Methven UK Approvals


#2003382

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated by an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2003382
Expiry date:
31/03/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
DTC ON REAR OF TAP DEVA ON FRONT OF TAP
Installation Requirements:
R001 R006 R010
Model:
SENSOR6/BT COMBINATION TAP ASSEMBLIES
Factor:
Methven UK
Company Name
Methven UK
Address
Brooklands Mill English Street Leigh
Postcode
WN7 3EH
Phone
08001951602
General Email
sales@uk.methven.com

View All Listings by this Company

Print This Approval


#2006075

Single hole, single outlet combination tap assembly (chromium plated brass) incorporating a sequential headworks with single lever operating member to control both the flow and temperature. The outlet incorporates a plastic flow straightener. The product also incorporates a single check valve assembly (verified by test as suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2006075
Expiry date:
30/06/2025
Size:
Stainless steel braided, EPDM lined flexible hose assemblies with a ½” BSP (F) captive nut end connection with a ½” BSP (M) to 15mm compression adaptor.
Marking:
DEVA ON OPERATING MEMBER DTC10 ON BODY
Installation Requirements:
R001 R006 R010
Model:
SOL003
Factor:
Methven UK
Company Name
Methven UK
Address
Brooklands Mill English Street Leigh
Postcode
WN7 3EH
Phone
08001951602
General Email
sales@uk.methven.com

View All Listings by this Company

Print This Approval


#2104801

Wall mounted two hole, double outlet (swivel) combination tap assembly (chromium plated brass) with quarter turn ceramic disc headworks and single lever type operating members. The product is supplied with plastic back nuts. Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0570 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, double outlet, swivel.
WRAS Approval Number:
2104801
Expiry date:
30/04/2026
Size:
½” BSP (M)
Marking:
DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R040
Model:
DLV305WM
Factor:
Methven UK
Company Name
Methven UK
Address
Brooklands Mill English Street Leigh
Postcode
WN7 3EH
Phone
08001951602
General Email
sales@uk.methven.com

View All Listings by this Company

Print This Approval


#2105800

Range of wall mounted shower kit with brass bodies (various finishes) consisting of a shower rail with an overhead shower rose, incorporating a manual diverter to shower handset. Shower handset incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models AOOSCPUK and AOOSBKUK consist of just a shower handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2105800
Expiry date:
31/05/2026
Size:
See model.
Marking:
Methven on shower handset.
Installation Requirements:
R001 R040
Model:
AIO Overhead Shower CP AOOSCPUK – ½” BSP (F) inlet AOOSBKUK – ½” BSP (F) inlet AIO Shower System CP AOSSCPUK – ½” BSP (M) inlet AOSSBKUK – ½” BSP (M) inlet
Factor:
Methven UK
Company Name
Methven UK
Address
Brooklands Mill English Street Leigh
Postcode
WN7 3EH
Phone
08001951602
General Email
sales@uk.methven.com

View All Listings by this Company

Print This Approval


#1912075

Range of wall mounted, two-hole, thermostatic shower valves (chromium plated brass). In models X-KESCT, KESVAL, VISVAL, WISVAL, X-WCT & CTBV01 flow is controlled via a quarter turn ceramic disc headwork with dome or cube operating members. In models 269922, CTBV02, X205112CP, MCTS VO, X-CTBVEF, X-MCT & CTBV03 flow is controlled via a half turn ceramic disc headwork with dome or cube operating members. The temperature is controlled by a thermostatic cartridge with dome or cube type operating members which incorporate a manual override button. The inlets incorporate a stainless-steel strainer and an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1912075
Expiry date:
31/12/2024
Size:
¾" BSP captive nut inlets x ½" BSP (M) outlet
Marking:
DTC37 & METHVEN ON BODY
Installation Requirements:
R001 R010 R040
Model:
X-KESCT, KESVAL, VISVAL, WISVAL, MCTS VO, X-CTBVEF, X-MCT, CTBV03, 269922, CTBV02, X205112CP, X-WCT & CTBV01 thermostatic shower valves
Factor:
Methven UK
Company Name
Methven UK
Address
Brooklands Mill English Street Leigh
Postcode
WN7 3EH
Phone
08001951602
General Email
sales@uk.methven.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 3

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.