Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103353

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

HOSE 1000 available with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring

Marking:

Intatec logo, WRAS and date of manufacture (YYYY) on ferrule

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

HOSE 1000

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Range of in-line hex key operated spherical valves incorporating nickel plated or chromium plated brass bodies and chromium plated brass balls. The compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250415019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model

Marking:

Cottam and Preedy logo, Inta on cap, size, PN25 and date of manufacture (MMYY) on body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

TR15KBV 15mm x 15mm Compression TR22KBV 22mm x 22mm Compression TR28KBV 28mm x 22mm Compression TR35KBV 35mm x 35mm Compression

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (chrome plated brass) bodies. The flow is controlled via a solenoid valve activated via an infra-red sensor. The temperature is controlled independently via a thermostatic cartridge. The products incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets incorporate a stainless-steel strainer. The products are supplied with spherical valves for both inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:

0685 Combination Tap Assembly

Section Subtitle:

Tap(s) with a non-touch method of flow control incorporating temperature control.

WRAS Approval Number:

250504007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” Male BSP.

Marking:

INTA on operating member. Model number and date (WW/YY) on underside of tap.

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2030

Model:

HTMWMMCP - WALL MOUNTED TAP (MAINS OPERATED) HTMWMMRS - WALL MOUNTED REMOVABLE SPOUT TAP (MAINS OPERATED) HTMWMBRS - WALL MOUNTED REMOVABLE SPOUT TAP (BATTERY OPERATED) HTMWMBCP - WALL MOUNTED TAP (BATTERY OPERATED)

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company