Intatec Ltd Approvals


#1912062

Range of wall mounted, two-hole, single shower outlet combination tap assemblies (chromium plated brass). The flow is controlled by a ceramic disc headwork (with various operating members). temperature is controlled VIA a thermostatic cartridge (with various operating members which incorporate a manual override button). Both inlets incorporate approval single check valve cartridges, however the complete unit has not been tested to show it provides back flow protection. Models IN10015CP incorporate elbows. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1912062
Expiry date:
31/12/2024
Size:
Models IN10015CP: ½” X ¾” BSP offset unions. All other models: ¾” captive nut.
Marking:
Intatec logo, model number and date of manufacture (WW/YYYY) on rear body.
Installation Requirements:
R001 R040
Model:
IN10015CP & IN20015CP
Factor:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2003035

Double check valve assembly consisting of two spring loaded resilient trim in-line check valve cartridges housed in a nickel plated DZR brass body. Product also incorporates an isolation valve. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2003035
Expiry date:
31/03/2025
Size:
15mm compression x ½” BSP (M)
Marking:
Intatec logo, CR, size and flow arrow on body.
Installation Requirements:
R001
Model:
FLDCV15X
Manufacturer:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2004011

Wall mounted, exposed bar type thermostatic blending valve (chromium plated brass), incorporating a quarter turn ceramic disc controlling the flow with single lever operating members. The temperature is controlled independently via a thermostatic cartridge with single lever operating members. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2004011
Expiry date:
30/04/2025
Note:
This approval does not include a shower hose and handset.
Size:
20014CP - PLUS BAR SHOWER THERMOSTATIC BLENDING VALVES
Marking:
Intatec and 20014CP on rear of tap body.
Installation Requirements:
R001 R010 R040
Model:
20014CP - Plus Bar Shower.
Manufacturer:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2004045

Range of chrome plated plastic shower handsets with EPDM ‘O’-rings and flow restrictor. Maximum operating temperature 60ºC.

Section:
1650 Shower Outlets
WRAS Approval Number:
2004045
Expiry date:
30/04/2025
Note:
Open out use only.
Size:
½” BSP (M)
Marking:
Intatec logo on body.
Installation Requirements:
R001 R040
Model:
ED300019XX, HS1010CP, HS1007CP, HS1008CP, HS1009CP, PU900002XX & SO81659CP.
Factor:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2007701

Wall mounted exposed thermostatic blending valve (chromium plated brass body) incorporating a half turn ceramic disc headwork controlling the flow to either the overhead shower or hand shower with a dome type operating member. The temperature is controlled via thermostatic cartridge with a manual override button and dome type operating member. The inlets incorporate stainless steel strainers and approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2007701
Expiry date:
31/07/2025
Note:
This approval does not include a shower hose and handset.
Size:
¾” captive nuts
Marking:
Inta logo, model and date of manufacture (MM/YY) on rear of body.
Installation Requirements:
R001 R010 R040
Model:
PU20010CP
Factor:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 5 of 18

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.