IDC Plumbing & Heating Technology (Beijing) Ltd Approvals

#2010340

Drain off valve with brass body (chrome plated) and NBR ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
1770 Taps
Section Subtitle:
Draining, for above ground use only.
WRAS Approval Number:
2010340
Size:
¼” BSP (M) x 10mm Spigot.
Marking:
Edison logo (trade-mark of factor: E mark (~E~ within circle)) and on body.
Installation Requirements:
R001 R511
Expiry date:
31/10/2025
Model:
224358
Product Images
Approval Holder:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou
General Email

View All Listings by this Company

Print This Approval

#2012022

Range of high and low pressure diaphragm float operated valves with brass body & brass drop arm lever. The valves discharge from an up and over arrangement. Maximum working pressure 14.0 bar (model 1FVB004) or 3.0 bar (model FVB104). For cold water use only.

Section:
2080 Valves
Section Subtitle:
Float operated, diaphragm, metal.
WRAS Approval Number:
2012022
Size:
½” BSP Male.
Marking:
IDC - E logo. & BS1212/2 on body.
Installation Requirements:
R001
Expiry date:
31/12/2025
Model:
1FVB004 & 1FVB104.
Product Images
Approval Holder:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co. Ltd.
Company Name
IDC Fluid Control Co. Ltd.
Address
3RD FLOOR UNIT 2 SECTION A
General Email

View All Listings by this Company

Print This Approval

#2101017

Range of threaded fittings with either plain brass, nickel plated brass or chrome plated brass bodies. Maximum operating pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
1530 Miscellaneous Fittings
Size:
Plain brass bodies: 1/8" to 4" BSP. Nickel plated or chrome plated brass bodies: 1/8" - 1" BSP.
Marking:
‘E’ (brand of factor) & size on body.
Installation Requirements:
R001
Expiry date:
31/01/2026
Model:
IDC 25 range comprising of: Hexagon Nipple M x M Thread Bush Mi x Fi Flanged Blanking Nut RUNNING NIPPLE M x M SPACER NIPPLE M x M BARREL NIPPLE M x M Pipe Nipple M x M Thread Fi x Mi adaptor Thread Fi xFi Straight Reduce M x M adaptor Straight reduce M x F adaptor Straight reduce F x F adaptor Blanking cap Blanking Plug Elbow F x F adaptor Elbow reduce F x F adaptor Elbow M x M adaptor Elbow F x M adaptor Elbow F x F Wall plate TEE F x F x F TEE Reduce F x F x F Cross F x F x F x F Straight Pipe union M x F Straight Pipe union F x F Elbow Pipe union F x F
Product Images
Approval Holder:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang
General Email

View All Listings by this Company

Print This Approval

#2105024

Range of brass compression fittings for use with copper pipe (manufactured to IS EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:
1100 Fittings and Pipe - Compatible Systems
Section Subtitle:
Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2105024
Size:
See model
Marking:
IDC logo: E mark (~E~ within circle) on fitting body. Size on nut.
Installation Requirements:
R001
Expiry date:
31/05/2026
Model:
Straight Coupling C x C: BF3104: 1¼” compression, BF3105: 1½” compression. Straight coupler M x C: BF3114: 1¼" BSP (M) x 1¼" compression, BF3115: 1½" BSP (M) x 1½" compression. Straight coupler F x C: BF3124: 1¼" BSP (F) x 1¼" compression, BF3125: 1½" BSP (F) x 1½" compression. Elbow C x C: BF3154: 1¼” compression, BF3155: 1½” compression. Elbow M x C: BF3164: 1¼" BSP (M) x 1¼" compression, BF3165: 1½" BSP (M) x 1½" compression. Elbow F x C: BF3174: 1¼" BSP (F) x 1¼" compression, BF3175: 1½" BSP (F) x 1½" compression. TEE C x C x C: BF3184: 1¼" compression, BF3185: 1½" compression. Tank Connector: BF3504: 1¼" compression, BF3505: 1½" compression. Stop End: BF3514: 1¼" compression, BF3515: 1½" compression. Blanking cap: BF3724: 1¼" compression, BF3725: 1½" compression. Blanking Plug: BF0744:1¼" compression, BF0745:1½" compression. Models added October 2021; Straight Coupling C x C: BF3106: 2” compression. Straight coupler M x C: BF3116: 2” BSP (M) X 2” compression. Straight coupler F x C: BF3126: 2" BSP (F) x 2" compression, Elbow C x C: BF3156: 2” compression. Elbow M x C: BF3166: 2" BSP (M) x 2" compression. Elbow F x C: BF3176: 2" BSP (F) x 2" compression. TEE C x C x C: BF3186: 2” compression. Tank Connector: BF3506: 2” compression.
Product Images
Approval Holder:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Print This Approval

#2107085

Range of gate valves with brass bodies, brass wedges and PTFE seals. The valves are operated via a non-rising spindle with a hand wheel operating member. To be used with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
2107085
Size:
See model
Marking:
IDC logo (~E~ within a circle) and size on body.
Installation Requirements:
R001
Expiry date:
31/07/2026
Model:
1GVA106: ½” compression. 1GVA108: ¾” compression. 1GVA110: 1” compression.
Product Images
Approval Holder:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang
General Email

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 2 of 8

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.