbow ⅜, ½, ¾”. Female ⅜, ½, ¾, 7/16, 9/16”. Tube ø8 - ø12. Male M8, M10, M12, M15. Male ⅜, ½, ¾, 7/16, 9/16”. Comp. joint ø8 - ø15. Plugin D7- D13. Bore diameter DN10 may be supplied with the following end connections: Female elbow ½, ¾”. Female ½, ¾, 1”. Tube ø8 - ø15. Male M8, M10, M12, M15. Male ½, ¾, 1”. Bore diameter DN13 may be supplied with the following end connections: Female elbow ¾”. Female ¾, 1”. Male ¾, 1”. Bore diameter DN15 may be supplied with the following end connections: Female 1”. Male 1”. Models added July 2021: Male M11 Bore diameter DN10 supplied with the following end connections: Female elbow 3/8”, Female 3/8”, Male 3/8” DN13 supplied with the following end connections: Female elbow ½ Female ½, Tube ø15, Male ½ DN15 supplied with the following end connections: Female elbow ¾ Female ¾, Tube ø15, Male ½, ¾
Marking:
Neoperl, SPX or (from January 2020) Softpex, 70°C, 10bar, DN, size & date of manufacture (YYMMDD) on end connection.
Installation Requirements:
R001 R008
Model:
39.00CD.EFG.HI Softpex® range. Part Code nomenclature constructed in the following manner: - 39.ABCD.EFG.HI A = Hose Type (supply hose, outlet hose, shower hose etc.). B = Hose (inliner) Material CD.EFG = Manufacturing sequential number. HI = Packaging information.
Factor:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Phone
0049 7631 1880
General Email
approvals@neoperl.de

View All Listings by this Company
Manufacturer:
Neoperl GmbH, NPI Italia Srl. Neoflex (Xinhui) Ltd. NEOPERL Nordic A/S. Neoperl Bulgaria EOOD, Neoperl Ibérica S.A.
Company Name
Neoperl GmbH, NPI Italia Srl. Neoflex (Xinhui) Ltd. NEOPERL Nordic A/S. Neoperl Bulgaria EOOD, Neoperl Ibérica S.A.
Address
Klosterrunstrasse 9-11, Mullheim, D-79379
General Email

View All Listings by this Company

Print This Approval


#2007058

Range of interlocked, chrome plated, stainless-steel shower hoses incorporating EPDM washers and a polyethylene liner. Maximum operating temperature 70°C.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
2007058
Expiry date:
31/07/2025
Note:
Open outlet use only.
Size:
½” BSP (F) captive nut.
Marking:
Neoperl, date of manufacture (YYYY/MM) and 21 on crimped connector.
Installation Requirements:
R001
Model:
Chromalux Agraff CRG Hose (G1/2 conicals) - part code: 39.56CD.EFG.HI Chromalux Agraff CRG Hose (G1/2 conical, G1/2 knurled) - part code: 39.56CD.EFG.HI
Factor:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Phone
0049 7631 1880
General Email
approvals@neoperl.de

View All Listings by this Company
Manufacturer:
Neoflex (Xinhui) Limited
Company Name
Neoflex (Xinhui) Limited
Address
No. 3 Yanan Industrial Zone, Yamen Town, Xinhui District, 529149, Jiangmen, Guangdong Province
General Email

View All Listings by this Company

Print This Approval


#2009323

Spring loaded, resilient trim, in-line check valve cartridges, with plastic guides and jumper and NBR rubber seals within a plastic housing. For insertion in pipes and fittings with specifically sized bores. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
2009323
Expiry date:
30/09/2025
Size:
DN25
Marking:
Neoperl, WRAS, flow arrow & DN25 on body.
Installation Requirements:
R001
Model:
OV25/DN25 (31.4225.0)
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Phone
0049 7631 1880

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 5

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.